Lush Food & Drink

Buying Guide ·Coffee

Best French Press Filters for the Press You Own

The deciding specification is which press the filter is actually for, because the same 34 ounce jug is served by filters stated at 3.6, 3.82 and 4 inches, one listing publishes a fit range instead of a figure, and one publishes no diameter at all.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

I compared published press capacities in ounces, cups and milliliters against stated filter diameters, fit ranges, named machine models, pack counts, extra parts and package figures across sixteen French press filter listings.

Our shortlist

Five products, one set of published numbers.
  1. 2.6 Inch Filter Parts for 350ml French Press 3 Piece...
    Best for a small press and a stated fit range

    2.6 Inch Filter Parts for 350ml French Press 3 Piece...

    The only listing in this pool that publishes a range rather than a single figure: a 2.6 inch screen stated to fit an inner diameter between 2.09 and 2.56 inches, for a 350 milliliter press also described as 12 ounces. Three stainless pieces arrive including a spiral disk, they are stated reusable and easy to clean, and the package figure is 2.99 by 2.99 by 0.63 inches. The listing asks you to compare the size carefully before ordering.

    • Sivaphe
    • 12oz-3pieces
    • Weight not listed
  2. Secura French Press Replacement Screens
    Best for a maker that names the machines

    Secura French Press Replacement Screens

    A four piece set stated at 3.82 inches for a 34 ounce or 1 liter press, and the only listing in this pool that answers the compatibility question properly: it lists eight specific machine model numbers the mesh replaces rather than claiming to fit most presses. Two bullets in total, no diameter tolerance, no mesh count and no weight, with a package figure of 3.8 by 3.9 by 0.7 inches.

    • Secura
    • 3.82 inch for 34 oz
    • 0.04 lb
  3. 4 Pack French Press Filters 4.5 inch
    Best for a twelve cup press

    4 Pack French Press Filters 4.5 inch

    The only pick here for a large jug: a 4.5 inch screen stated for 50 ounce, 12 cup or 1500 milliliter presses, in a four pack of 304 stainless with a 100 mesh ultra fine screen, a folded edge and a reinforced center ring the listing ties directly to the mesh staying flat under the plunger. Its package figure reads 4.5 by 4.5 by 0.07 inches, and it asks you to measure your original filter before ordering.

    • IBETTERN
    • 50oz screens
    • Weight not listed
  4. 8 Pieces French Press Replacement Parts Stainless St...
    Best for spiral and cross discs in the set

    8 Pieces French Press Replacement Parts Stainless St...

    Eight pieces for a 34 ounce press: six stainless mesh screens plus one spiral disc and one cross disc, which the listing states connect to the runner rod, so a worn plunger assembly can be rebuilt rather than replaced. The mesh is 304 stainless, stated to hold back 99 percent of used grounds. Its title says 3.6 inches, a bullet says 3.75, and its size field says 4 inch, with a package figure of 3.7 by 3.7 by 0.6 inches.

    • YMMIND
    • 4 Inch
    • Weight not listed
  5. French Press Coffee Filter Replacement - 6 Pack Stai...
    Best for a listing that quotes cups only

    French Press Coffee Filter Replacement - 6 Pack Stai...

    Six 304 stainless mesh filters stated compatible with most 1 to 8 cup coffee presses, which spans more press sizes than any other claim in this pool and is the only one made without a diameter attached. The listing states a detachable structure for quick rinsing, rust and corrosion resistance, and long term reuse, and publishes no diameter, no mesh count, no weight and no package figure of any kind.

    • MEET GREAT
    • STANDARD
    • Weight not listed

Side by side

Blank means the maker does not publish it.
ModelBrandSize (capacity)WeightBest for
2.6 Inch Filter Parts for 350ml French Press 3 Piece... Sivaphe 12oz-3pieces not published Best for a small press and a stated fit range
Secura French Press Replacement Screens Secura 3.82 inch for 34 oz 0.04 lb Best for a maker that names the machines
4 Pack French Press Filters 4.5 inch IBETTERN 50oz screens not published Best for a twelve cup press
8 Pieces French Press Replacement Parts Stainless St... YMMIND 4 Inch not published Best for spiral and cross discs in the set
French Press Coffee Filter Replacement - 6 Pack Stai... MEET GREAT STANDARD not published Best for a listing that quotes cups only

Each pick in detail

What the listing says for it, and against it.
1 Best for a small press and a stated fit range

2.6 Inch Filter Parts for 350ml French Press 3 Piece...

The only listing in this pool that publishes a range rather than a single figure: a 2.6 inch screen stated to fit an inner diameter between 2.09 and 2.56 inches, for a 350 milliliter press also described as 12 ounces. Three stainless pieces arrive including a spiral disk, they are stated reusable and easy to clean, and the package figure is 2.99 by 2.99 by 0.63 inches. The listing asks you to compare the size carefully before ordering.

