Lush Food & Drink

Explainer

Can You Use Wood Pellets in a Charcoal Grill?

Yes, but not as a straight fuel swap: wood pellets are meant to smolder in a controlled hopper, so in a charcoal grill they work best in a smoker tube or box alongside your charcoal.

By the Lush Editorial Team·Researched & Compared

Yes, you can use wood pellets in a charcoal grill, but the pellets are not a direct replacement for the charcoal. The makers of the pellet accessories on this site describe them as smoldering wood that adds smoke flavor, and one of them states plainly that it works in any charcoal grill.

The practical approach is to keep charcoal as the heat source and let a filled tube or box of pellets smolder alongside it. That gives you wood smoke without asking a charcoal bed to feed a fuel the grill was not built to meter.

What Wood Pellets Are Designed to Do

Wood pellets are compressed sawdust, and they are built to burn in a controlled draft. A pellet grill feeds them from a hopper into a fire pot at a rate the controller sets. The Z GRILLS 7002C uses a PID 3.0 controller with an LCD screen that auto-tunes fuel and airflow, and its hopper holds 28 lbs of pellets. The Traeger Pro 22 runs a Digital Pro Controller from 180 degrees Fahrenheit to 450 degrees Fahrenheit within plus or minus 15 degrees, and its hopper holds 18 lbs.

Those figures describe machines that decide how much fuel reaches the fire. A charcoal grill has no hopper and no controller, so the pellets sit in a pile and either starve for air or burn hot and fast. That is why the accessory route is the one the makers describe. The Best Pellet Grills and Smoke Tubes for Backyard Cooks guide compares the grills and the smoke tubes side by side.

None of the five picks in that guide is a bag of pellets, and none of the makers here publishes a burn rate, a pellet size or a recommended pellet depth for charcoal use. This site has not compared pellet brands for charcoal grills, so treat the pellet itself as an open choice and the delivery method as the thing that matters.

The Smoker Tube Route

The LIZZQ Premium Pellet Smoker Tube is the clearest answer to the question. The maker states that the accessory is designed to work in any grill, gas, electric or charcoal, and with any smoker. It is 12 inches long, 2.16 inches wide and 2 inches tall, and it weighs 0.5 lb. The maker states it can produce smoke for up to 5 hours of smoking.

The maker also states it can be used with a variety of wood pellets, naming cherry, hickory, mesquite, apple and pecan. The hexagon shape is described as staying in place rather than rolling, which matters on a round charcoal grate. You fill the tube, light one end and set it among the coals or off to the side.

Note the scope of what the maker publishes. The features describe smoke duration and pellet variety, but they do not state a fill quantity in cups or pounds, a lighting method in minutes, or a placement distance from the coals. Those are cooking decisions, not published specifications, so work them out on your own grill.

Smoker Boxes and Pipes

Two other picks take pellets or chips in a closed vessel. The Napoleon PRO Stainless Steel Smoker Pipe measures 12 inches by 1.75 inches by 1.75 inches and weighs 0.62 lb. The maker states you remove one end and fill it with wood chips or smoking pellets, and that it is intended to turn a gas barbecue into a smoker. Its published instructions place it on the sear plates above a burner, which is a gas grill layout, so on a charcoal grill you would be adapting the idea rather than following the maker’s steps.

The Weber Premium Universal Smoker Box is 9.8 inches long, 4.5 inches wide and 2 inches tall, and weighs 1.46 lb. The maker states it is stainless steel, that it fits most sizes of grills, and that you can add chips while it is in use. The published features mention chips, not pellets, so the maker does not state pellet use for this box. If you want a documented pellet accessory, the LIZZQ tube is the one whose maker names pellets explicitly.

All three accessories are small compared with a grill body. The tube and the pipe are both 12 inches long, and the box is 9.8 inches. On a charcoal grill that means they take up a corner of the grate rather than the whole cooking surface, which leaves room for the food.

