Lush Food & Drink

Explainer

How to clean a waffle maker before first use

Before the first use, wipe a new waffle maker's plates with a damp cloth to remove dust and factory residue, never submerge the body in water, then season the plates with a little oil and run it once empty or with a throwaway waffle to burn off any manufacturing smell.

By the Lush Editorial Team·Researched & Compared

Cleaning a new waffle maker before its first use is quick and simple: wipe the plates with a damp cloth to lift off dust and any factory residue, dry them, then lightly season the non stick plates with a little oil and run the maker once, either empty or with a throwaway first waffle, to burn off any manufacturing smell. You never submerge the body in water, since it holds the heating elements and wiring. This small routine, which applies to any of the waffle makers in our best waffle makers guide, makes sure your first real waffle is clean, releases cleanly, and does not carry a chemical taste or odor.

Why clean it first

A brand new waffle maker arrives with the dust of packaging and faint traces of the oils and release agents used in manufacturing on its plates. None of this is harmful, but you do not want it in your first waffle, and the manufacturing residue is what causes the slight smell and smoke a new appliance often gives off when first heated. A quick clean and a first heat cycle remove the dust and burn off the residue, so your cooking starts fresh. It is the same reason a new frying pan or oven is wiped and heated before real use, and it takes only a few minutes.

Wipe the plates

Start with the maker unplugged and cool. Wipe the cooking plates with a damp cloth or a paper towel, getting into the ridges and pockets to lift any dust or residue, and use a little mild dish soap on the cloth if you like, then wipe again with a clean damp cloth to remove any soap. A soft brush or cloth reaches into the grid pattern. Do not use abrasive scrubbers, which scratch the non stick coating. Dry the plates with a cloth afterward. This removes the physical dust and surface residue before any heat is applied, which is the main cleaning step.

Never submerge the body

The crucial safety rule is never to immerse the waffle maker in water or hold it under a tap, because the body contains the heating elements and electrical parts, and water in them is a shock hazard and will ruin the appliance. Only the plates are cleaned, and only by wiping, unless your model has fully removable, dishwasher safe plates that detach from the body, in which case those plates can be washed separately as the manual allows. The base and anything electrical stays dry and is only ever wiped. Check your manual, but for most waffle makers with fixed plates, wiping is the only cleaning the body ever gets.

Season the plates

After wiping, many manufacturers suggest lightly seasoning the non stick plates before first use. Brush or wipe a thin film of a neutral cooking oil over the plates, just enough to coat them, which helps the first few waffles release cleanly and conditions the surface. Do not pour oil on; a light wipe is all that is needed. Some newer non stick coatings do not require seasoning, so check your manual, but a light oiling rarely does any harm and often helps. This step is quick and sets the plates up so your first waffle lifts out without sticking.

Run it once to burn off residue

Finally, heat the maker once before cooking anything you intend to eat. Plug it in, let it come up to temperature, and either run it empty for a few minutes or, better, cook one waffle and throw it away. This burns off the last of the manufacturing residue, which is responsible for the faint smell or wisp of smoke a new maker gives off, and it also lets you check the maker heats and the plates release. After this first throwaway run, the smell should be gone and the maker is ready to cook waffles you will actually eat. Opening a window helps clear any initial odor.

The short answer

So to clean a waffle maker before first use: unplug it, wipe the cool plates with a damp cloth to remove dust and residue, dry them, never submerge the body, lightly season the plates with a thin film of oil if the manual suggests it, then run the maker once, ideally cooking and discarding one waffle, to burn off the manufacturing smell. After that it is clean, seasoned, and ready. The whole routine takes only a few minutes and ensures your first proper waffle is fresh, releases cleanly, and carries no factory taste or odor.

Common questions

Do you need to clean a new waffle maker before using it?

Yes, a quick clean is worth it. A new maker carries packaging dust and faint traces of manufacturing oils on the plates, which you do not want in your first waffle and which cause the slight smell a new appliance gives off when heated. Wipe the plates with a damp cloth, dry them, and run the maker once to burn off the residue. It takes only a few minutes and starts your cooking fresh.

How do you clean a waffle maker before first use?

Unplug it and let it cool, then wipe the plates with a damp cloth or paper towel, getting into the ridges, with a little mild dish soap if you like, and wipe again with clean water. Dry the plates, lightly season them with a thin film of oil if the manual suggests, then heat the maker once, ideally cooking and discarding one waffle, to burn off the factory residue and smell. Never submerge the body.

Can you submerge a waffle maker in water to clean it?

No, never submerge the body, because it holds the heating elements and electrical parts, and water in them is a shock hazard and will ruin the appliance. Only the plates are cleaned, and only by wiping, unless your model has fully removable, dishwasher safe plates that detach from the body. The base and anything electrical must always stay dry and only ever be wiped with a damp cloth.

Should you season a new waffle maker?

Often yes. Many makers suggest wiping a thin film of neutral cooking oil over the non stick plates before first use, which helps the first few waffles release and conditions the surface. Use only a light coat, not a pour. Some newer non stick coatings do not need seasoning, so check your manual, but a light oiling rarely hurts and usually helps the first waffles lift out cleanly.

Why does my new waffle maker smell when first heated?

Because of the manufacturing residue and protective oils left on the plates and elements, which burn off the first time the maker gets hot, giving a faint smell and sometimes a wisp of smoke. It is normal and harmless and clears after the first heat cycle. Running the maker once empty or with a throwaway waffle before real cooking burns this off, and opening a window helps clear any initial odor.

Ready to compare actual models?

Our buying guide puts five products side by side on the numbers their makers publish.

More questions about waffle makers