  • For it
  • The only fit range in this pool, an inner diameter of 2.09 to 2.56 inches
  • States the press as 350 milliliters and also as 12 ounces
  • A spiral disk included with the three pieces
  • Publishes a package figure of 2.99 by 2.99 by 0.63 inches
  • Against it
  • A 2.6 inch screen fits nothing larger than a small press
  • Publishes no mesh count and no steel grade
  • Three pieces is the smallest pack on this page
2 Best for a maker that names the machines

Secura French Press Replacement Screens

A four piece set stated at 3.82 inches for a 34 ounce or 1 liter press, and the only listing in this pool that answers the compatibility question properly: it lists eight specific machine model numbers the mesh replaces rather than claiming to fit most presses. Two bullets in total, no diameter tolerance, no mesh count and no weight, with a package figure of 3.8 by 3.9 by 0.7 inches.

  • For it
  • Names eight specific machine models the mesh replaces
  • States 3.82 inches, a figure no other listing in this pool uses
  • States the press as 34 ounces and also as 1 liter
  • A four piece set
  • Against it
  • Two bullets in total, so almost nothing else is published
  • Publishes no mesh count, no steel grade and no weight
  • Naming models is only useful if you own one of those eight machines
3 Best for a twelve cup press

4 Pack French Press Filters 4.5 inch

The only pick here for a large jug: a 4.5 inch screen stated for 50 ounce, 12 cup or 1500 milliliter presses, in a four pack of 304 stainless with a 100 mesh ultra fine screen, a folded edge and a reinforced center ring the listing ties directly to the mesh staying flat under the plunger. Its package figure reads 4.5 by 4.5 by 0.07 inches, and it asks you to measure your original filter before ordering.

  • For it
  • The only pick here for a 50 ounce, 12 cup or 1500 milliliter press
  • States a 100 mesh ultra fine screen in 304 stainless
  • A reinforced center ring tied to the mesh staying flat under pressure
  • A folded edge stated at 4.5 inches
  • Against it
  • Its package figure of 0.07 inches is thinner than four discs stacked
  • Publishes no weight
  • A 4.5 inch screen will not serve the 34 ounce presses most of this pool targets

Who should skip this: Skip this if counter or storage space is tight: it has the largest published footprint of the five, 4.5 by 4.5 inches.

4 Best for spiral and cross discs in the set

8 Pieces French Press Replacement Parts Stainless St...

Eight pieces for a 34 ounce press: six stainless mesh screens plus one spiral disc and one cross disc, which the listing states connect to the runner rod, so a worn plunger assembly can be rebuilt rather than replaced. The mesh is 304 stainless, stated to hold back 99 percent of used grounds. Its title says 3.6 inches, a bullet says 3.75, and its size field says 4 inch, with a package figure of 3.7 by 3.7 by 0.6 inches.

  • For it
  • Eight pieces, six mesh screens plus a spiral disc and a cross disc
  • The discs are stated to connect to the runner rod
  • 304 stainless stated safe hot and cold
  • States the mesh holds back 99 percent of used grounds
  • Against it
  • Its title says 3.6 inches, a bullet says 3.75 and its size field says 4 inch
  • Publishes no mesh count behind the phrase higher density
  • Publishes no weight
5 Best for a listing that quotes cups only

French Press Coffee Filter Replacement - 6 Pack Stai...

Six 304 stainless mesh filters stated compatible with most 1 to 8 cup coffee presses, which spans more press sizes than any other claim in this pool and is the only one made without a diameter attached. The listing states a detachable structure for quick rinsing, rust and corrosion resistance, and long term reuse, and publishes no diameter, no mesh count, no weight and no package figure of any kind.

