How the Five Compare on the Numbers
A machine that lives on a shelf is judged by one figure, and these listings mostly refuse to name it. Sixteen listings publish three numbers each and exactly one of them says which is the length, which the width and which the height. Gasbye publishes 15.7 inches long, 7.8 inches wide and 4.7 inches high, with each letter attached.
The others leave it to be guessed. KAXJULE publishes 13.77 by 4.33 by 1.96 inches in its own words, so its smallest figure is under two inches. Bonsenkitchen publishes 15.28 by 5.71 by 3.03. XQDCZR publishes 394 by 200 by 106 millimeters. FoodSaver publishes no figure in words at all, and its fields read 5.59 by 17.91 by 10.24 inches.
What the table cannot tell you is which figure a shelf will actually meet, on four of the five. Three unlabeled numbers describe a box, not an orientation, and a machine that lies flat on a counter may be stored on its side or on its end. Two listings resolve it with a sentence rather than a figure, which turns out to be more useful than the figure would have been.
Only One Listing Says Which Figure Is the Height
Gasbye Labels All Three
Gasbye publishes its size as 15.7 inches long by 7.8 inches wide by 4.7 inches high, with the letters attached to each number. That single piece of formatting is worth more on a shelf question than any other figure on this page, because it is the only case where the clearance under a shelf can be checked against a published height rather than a guess.
It is also the heaviest machine here at 6.5 lb, and the only one with roll storage and a cutter built into the body. Those two facts travel together: a machine that carries its own bag roll is a machine with more inside it, and 4.7 inches is the price of not keeping a roll somewhere else.
XQDCZR Publishes Millimeters That Match Its Inches
XQDCZR publishes its size only as 394 by 200 by 106 millimeters, which is unusual in this pool and quietly useful. Converted, those figures land almost exactly on its own data fields of 7.87 by 15.51 by 4.21 inches, so the two sets confirm each other. That is the only cross-check available anywhere on this page.
What it does not do is label them. A 106 millimeter figure is almost certainly the height because it is the smallest of the three, and almost certainly is not the same as published. The listing spends its bullets on ten modes, a dual pump, 95 kPa suction and an inflate function, and never mentions storage at all.
Two Makers Tell You Where to Put It
A Cabinet, a Drawer, or Standing Up
KAXJULE publishes its own measurement, 13.77 by 4.33 by 1.96 inches, and then says what it is for: a compact portable design that takes up minimal counter space and is easy to store in a cabinet or a drawer. That pairing of a figure with a place is the clearest answer to this page’s question that any listing gives.
Bonsenkitchen does the same thing, publishing 15.28 by 5.71 by 3.03 inches and 2.7 lbs in the same sentence as easy drawer or cabinet storage. Both listings are telling you the machine is not meant to live out, which is a different product philosophy from the two machines here that publish roll storage and replacement gaskets.
What Standing It Up Does to the Numbers
FoodSaver publishes no size in words and makes the boldest storage claim: it stores vertical to save valuable countertop space. Its fields read 5.59 by 17.91 by 10.24 inches, and if the machine stands on its end then the figure a shelf has to clear is the largest of those three rather than the smallest.
That inverts the whole comparison. On a counter it is a low machine with a large footprint; upright it is a narrow machine needing close to a foot and a half of clearance. The listing never says which of its three figures becomes the height when it is stood up, so a buyer has to allow for the biggest one.
Where the Figures Disagree With Each Other
One Machine Publishes Two Weights
Bonsenkitchen publishes 2.7 lbs in the bullet where it recommends drawer or cabinet storage, and its weight field reads 3.78 lb. Both are printed above as published. A pound of difference on a machine chosen for being stowable is not a rounding error, and the listing offers nothing that explains it.
The bullet figure is the one tied to the storage claim, so it is the one a buyer is being asked to act on, and it is the lower of the two. Nothing else on this page has the same problem: Gasbye, KAXJULE and FoodSaver each publish one weight, and XQDCZR publishes none at all.
What the Roll Storage Adds
Two of these machines are built to stay out and two are built to be put away, and the internal roll storage is the dividing line. Gasbye publishes integrated roll storage with a built-in cutter so a bag can be cut to length in seconds, and it also names three replacement parts you can buy separately: a foam gasket, a drip tray and the cutter itself.
KAXJULE and Bonsenkitchen publish neither, and both arrive with pre-cut bags instead, five in one case and ten in the other. That is the cleanest way to read this pool for a shelf: a machine with a roll inside it is a machine that wants a permanent home, and the two smallest published profiles here belong to the two that do not have one.
Which One Fits Your Kitchen
The cook who wants the height stated, not guessed. Gasbye is the only listing here that labels its figures, publishing 15.7 inches long, 7.8 wide and 4.7 high, with 95 kPa suction, roll storage, a cutter and three named replacement parts, at 6.5 lb.
The cook stowing it in a drawer between projects. KAXJULE publishes 13.77 by 4.33 by 1.96 inches in its own words and names a cabinet or a drawer directly, at 1.43 lb with 85 kPa suction and five named modes.
The cook who wants a cabinet machine with a warranty. Bonsenkitchen publishes 15.28 by 5.71 by 3.03 inches, four named modes and three years of coverage, and states 30 bags in 15 minutes. Read its two weight figures carefully.
The cook with counter space but no shelf. FoodSaver states it stores vertical to save counter space, on fields of 5.59 by 17.91 by 10.24 inches. Standing up, a shelf needs to clear the largest of those, and the listing never says which one it becomes.
The cook who wants ten modes on a shelf. XQDCZR publishes 394 by 200 by 106 millimeters, which matches its inch fields almost exactly, with 95 kPa dual pump suction, ten modes and an inflate function. It says nothing about storage at all.
What We Could Not Verify
Everything above is the makers’ own published wording, and on a shelf question the data is missing the one label that would settle it.
- Only one of the sixteen listings on this fact sheet says which of its three figures is the height.
- FoodSaver states that it stores upright and never says which figure becomes the height when it does.
- Bonsenkitchen publishes 2.7 lbs in a bullet and 3.78 lb in its data field, with no explanation.
- No listing publishes a clearance figure for opening its lid, which is what a shelf above it has to allow.
- XQDCZR publishes no weight at all, so it cannot be compared with the other four on that figure.
- No listing says whether a machine may be stored on its side, which is the obvious way to get a 15 inch body into a cabinet.