Lush Food & Drink

Buying Guide ·Baking

Best Cake Turntables That Fit Under a Cabinet

The deciding specification is the published height, because the plate is already sitting between 3.7 and 6 inches above the counter before the cake goes on it.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

I read eight cake turntable listings for every height, rotation, grip and washing statement, then set the published heights against what each stand is made of.

Our shortlist

Five products, one set of published numbers.
  1. Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St...
    Best for guiding lines on a low plate

    Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St...

    The lowest published lift here, with centering lines on the plate.

    • RICCLE
    • 12"
    • 5.05 lb
  2. Kootek 12" Silver Aluminum Alloy Cake Turntable
    Best for a maker that says how to wash it

    Kootek 12" Silver Aluminum Alloy Cake Turntable

    Hand wash, no dishwasher, keep dry, and a low heavy plate.

    • Kootek
    • 12 Inch
    • 5.2 lb
  3. Ateco Revolving Cake Decorating Stand
    Best for a base that will not slide

    Ateco Revolving Cake Decorating Stand

    A silicone cap under an aluminum base on stainless bearings.

    • Ateco
    • #615 12" Round, Aluminum Base
    • 4.8 lb
  4. Cake Stand Rotating 12"
    Best for moving it off the counter one handed

    Cake Stand Rotating 12"

    The only listing that states all three of its own dimensions.

    • himaly
    • 12.2"
    • 2 lb
  5. Winco Stainless Steel Round Cake Stand
    Best for displaying a cake rather than icing it

    Winco Stainless Steel Round Cake Stand

    A stainless stand that never claims to rotate.

    • Winco
    • 13"
    • 1.8 lb

Side by side

Blank means the maker does not publish it.
ModelBrandSize (capacity)WeightBest for
Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St... RICCLE 12" 5.05 lb Best for guiding lines on a low plate
Kootek 12" Silver Aluminum Alloy Cake Turntable Kootek 12 Inch 5.2 lb Best for a maker that says how to wash it
Ateco Revolving Cake Decorating Stand Ateco #615 12" Round, Aluminum Base 4.8 lb Best for a base that will not slide
Cake Stand Rotating 12" himaly 12.2" 2 lb Best for moving it off the counter one handed
Winco Stainless Steel Round Cake Stand Winco 13" 1.8 lb Best for displaying a cake rather than icing it

Each pick in detail

What the listing says for it, and against it.
1 Best for guiding lines on a low plate

Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St...

The lowest published lift here, with centering lines on the plate.

  • For it
  • Publishes 3.7 inches of height, the lowest lift among these five
  • Guiding lines on the plate for positioning a cake or board
  • Hidden stainless steel ball bearings, stated 360 degrees either way
  • Published at 5.05 lb, so the mass is in the base
  • Against it
  • Asks you to wipe it dry after every use, with no washing method named
  • Publishes no grip under the base, only a non slip surface on top
  • Its width field of 7 inches describes the base rather than the plate
2 Best for a maker that says how to wash it

Kootek 12" Silver Aluminum Alloy Cake Turntable

Hand wash, no dishwasher, keep dry, and a low heavy plate.

  • For it
  • The clearest washing statement of these five: hand wash, no dishwasher, keep dry
  • Publishes 3.77 inches of height on a 12 inch plate at 5.2 lb
  • Hidden ball bearings turning clockwise or anti clockwise
  • A non slip surface, rubber feet and guiding lines on the plate
  • Against it
  • The heaviest pick here at 5.2 lb, so it is a two handed lift
  • Names aluminum alloy without a grade
  • Says nothing about what happens if the bearing gets wet
3 Best for a base that will not slide

Ateco Revolving Cake Decorating Stand

A silicone cap under an aluminum base on stainless bearings.

  • For it
  • A non slip silicone cap on the base, stated to stop sliding
  • An aluminum base and turntable with stainless steel ball bearings
  • The only listing that tells you plainly not to submerge it
  • Published at 4.8 lb, from a maker making decorating tools since 1905
  • Against it
  • Publishes two different heights, 5 inches in the field and 4 in its bullet
  • No guiding lines on the plate
  • Says nothing about left or right handed use
4 Best for moving it off the counter one handed

Cake Stand Rotating 12"

The only listing that states all three of its own dimensions.