Why Pellets Are a Poor Main Fuel in a Charcoal Grill

A charcoal grill is built around a bed of lump or briquette charcoal that holds heat and radiates it upward. Pellets are small and dense, and a pile of them restricts its own airflow. In a hopper system a fan and an auger keep the fire small and fed. Without that, a full chimney of pellets is likely to smolder, choke or flare depending on how the vents are set.

The grill makers in the guide solve this with electronics. The Z GRILLS unit uses PID 3.0 technology with an LCD screen for auto-tuning fuel and airflow, and the maker states this keeps temperature consistent despite external temperature variation. The Traeger unit holds within plus or minus 15 degrees across its range. Those are the conditions pellets are formulated for.

So the honest answer is that pellets belong in a charcoal grill as a flavor accessory, not as a substitute for charcoal. Keep the charcoal bed for heat and let a tube or box of pellets add the smoke. If you want a grill that meters pellets for you, that is a different purchase, and the guide covers five such machines and accessories.

A Practical Setup on a Charcoal Grill

Light your charcoal as you normally would and arrange it for two-zone cooking, with coals on one side and a clear area on the other. Fill the LIZZQ tube with pellets, light one end, and let it establish a small flame before you set it down. Place it among or just beside the coals so it keeps smoldering, and put the food over the clear zone for indirect heat.

The maker’s stated 5 hours of smoke is the number to plan around, though it describes the tube’s capability rather than a guarantee on your grill. The Napoleon pipe and the Weber box give you a closed vessel alternative if you prefer chips or a mix. The Weber box lets you add chips while it is in use, which the maker lists as a feature.

Vent control still governs everything. A charcoal grill with the lid down and the top vent partly open will hold smoke around the food. Wide open vents push heat and smoke through fast. The accessories add flavor; the vents and the charcoal set the cook.

Common questions

Do wood pellets need to be soaked before going in a charcoal grill?

None of the makers in the cited guide publishes a soaking instruction for their pellet accessories. The LIZZQ maker describes smoldering wood pellets and names cherry, hickory, mesquite, apple and pecan as suitable, without stating a soak step. Soaking is a common habit with chips, but the published features here do not call for it, so follow the accessory maker's own directions.

Can I just pour pellets onto the charcoal?

The makers here do not describe that method. Every pellet accessory in the guide is a vessel: the LIZZQ tube, the Napoleon pipe and the Weber box all contain the wood rather than scattering it. A loose pile of pellets on a charcoal bed has no published guidance behind it, and the grill makers in the guide all rely on a hopper and a controller to feed pellets at a set rate.

Will pellets work in a gas grill too?

Yes, according to two makers. The LIZZQ maker states the tube is designed to work in any grill, gas, electric or charcoal. The Napoleon maker states the smoker pipe is intended to turn a gas barbecue into a smoker, and its published steps place the filled pipe on the sear plates above a burner before you light the grill. The Weber box is listed as fitting most sizes of grills.

How long does a pellet tube smoke?

The LIZZQ maker states the tube can produce smoke for up to 5 hours of smoking. That figure describes the accessory's capability as published, not a result on any particular grill. The tube is 12 inches long, 2.16 inches wide and 2 inches tall, and it weighs 0.5 lb. The other accessories in the guide do not carry a published smoke duration.

What is the difference between a pellet grill and a charcoal grill with a smoke tube?

A pellet grill feeds pellets from a hopper under electronic control. The Z GRILLS 7002C has a 28 lb hopper and a PID 3.0 controller, and the Traeger Pro 22 has an 18 lb hopper and holds 180 to 450 degrees Fahrenheit within plus or minus 15 degrees. A charcoal grill with a smoke tube keeps charcoal as the heat source and uses pellets only for smoke flavor.

Which pellets should I put in the tube?

The LIZZQ maker names cherry, hickory, mesquite, apple and pecan as suitable woods, and states the tube can be used with a variety of wood pellets. The maker does not publish a pellet size, a fill weight or a recommended depth. Pick a flavor wood that suits the food, fill the tube as the maker directs, and light one end.

Ready to compare actual models?

Our buying guide puts five products side by side on the numbers their makers publish.

More questions about pellet grills and smoke tubes