  • For it
  • States compatibility from 1 cup up to 8, a span no other listing here claims
  • Six filters in the pack
  • 304 stainless stated rust and corrosion resistant
  • A detachable structure stated for quick rinsing
  • Against it
  • Publishes no diameter at all, so the claim cannot be checked
  • Publishes no mesh count, no weight and no package figure
  • A single filter that fits a 1 cup and an 8 cup press is a large claim

Our verdict

Sivaphe states 2.6 inches for a 350 milliliter press and is the only listing here that publishes a fit range, an inner diameter of 2.09 to 2.56 inches. Secura states 3.82 inches for 34 ounces or 1 liter and names eight machine model numbers. IBETTERN states 4.5 inches for 50 ounces, 12 cups or 1500 milliliters. YMMIND states 3.6 inches in its title and 3.75 in a bullet. MEET GREAT states 1 to 8 cups and no diameter.

“One jug, three different diameters, all called universal.”

Lush Editorial Team

What separates these five

One jug, three diameters The same 34 ounce press is served by filters stated at 3.6 inches, 3.82 and 4 across this pool, and every one of those listings calls itself universal.
The only fit range here Sivaphe states its 12 ounce screen fits an inner diameter between 2.09 and 2.56 inches. Every other listing publishes one figure and asks you to measure.
One listing names the machines Secura lists eight model numbers the mesh replaces. Two other listings in this pool name fifteen press brands each, in identical wording.
Not one weight among five None of these five publishes a weight, and two listings elsewhere in the pool had weight fields discarded as close to zero. A disc of mesh weighs almost nothing.
A four pack 0.07 inches thick IBETTERN publishes a package figure of 4.5 by 4.5 by 0.07 inches for four screens. Four folded steel discs with reinforced rings are not that thin.

How we chose

Priorities, not a computed score. The inputs are published specifications, so we rank by what matters most and say how much.

  1. 30% Which press the filter is forSivaphe states 350 milliliters and 12 ounces. Secura states 34 ounces and 1 liter. IBETTERN states 50 ounces, 12 cups and 1500 milliliters. YMMIND states 34 ounces. MEET GREAT states 1 to 8 cups. Five listings and four different unit systems, and only one of the five gives the same press in three units so a buyer can match whichever one is printed on their jug.
  2. 25% Whether the diameter can be trustedFour of five publish one and one of those four publishes three. YMMIND states 3.6 inches in its title, 3.75 in a bullet and 4 inch in its size field, for the same 34 ounce press. Secura states 3.82 inches for the same capacity, and six listings elsewhere in this pool state 4 inches for it. That spread is nearly half an inch on a part that either seals or does not.
  3. 20% Whether anything narrows the guessSivaphe alone publishes a range, stating its 12 ounce screen fits an inner diameter between 2.09 and 2.56 inches. Secura alone names the machines, listing eight model numbers. Both approaches answer the question a single diameter leaves open. The other three ask you to measure your original filter, which is sound advice and not a specification.
  4. 15% What else is in the packYMMIND supplies six mesh screens plus a spiral disc and a cross disc, stated to connect to the runner rod, so a worn assembly can be rebuilt. Sivaphe supplies a spiral disk with its three screens. IBETTERN, Secura and MEET GREAT supply mesh only, in fours and sixes. For a family press that gets used daily the discs are the parts that wear alongside the mesh.
  5. 10% How fine the mesh isOne of these five publishes a figure: IBETTERN states 100 mesh. YMMIND says higher density and 99 percent of grounds without a count. MEET GREAT, Secura and Sivaphe say fine or ultra fine and nothing more. Six listings elsewhere in this pool also state 100 mesh, so the number exists in the category and four of these five chose not to give it.

How the Five Compare on the Numbers

A replacement filter is a disc of mesh and a ring, and the only question that matters is whether it fits. That should be simple. It is not, because a French press beaker is not a standardized part, and the listings answer the question in four different unit systems while several of them disagree with themselves about the diameter.

For the common 34 ounce jug this pool contains filters stated at 3.6 inches, at 3.82 and at 4, and every one of them describes itself as universal. Two listings do better than a bare figure: one publishes a fit range and one names the machines it replaces. Those two are worth more than any of the rest on the only axis that counts.