  • For it
  • States all three of its own dimensions, 12.2 by 7 by 5.3 inches
  • Published at 2 lb, light enough to move with one hand
  • A stainless steel bearing stated for 360 degree rotation
  • A non slip surface and rubber feet, with a stainless plate and stand
  • Against it
  • At 5.3 inches it is among the taller lifts here
  • Its cleaning statement goes no further than easy to clean
  • No guiding lines on the plate
5 Best for displaying a cake rather than icing it

Winco Stainless Steel Round Cake Stand

A stainless stand that never claims to rotate.

  • For it
  • A 13 inch stainless plate, the largest here
  • Published at 1.8 lb, the lightest stand on this page
  • Stainless steel, stated corrosion resistant
  • Easy assembly, stated for flexible setup
  • Against it
  • Never claims to rotate, so it is not a decorating turntable
  • Publishes 6 inches of height, the most lift here
  • Publishes no grip feature and no washing statement

Our verdict

RICCLE and Kootek publish the lowest lifts at 3.7 and 3.77 inches, both heavy aluminum plates on hidden bearings with guiding lines. Ateco publishes 5 inches in its field and 4 inches in its own bullet. himaly publishes 5.3 inches at 2 lb and states all three of its dimensions. Winco is 6 inches on a 13 inch stainless plate and never claims to rotate at all.

“The plate is already 3.7 inches up before the cake is.”

Lush Editorial Team

What separates these five

Heights run from 3.7 inches to 6 RICCLE at 3.7 and Kootek at 3.77 are the low plates. himaly publishes 5.3 and Winco 6, and Ateco publishes 5 in its field against 4 in its own bullet.
One of these does not turn Winco's five bullets describe stainless steel, a round design, easy assembly and sturdy support, and never mention rotating, spinning or a bearing.
Low plates are the heavy ones The two stands under 4 inches weigh 5.05 lb and 5.2 lb. The two over 5 inches weigh 2 lb and 1.8 lb, because height comes from a hollow stem.
Three listings say keep it dry Hand wash and no dishwasher on the Kootek, do not submerge on the Ateco, wipe dry after every use on the RICCLE. Two picks say nothing useful.
Two plates carry guiding lines RICCLE and Kootek both print lines for positioning a cake board. The other three publish a plain plate.

How we chose

Priorities, not a computed score. The inputs are published specifications, so we rank by what matters most and say how much.

  1. 30% Height publishedOn a tight counter the cabinet above decides the working room.
  2. 25% Rotation statedOne of the five never claims to rotate at all.
  3. 20% Published weightIt explains the height and it decides how the stand is handled.
  4. 15% Washing statementThree of five give one and a sealed bearing makes it matter.
  5. 10% Grip under the baseFour publish something and one publishes nothing.

How the Five Compare on the Numbers

A turntable is a lift as well as a footprint. Before the cake goes on, the plate is already sitting somewhere between 3.7 and 6 inches above the counter, and on a tight counter the ceiling is usually the underside of a wall cabinet. A three layer cake on a 6 inch stand is a very different object from the same cake on a 3.7 inch one.

All five picks publish that figure, and it is the one nobody has compared. Two further things fall out of reading for it: one listing gives two different heights in the same page, and one of these five never claims to rotate at all.

Specification RICCLE aluminum stand Kootek aluminum stand Ateco 615 stand himaly aluminum stand Winco steel stand
Height published, inches 3.7 3.77 5 in the field, 4 stated in the listing 5.3 6
Rotation stated 360 degrees, on hidden stainless ball bearings 360 degrees, clockwise or anti clockwise, on hidden ball bearings Stainless steel ball bearings, smooth and steady 360 degrees, on a stainless steel bearing not published
Plate size stated, inches 12 12 12 12.2 13
Published weight 5.05 lb 5.2 lb 4.8 lb 2 lb 1.8 lb
Grip stated A non slip rubber surface A non slip surface and rubber feet A non slip silicone cap on the base A non slip surface and rubber feet not published
Washing stated Wipe it dry and clean after every use Hand wash recommended, not suitable for a dishwasher, keep dry Wipe with a damp cloth, do not submerge in water Stated very easy to clean not published
Material stated Aluminum alloy, with stainless bearings Aluminum alloy An aluminum base and turntable with stainless bearings Heavy aluminum alloy, with a stainless plate and stand Stainless steel
Guiding lines on the plate Yes Yes not published not published not published
Assembly stated not published not published not published not published Easy assembly, for flexible setup
Left or right handed use stated Yes, both Yes, both not published not published not published
Dimension fields, inches 7 by 12 by 3.7 12 by 12 by 3.77 12 by 12 by 5 7 by 12.2 by 5.3 13 by 13 by 6

