How the Five Compare on the Numbers
The five infusers here differ most in published basket size and weight. The Yoassi publishes a 5 inch width and a 5 inch depth with no height field at all, and states a 3 inch height in its own bullet. The Reinmoson publishes a 1.5 inch diameter and a 2.2 inch height. The Ohtomber publishes three identical 1.97 inch fields and states 2.9 by 2.2 inches instead. The OXO publishes a 7 inch height on a 1.6 inch body, and the HOUSE AGAIN a 2.6 inch width, a 3.8 inch depth and a 2.2 inch height.
Weight is the one figure all five publish. The HOUSE AGAIN is the lightest at 0.07 pounds, a figure printed against a pack of two that does not say whether it covers one infuser or both. The Reinmoson is 0.09 pounds and the OXO 0.13 pounds. The Yoassi and Ohtomber are 0.22 pounds each, the heaviest of the five. Mesh detail is stated in words rather than numbers by every one of them, so the table below shows where each maker stops.
The table does not tell you how any of these infusers behaves in a mug. Not one of the five publishes a micron rating for the mesh, an internal basket volume, a wire gauge or a maximum brew temperature. The stated mesh descriptions are marketing language rather than measurements, and the Ohtomber dimension fields are a placeholder its own words contradict. A buyer who needs a specific mesh rating should ask the maker directly before ordering.
Mesh Detail and What Each Maker States
Stated hole descriptions
The Reinmoson states its mesh has 50 percent more half sized holes than a traditional tea infuser ball. The HOUSE AGAIN states a micron sized perforation process that traps the smallest tea particles. The Yoassi states extra fine holes that keep rooibos, herbal and green tea in while letting water flow freely. The OXO states extra small etched holes. The Ohtomber states an extra fine mesh suited to delicate whites, chunky fruit teas and Japanese green teas with powdery bits. None of those is the same kind of statement, so they cannot be ranked against each other.
The practical difference is that a millimeter or micron figure would be checkable and a descriptive phrase is not. Not one of the five publishes a number for its mesh. The Reinmoson comes closest with a relative claim, 50 percent more holes than a traditional ball, which is a comparison against an unnamed product rather than a measurement. A buyer who wants to compare mesh across these brands will not find a common unit anywhere in their published text.
What mesh does not decide
Mesh size is not the only factor in how much sediment reaches the cup. The fit of the lid and the size of the basket opening also matter. The Reinmoson and HOUSE AGAIN both state threaded lids, which are described as sealing tightly. The Yoassi states a sturdy lid and no mechanism. The OXO uses a twisting body. The Ohtomber uses a lid with silicone that is stated to hold heat and double as a drip tray.
A finer mesh with a loose lid can still let particles escape at the seam. A coarser mesh with a tight threaded lid may keep more leaf inside the basket. The published features describe the lid design for each of the five, but none of them state a particle size that the lid is rated to contain.
Basket Size and Vessel Fit
Published dimensions
The Yoassi publishes a 5 inch width and a 5 inch depth, with a stated 3 inch height in its features. The HOUSE AGAIN publishes a 2.6 inch width, a 3.8 inch depth and a 2.2 inch height. The Ohtomber publishes a 1.97 inch cube. The Reinmoson publishes a 1.5 inch diameter and a 2.2 inch height. The OXO publishes a 1.6 inch width and depth with a 7 inch height.
Two of those figure sets have to be read with care. The Yoassi publishes no height field at all, so its 3 inch height comes from a bullet reading five inch width and three inch height, not from a specification field. The Ohtomber fields read 1.97 inches three times over, which is a placeholder, and its own words give 2.9 by 2.2 inches. A buyer who needs an exact outside dimension should treat both as the maker’s sentence rather than a measured figure.
Handles, chains and hooks
The Yoassi states two handles that rest on a cup edge. The Ohtomber states heatproof double handles with silicone nubs. The Reinmoson states a 4.3 inch chain with an S handle. The HOUSE AGAIN states a 4.7 inch chain with an S hook that catches on mugs, teapots, mason jars, kettles and bottles. The OXO and Ohtomber publish no chain length at all.
Chain length matters when the infuser must hang in a deep teapot or a tall mug. Only two of the five give a figure: the HOUSE AGAIN states 4.7 inches and the Reinmoson 4.3 inches, a difference of 0.4 inches. The OXO uses no chain at all, relying on a long stainless steel neck stated to fit most cups and mugs, and the Yoassi rests on two handles the maker says will not let it fall into a big mug.
Lid Design and Cleanup
How each lid closes
The Reinmoson and HOUSE AGAIN both state a threaded lid, described as screwing closed and holding leaf tightly, and the Reinmoson adds that a thread top is more secure than a traditional twist lid. The OXO uses a twisting body that is stated to make filling with a large amount of loose leaf tea easy. The Ohtomber uses a lid with silicone that is stated to hold in heat and serve as a drip tray.
The Yoassi states a sturdy lid that keeps steeping goodness from evaporating and keeps water warm. It does not state a threading or twisting mechanism. A buyer who has had a push on lid pop open during brewing may prefer a stated threaded or twisting design, since those are the closures the makers describe as secure.
Cleaning and accessories
Four of the five state a washing method. The Yoassi states it is easy to clean and dishwasher safe. The HOUSE AGAIN states easy to clean by hand or in the dishwasher without retaining odors. The Ohtomber states it is easy to clean, leaves no residue and is dishwasher safe. The Reinmoson states only that stainless is easier to clean than a screen infuser or a cloth bag. The OXO names no method at all.
A drip tray or saucer is a small accessory but it decides where the wet infuser goes after brewing. The HOUSE AGAIN includes one mini tray per infuser in its pack of two. The Reinmoson includes one saucer for its single infuser. The Ohtomber builds the tray into the lid, which doubles the lid as a heat cover. The Yoassi and OXO leave that step to whatever saucer you already own.
Which One Fits Your Kitchen
Single mug drinker. The Reinmoson publishes a 1.5 inch diameter and a 2.2 inch height, which suits one cup. Its 4.3 inch chain and saucer cover the basic routine. The threaded lid is stated to stay closed.
Two person household. The HOUSE AGAIN two pack gives two infusers and two mini drip trays with 4.7 inch chains, published together at 0.07 pounds, the lightest figure of the five. Its fields read 2.6 by 3.8 by 2.2 inches.
Wide mug or teapot user. The Yoassi publishes a 5 inch width and a 5 inch depth with a stated 3 inch height, against 1.5 inches across for the Reinmoson. Its two handles are stated to rest on a cup edge and not float.
Large leaf filler. The OXO Brew Twisting Ball publishes a 7 inch height and a twisting body that is stated to make filling with a large amount of loose leaf tea easy. It has no chain and relies on a long neck.
Heatproof handling. The Ohtomber states 2.9 by 2.2 inches with silicone tipped double handles and a lid that doubles as a drip tray. It is stated to protect fingers from hot tea and to fit differently sized mugs.
What We Could Not Verify
Several figures that would help a buyer compare these infusers are not published by any of the five makers, and two more are published in a form that cannot be used.
- The mesh hole size in microns or millimeters, which not one of the five states.
- The internal basket volume in fluid ounces or milliliters.
- The wire gauge or stainless steel thickness of the mesh.
- A maximum brew temperature or dishwasher temperature rating.
- The country of manufacture for any of the five infusers.
- The chain length for the OXO and Ohtomber, and whether the HOUSE AGAIN weight covers one infuser or two.