Lush Food & Drink

Explainer

Do espresso machines have plastic?

Yes. Every espresso machine on this site's two guides has plastic in it, from the body panels to the water tank, the portafilter handle and the milk frother, and the makers describe some of those parts by material while leaving others unstated.

By the Lush Editorial Team·Researched & Compared

Yes, espresso machines contain plastic. On the machines this site compares, plastic shows up in the water tank, the portafilter handle, the milk frothing parts and often the outer housing, and several makers name plastic components directly in their published feature lists.

What the makers do not publish, in most cases, is a full materials breakdown. You can read which parts are stainless steel, which are dishwasher safe and which are described as plastic, but not a complete list of every polymer in the machine. The sections below go through what the picks in Best Espresso Machines for Home Baristas and Small Kitchens and Best Automatic Espresso Machines for One Touch Brewing actually state.

Where plastic sits on a manual machine

The Breville BES870XL Barista Express is listed with a brushed stainless steel finish, and its published features name several stainless steel parts: a 54mm stainless steel portafilter, stainless steel filter baskets and a stainless steel milk jug. The same list also covers a bean hopper and a 67 oz water tank, and the maker does not state what either is made from. A water tank on a home machine is normally a removable plastic vessel, but Breville does not publish that in the material list, so this site cannot state it as a published fact.

The De’Longhi Stilosa is described with a stainless steel boiler and an ergonomically designed portafilter with two filters for single or double espresso. De’Longhi does not publish the portafilter body material, the handle material or the housing material in its feature list. The machine is listed at 13.5 inches wide, 8.07 inches deep and 11.22 inches high, and weighs 9.48 pounds, which is light for an espresso machine and consistent with a compact housing, though the maker does not say what that housing is.

The CASABREWS CM5418 is described as having a stainless steel appearance, and its included components list a 34 oz removable water tank, a portafilter, a tamper with spoon and two brewing filters. The maker states the tank is removable and gives its capacity but does not name the material. The steam wand is described as a milk frothing wand without a stated material.

Plastic in automatic machines and milk systems

Automatic machines carry more plastic because the milk system is built in. The Philips 5500 Series uses the LatteGo milk system, which the maker describes as three parts with no internal tubes or hidden compartments, dishwasher safe or rinsable in 10 seconds. Philips does not state the material of those three parts in its published features, only the part count and the cleaning method. The machine is listed at 9.69 inches wide, 17.05 inches deep and 14.84 inches high.

The De’Longhi Magnifica Evo lists a LatteCrema system that textures milk and milk alternatives and can be stored in the fridge, plus removable and dishwasher safe parts for cleaning. De’Longhi does not publish which of those parts are plastic. The machine is listed at 9.45 inches wide, 17.32 inches deep and 14.17 inches high, and weighs 21.16 pounds.

The ICEVIVAL fully automatic machine states a detachable milk container and a 1.5L water tank with a 200g bean hopper. Those capacities are published in liters and grams by the maker, and this site reports them as published. The EUHOMY automatic machine states the same 1.5L water tank and 200g bean hopper figures and describes an integrated milk frothing system, again without naming the material of the container.

What the makers do call out as metal

Where a maker wants you to know a part is metal, it usually says so. Breville names stainless steel for the portafilter, the filter baskets and the milk jug. De’Longhi names a stainless steel boiler on the Stilosa. CASABREWS describes a stainless steel appearance and a 20 bar Italian pump with a 1350 W boiler. The AMZCHEF machine states an 8mm stainless steel steam wand and a 1350 W heating system. The CDKM electric moka pot states food grade 304 stainless steel construction.

That pattern is useful. A published feature list tends to name the metal parts because they are selling points, and to leave the plastic parts unnamed because they are ordinary. So an absence of a material callout is not evidence that a part is metal. It usually means the maker did not address it.

The AMZCHEF machine is listed at 10.82 inches wide, 12.5 inches deep and 13.38 inches high and weighs 13.89 pounds. It publishes 44 grind settings, a temperature range of 190 to 201 degrees Fahrenheit and a 60 oz water tank. None of those figures tell you the housing material, and AMZCHEF does not publish it.

Which plastic parts touch the coffee

The parts in the brew path are the ones people ask about. On the manual machines, the portafilter basket is stated as stainless steel by Breville, and De’Longhi states two filters for single or double espresso without a material. The water tank sits upstream of the brew path on every machine here, and no maker in either guide publishes the tank material.

On the automatic machines, coffee moves through an internal grinder and brew unit. De’Longhi, Philips, ICEVIVAL and EUHOMY all describe conical burr grinders or integrated grinders, and none of them publishes the material of the brew unit or the internal coffee path. The Philips machine states a QuickStart ready-to-brew time of 3 seconds and SilentBrew sound shielding, which are performance claims rather than material disclosures.

If a specific material question matters to you, the published feature list is the only place on these pages where an answer would appear, and for most parts it does not appear.

How to read a maker’s material claims

Treat a named material as covering exactly the part named. When Breville says 54mm stainless steel portafilter, that describes the portafilter, not the hopper, the tank or the housing. When CASABREWS says stainless steel appearance, that is a finish description, not a statement that the body is steel.

Dishwasher safe claims are also worth reading closely. Philips states the LatteGo parts are dishwasher safe, and De’Longhi states removable and dishwasher safe parts on the Magnifica Evo. Those claims tell you the parts survive a dishwasher cycle, not what they are made of.

The honest summary is that plastic is present across both guides, the makers name metal parts far more often than plastic ones, and no pick in either guide publishes a complete materials list. This site has not compared the machines beyond the figures and features the makers publish.

Common questions

Is the water tank on an espresso machine plastic?

The makers in this site's guides do not publish the tank material. Breville lists a 67 oz water tank, CASABREWS lists a 34 oz removable water tank, and AMZCHEF lists a 60 oz water tank, but none of them states what the tank is made from. Removable tanks on home machines are commonly plastic, but that is not a published specification here.

Are espresso machine portafilters metal or plastic?

Breville publishes a 54mm stainless steel portafilter for the Barista Express, so that part is stated as steel. De'Longhi lists a portafilter with two filters for the Stilosa without naming the material of the body or the handle. CASABREWS lists a portafilter in its included components without a material.

Do automatic espresso machines have more plastic than manual ones?

They have more built-in systems, including milk frothers and internal grinders, and the makers describe those systems without publishing their materials. Philips describes the LatteGo milk system as three parts with no internal tubes. De'Longhi describes a LatteCrema system that can be stored in the fridge. Neither publishes what those parts are made of.

Does any maker publish a full materials list?

No. Across both guides, the makers name individual metal parts such as stainless steel boilers, portafilters, filter baskets, steam wands and milk jugs, and they name dishwasher safe parts. None of them publishes a complete breakdown of every material in the machine, so a full list is not available from the published features.

Is the steam wand on these machines stainless steel?

AMZCHEF states an 8mm stainless steel steam wand on its grinder machine. Breville describes a steam wand for microfoam without a material. CASABREWS describes a milk frothing steam wand without a material. De'Longhi describes a manual milk frother on the Stilosa without a material. Only AMZCHEF publishes the wand material.

Does the CDKM moka pot contain plastic?

CDKM states food grade 304 stainless steel construction for the pot and describes an imported thermostat with anti-dry running protection and a safety valve. The maker does not publish the material of the handle, the button or the internal electrical parts, so this site cannot state whether plastic appears in those components.

Ready to compare actual models?

Our buying guides put five products side by side on the numbers their makers publish.

More questions about espresso machines