Specification Sivaphe Secura IBETTERN YMMIND MEET GREAT
Press capacity stated 350 ml, also 12 oz 34 oz, also 1 liter 50 oz, 12 cups, 1500 ml 34 oz 1 to 8 cups
Filter diameter stated 2.6 in 3.82 in 4.5 in 3.6 in in the title, 3.75 in a bullet not published
Fit range published Inner diameter 2.09 to 2.56 in not published not published not published not published
Machine models named not published Eight model numbers not published not published not published
Pieces in the pack Three Four Four Eight, six mesh and two discs Six
Other parts included Spiral disk not published not published Spiral disc and cross disc not published
Mesh count stated not published not published 100 mesh not published not published
Steel grade stated Stainless, no grade Stainless, no grade 304 stainless 304 stainless 304 stainless
Reinforced ring stated not published not published Reinforced center ring not published not published
Published weight not published not published not published not published not published
Package figure published 2.99 x 2.99 x 0.63 in 3.8 x 3.9 x 0.7 in 4.5 x 4.5 x 0.07 in 3.7 x 3.7 x 0.6 in not published
Cleaning wording Rinse and reuse not published Rinse under running water Rinse under running water Detachable, quick rinse
Fit warning stated Compare size before ordering not published Measure your original filter Check the size carefully not published

What the table cannot tell you is how thick the mesh wire is or how tall the folded edge stands. Neither figure appears anywhere in this pool, and both decide whether a screen holds its shape after a few dozen plunges. Nor does any listing here publish a weight, which for a part sold in packs of three to eight would at least confirm the steel is there.

One Jug, Three Diameters

Thirty Four Ounces at 3.6, 3.82 and 4 Inches

The 34 ounce, 8 cup, 1000 milliliter press is the size this whole category is built around, and this pool cannot agree on what diameter its filter is. YMMIND’s title says 3.6 inches. Secura says 3.82. Six listings elsewhere in the pool say 4 inches, one of them adding 100 millimeters in brackets to be certain about it.

Half an inch of disagreement is not a rounding difference on a part whose whole job is to seal against a glass wall. Too small and grounds slip round the edge into the cup. Too large and the screen will not seat under the plunger. What every one of those listings says is that it fits most presses, which is a claim none of them can hold simultaneously.

The Only Listing That Names the Machine

Secura takes the one approach that removes the guesswork entirely. Its listing runs to two bullets and the first is a list of eight specific machine model numbers the mesh replaces, alongside a stated 3.82 inches for a 34 ounce or 1 liter press. If you own one of those eight machines the compatibility question is closed.

The cost is everything else. No mesh count, no steel grade, no weight, no cleaning instruction and no fit tolerance, in a listing shorter than any other in this pool. Two other listings here name fifteen press brands each, in wording identical to one another, which is a broader claim made with less precision.

The Only Fit Range in the Pool

Between 2.09 and 2.56 Inches

Sivaphe publishes the single most useful line in this whole pool: the 12 ounce screen fits an inner diameter between 2.09 inches and 2.56 inches. That is a tolerance, and it turns a purchase from a gamble into a measurement. The screen itself is stated at 2.6 inches, for a press described as 350 milliliters and also as 12 ounces.

Three stainless pieces arrive including a spiral disk, and the package figure is 2.99 by 2.99 by 0.63 inches. The listing also asks you to compare the size carefully before ordering, which is the same request three other picks make, except here you are given the numbers to compare against.

Why a Range Beats a Figure

A single diameter tells you what the disc measures. A range tells you what the press can be. Those are different facts and the second is the one a buyer needs, because the variable is the jug rather than the filter. Sivaphe is aimed at small presses, so its range is narrow in absolute terms, and the principle would apply just as usefully at 4 inches.

Nothing else in this pool attempts it. IBETTERN, YMMIND and Sivaphe all tell you to measure your original filter first, which is honest advice and leaves you comparing your measurement against a single number with no stated tolerance. For a family press used every day, buying the wrong size twice costs more than the filters do.

What Nobody Publishes

Not One Weight Among Five

None of these five publishes a weight. Two listings elsewhere in this pool did publish one and both figures were close enough to zero to be discarded, which is what happens when a part genuinely weighs very little and nobody checks the field. A mesh disc is light, and a pack of six is still an object with a mass.

It matters less here than on most pages and it is worth naming because it removes the one cross check available. With no weight and no wire gauge, the difference between a screen that stays flat for a year and one that folds on the third plunge is entirely in the words: a reinforced center ring, a folded edge, a double layered outer edge that will not fray.

Cups Without a Diameter

MEET GREAT claims more press sizes than anything else in this pool, stating its six filters fit 1 to 8 cup coffee presses, and it publishes no diameter to support it. A 1 cup press and an 8 cup press do not share a beaker width, so a single disc cannot seal in both, and the listing offers nothing to check the claim against.

What it does publish is a detachable structure for quick rinsing, 304 stainless stated rust and corrosion resistant, and six filters described as a spare part for long term needs. As a bag of spare mesh for a press you already have a filter to measure, that is a reasonable purchase. As an answer to which press it fits, the listing does not attempt one.