Several listings on the fact sheet are not here because none of them publishes a height for the stand. One is a sixteen piece decorating set whose dimension fields describe its carton. One publishes zeros in all three dimension fields, which is not a measurement. The third has a single feature bullet that repeats its own product name and says nothing else.

How Much Height the Stand Adds

From 3.7 Inches to 6

RICCLE and Kootek are the two low stands, publishing 3.7 and 3.77 inches, and both are heavy aluminum plates on hidden bearings rather than pedestals. Under a wall cabinet that difference buys real working room: with a 4 inch layer cake and a piping bag your hand has to clear the top of the cake, and a stand published at 6 inches takes 2.3 inches more of that clearance than one published at 3.7.

Winco is at the other end at 6 inches, on a 13 inch stainless plate at 1.8 lb. himaly publishes 5.3 inches and states its own three dimensions in a bullet, 12.2 by 7 by 5.3, which is the only one of these five that measures itself completely in its own words rather than leaving it to a field.

The Listing That Publishes Two Heights

Ateco publishes 5 inches in its dimension field and states in its own bullet that the turntable measures 12 inches in diameter and stands 4 inches high. Those cannot both be right, and an inch matters on this page more than it would on most. This page quotes both and treats the maker’s sentence as the better figure, as it does everywhere else.

The rest of that listing is the most specific of the five about construction: an aluminum base and turntable with stainless steel ball bearings, a non slip silicone cap on the base to stop it sliding, and a maker that has been making decorating tools since 1905. It is also the only listing here that tells you plainly not to submerge the stand.

What the Height Is Made Of

A Low Plate, or a Pedestal

The two low stands are the two heavy ones. RICCLE publishes 5.05 lb and Kootek 5.2 lb, both aluminum alloy, and in both cases the mass sits in the base rather than in a column, which is why they are low and why they stay put. Both also print guiding lines on the plate for centering a cake board, which nothing else here does.

The two tall stands are the two light ones, at 2 lb and 1.8 lb. That is the trade in plain form: height comes from a stem, a stem is hollow, and a hollow stem weighs little and is easier to nudge. himaly counters with a non slip surface and rubber feet, and Winco publishes no grip feature at all.

One of These Does Not Turn

Winco is a cake stand rather than a cake turntable, and it is worth saying outright. Its five bullets describe stainless steel, a round design, easy assembly, a sleek appearance and sturdy support, and not one of them mentions rotating, spinning, a bearing or a swivel. Every other pick states 360 degree rotation and names a bearing.

It is included because it answers the height question at the top of the range and because a 13 inch stainless display stand at 1.8 lb is a genuinely useful thing on a tight counter, just not for decorating. If you are frosting a cake and turning it as you go, the four aluminum stands are the ones that do that job.

Washing It in a Kitchen With No Room

Three Listings Say Keep It Dry

These stands have a sealed bearing inside them, and three of the five say what that means. Kootek is the most explicit: hand wash recommended, not suitable for a dishwasher, and keep it dry after washing. Ateco says wipe with a damp cloth and do not submerge in water. RICCLE says wipe it dry and clean after every use.

That is a real constraint on a small counter, because a heavy aluminum stand that cannot be filled with water or left in a rack has to be wiped where it stands and then put away dry. None of the three says what happens if the bearing does get wet, which is the one thing a buyer would want to know.

Two Say Almost Nothing

himaly says the polished plate and the stand are both easy to clean regardless of how much cream is left on the surface, and stops there, with no instruction about submerging or drying. Winco publishes no cleaning statement at all, which is less of a problem for a stand with no bearing in it.