Which One Fits Your Kitchen

The small press on the desk. Sivaphe states 2.6 inches for a 350 milliliter or 12 ounce press and publishes the only fit range here, an inner diameter of 2.09 to 2.56 inches. Three pieces including a spiral disk, with a package figure of 2.99 by 2.99 by 0.63 inches.

The owner of a named machine. Secura states 3.82 inches for a 34 ounce or 1 liter press and lists eight model numbers it replaces, which no other listing in this pool does. Four pieces, a package figure of 3.8 by 3.9 by 0.7 inches, and almost nothing else published.

The family jug. IBETTERN’s 4.5 inch screen is the only pick for a 50 ounce, 12 cup or 1500 milliliter press, in a four pack of 304 stainless with a stated 100 mesh screen, a folded edge and a reinforced center ring. Measure your original filter first, as the listing asks.

The press with a worn plunger. YMMIND supplies six mesh screens plus a spiral disc and a cross disc stated to connect to the runner rod, for a 34 ounce press. Read its diameter carefully, because the title says 3.6 inches, a bullet says 3.75 and the size field says 4 inch.

The drawer that needs spares. MEET GREAT supplies six 304 stainless filters stated compatible with most 1 to 8 cup presses, with a detachable structure for rinsing. It publishes no diameter, no mesh count and no package figure, so measure your own filter before you rely on the claim.

What We Could Not Verify

Everything above comes from the makers’ own listings. These are the things a daily coffee drinker needs and the published data does not supply.

  • Not one of these five publishes a weight, and two listings elsewhere in this pool had weight fields discarded as close to zero.
  • YMMIND publishes three diameters for one filter, at 3.6 inches in the title, 3.75 in a bullet and 4 inch in its size field.
  • MEET GREAT publishes no diameter at all while claiming to fit presses from 1 cup to 8.
  • Four of the five publish no mesh count, so how fine the screen is cannot be compared across the page.
  • No listing in this pool publishes a wire gauge or the height of the folded edge, which decide whether a screen keeps its shape.
  • IBETTERN’s package figure of 0.07 inches cannot hold four folded discs with reinforced center rings.

Frequently asked questions

How do I know which filter fits my press?+

Two of these five give you a way that does not involve guessing. Sivaphe publishes a fit range, stating its 12 ounce screen suits an inner diameter between 2.09 and 2.56 inches, so you measure once and know. Secura lists eight specific machine model numbers the mesh replaces. The other three publish a single diameter and ask you to measure your original filter, which works and puts the work on you.

Why do filters for the same press differ in size?+

Because a French press beaker is not a standardized part. For a 34 ounce jug this pool contains filters stated at 3.6 inches, 3.82 and 4, and every one of those listings describes itself as universal. A filter slightly too small lets grounds past the edge and one slightly too large will not seat. That is why the two listings here that publish a range or a model list are worth more than the six that publish 4 inches.

Which listing is most confusing about its own size?+

YMMIND's, and it is otherwise a good set. Its title says 6 pieces of 3.6 inch screens, one bullet says the parts suit a 34 ounce and 3.75 inch wide press, and its size field says 4 inch. Three figures for one disc, across a span of four tenths of an inch. What it does supply that most do not is a spiral disc and a cross disc, stated to connect to the runner rod.

Does anything here fit a bigger press?+

One pick. IBETTERN's 4.5 inch screen is stated for 50 ounce, 12 cup or 1500 milliliter presses, in a four pack of 304 stainless with a 100 mesh screen and a reinforced center ring. Everything else on this page and most of this pool is aimed at the 34 ounce, 8 cup, 1000 milliliter size. Sivaphe goes the other way with a 2.6 inch screen for a 350 milliliter press.

Is a mesh count worth looking for?+

It is the one number that describes filtration and four of these five leave it out. IBETTERN states 100 mesh and ties it to sediment free coffee. YMMIND says a higher density screen holding back 99 percent of used grounds, which is a percentage rather than a count. Six listings elsewhere in this pool state 100 mesh, so the figure is standard in the category and its absence is a choice.

Which listings were left out, and why?+

Two for being different objects. A YETI listing is a twist to lock lid for a 34 ounce Rambler press, sold as a lid only, with a height field reading 10 inches. A PRETYZOOM listing is a whole plunger assembly of a lid, a metal plate, a filter mesh, a cross tray and a push rod at 6.29 by 2.75 by 1.18 inches. Two more listings name the same fifteen press brands in identical wording.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.