Among these five, only two listings actually forbid anything. For a tool that is used with buttercream and then set aside on a crowded counter, the silence in the other three is the most useful thing this page found and the least satisfying.

Which One Fits Your Kitchen

The counter with a cabinet close above it. RICCLE publishes 3.7 inches of height on a 12 inch aluminum plate at 5.05 lb, with hidden stainless bearings, a non slip rubber surface and guiding lines for centering a board. Wipe it dry after every use.

The baker who wants the care instructions in writing. Kootek publishes 3.77 inches and 5.2 lb on a 12 inch aluminum alloy plate with hidden ball bearings turning either way, rubber feet, guiding lines, and the clearest washing statement here: hand wash, no dishwasher, keep dry.

The stand that has to stay put. Ateco publishes an aluminum base and turntable on stainless bearings with a non slip silicone cap, at 4.8 lb. Its height is given as 5 inches in the field and 4 inches in its own bullet, so measure your clearance against the larger figure.

The stand you lift off the counter between jobs. himaly states its own size, 12.2 by 7 by 5.3 inches, at 2 lb, with a stainless bearing, a non slip surface and rubber feet. It is light enough to move one handed and tall enough to notice under a cabinet.

The cake that only has to be displayed. Winco is a 13 inch stainless steel stand at 6 inches high and 1.8 lb, with easy assembly and a sturdy base. It never claims to rotate, so it is a serving stand rather than a decorating turntable.

What We Could Not Verify

These are the figures and statements we went looking for in the manufacturer listings and could not find. Nothing below was estimated, and nothing on this page was measured by us.

  • A published height on the fact sheet listings that were left out, which is why none of them is a pick.
  • Whether the Ateco stand is 4 inches or 5 inches high, since its listing publishes both.
  • Whether the Winco stand rotates at all, which its five bullets never mention.
  • What happens if water gets into the bearing on any of the four turntables.
  • Any washing instruction from the Winco listing, and anything beyond easy to clean from the himaly.
  • A grip or non slip feature on the Winco stand, which publishes none.

Frequently asked questions

How much height does a cake turntable add?+

Between 3.7 and 6 inches across these five, and the figure is published on all of them. RICCLE states 3.7 inches and Kootek 3.77, both low aluminum plates. himaly publishes 5.3 inches and Winco 6. Ateco is the awkward one, publishing 5 inches in its dimension field while its own bullet says the stand is 4 inches high. On a counter with a cabinet above, that range is worth measuring.

Why are the low turntables the heavy ones?+

Because height on a stand like this comes from a stem, and a stem is hollow. The two picks under 4 inches weigh 5.05 lb and 5.2 lb, with the mass in a solid aluminum base, which is also what keeps them still while you drag a scraper round a cake. The two over 5 inches weigh 2 lb and 1.8 lb and both rely on rubber feet or nothing at all.

Does the Winco stand rotate?+

Its listing never says so, and this page treats that as the answer rather than assuming. Its five bullets describe stainless steel construction, a round design, easy assembly, a sleek appearance and sturdy support, with no mention of rotating, spinning, a swivel or a bearing anywhere. Every other pick here states 360 degree rotation and names the bearing it turns on, so the omission reads as deliberate.

Can these be washed in a sink?+

Three of the five address it and all three say be careful. Kootek states hand wash recommended, not suitable for a dishwasher, and keep dry after washing. Ateco states wipe with a damp cloth and do not submerge in water. RICCLE asks you to wipe it dry and clean after every use. All of them have a sealed bearing inside, and none of the three says what happens if water gets into it.

What do the guiding lines on the plate do?+

They mark concentric circles so a cake board can be placed centered on the first attempt, which matters because an off center cake wobbles visibly as the plate turns. RICCLE and Kootek both publish them. Ateco, himaly and Winco publish a plain plate, which is not a fault so much as a job you do by eye or with a scored board of your own.

Why were three listings left out?+

Because none of them publishes a height, which is what this page ranks on. One is a sixteen piece decorating set whose dimension fields describe the carton rather than the stand. One publishes zeros in all three dimension fields, which is not a measurement of anything. The third has a single feature bullet that repeats its own product name and publishes nothing about rotation, grip or care.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.