Lush Food & Drink

Explainer

Can a waffle maker get wet?

The cooking plates of a waffle maker can get a little damp from cleaning, but the body must never be submerged or soaked, because it holds the heating elements and wiring; wipe it rather than washing it, unless it has fully removable, dishwasher safe plates.

By the Lush Editorial Team·Researched & Compared

A waffle maker’s cooking plates can get a little damp when you wipe them clean, but the body of the appliance must never be submerged in water or soaked, because it contains the heating elements and electrical wiring. Water reaching those parts is a shock hazard and will ruin the maker. So the plates tolerate a damp cloth, but the machine is cleaned by wiping, not washing, and it must be unplugged and cool first. The exception is a model with fully removable, dishwasher safe plates, which detach from the body and can be washed separately. The waffle makers in our best waffle makers guide are cleaned this way: wipe the body, never dunk it.

Why you cannot submerge it

A waffle maker is an electrical appliance with heating elements, wiring, a thermostat, and sometimes a control panel built into its body. Immersing it in water, or letting water run into it, lets water reach those electrical parts, where it can cause a short circuit, a shock, or permanent damage. This is the same reason you never submerge a toaster, iron, or electric kettle base. The plates get hot and do the cooking, but behind and around them is the electrical heart of the machine, and keeping water out of that is the fundamental safety rule for cleaning any waffle maker.

The plates can be wiped

Cleaning the plates with a damp cloth is fine and expected. Once the maker is unplugged and cool, you wipe the cooking plates with a damp cloth or paper towel to lift off batter and crumbs, getting into the ridges, and a little dampness on the plates does no harm because it dries off and is away from the electrics as long as water does not pour into the body. For stuck on batter, laying a damp cloth over the closed plates for a few minutes loosens it before wiping. What you avoid is drenching the plates so water runs down into the body, or holding the maker under a tap.

Removable, dishwasher safe plates

Some waffle makers have plates that detach completely from the body, and these change the picture. If your model has fully removable plates marked dishwasher safe or washable, you can take them off and wash them in the sink or dishwasher like ordinary dishes, getting them properly wet and clean, then dry and refit them. The body they came off, still holding the elements and wiring, is still only ever wiped, never submerged. Check your manual to confirm the plates are removable and washable, since not all are, and only those designed to detach should be taken off and washed.

If it gets wet by accident

If a waffle maker gets wet beyond a damp wipe, for example if water spills into it or it is accidentally soaked, do not plug it in or switch it on until it is completely dry. Unplug it if it is connected, then let it dry thoroughly in a dry place, giving the element area and any controls plenty of time to lose all moisture, which may take a day. Check that no water is trapped inside the body. Only use it again once you are confident everything is bone dry. Running a wet waffle maker risks a shock or damage, so patience here is a genuine safety matter.

Cleaning without getting it too wet

A few habits keep cleaning effective without soaking the machine. Wipe the plates while they are still warm, not hot, so batter comes off before it hardens, using a damp cloth rather than a running tap. For non stick plates, avoid abrasive scrubbers that scratch the coating, and soften stuck residue with a damp cloth rather than scraping. Wipe the outside of the body with a damp cloth too, keeping water away from the plug and controls. Dry everything before storing. With these habits a waffle maker stays clean and safe, and there is never a need to immerse the body in water.

The short answer

So a waffle maker’s plates can get a little wet from a damp cloth, but the body must never be submerged or soaked, because it holds the heating elements and wiring, and water there is a shock hazard that will ruin it. Clean the plates by wiping them, unplugged and cool, and wipe the body too, keeping water from the plug and controls, unless the model has fully removable, dishwasher safe plates you can wash separately. If it ever gets soaked, dry it completely before use. Wipe it, never dunk it, and the waffle maker stays safe.

Common questions

Can you get a waffle maker wet?

The plates can get a little damp from a cleaning cloth, but the body must never be submerged or soaked, because it holds the heating elements and wiring, and water there is a shock hazard that will ruin it. Clean the plates by wiping them with a damp cloth, unplugged and cool, and wipe the body too, keeping water from the plug and controls. Only fully removable, dishwasher safe plates can be washed separately.

Can you wash a waffle maker in the sink?

Not the whole appliance, since the body contains electrical parts and must never be submerged. You clean the plates by wiping them with a damp cloth while unplugged and cool. The exception is a model with fully removable plates marked dishwasher safe, which detach from the body and can be washed in the sink or dishwasher, then dried and refitted. The body they came off is still only ever wiped, never dunked.

Can you put waffle maker plates in water?

Only if they are fully removable and marked washable or dishwasher safe, in which case you detach them and wash them like dishes, then dry and refit them. Fixed plates that are part of the body cannot be put in water, since water would reach the electrics; those you clean only by wiping with a damp cloth. Check your manual to confirm whether your model's plates detach and are washable.

What happens if a waffle maker gets wet inside?

Water reaching the heating elements, wiring, or controls can cause a short circuit, a shock, or permanent damage. If a waffle maker gets wet beyond a damp wipe, unplug it and do not switch it on until it is completely dry, which may take a day in a dry place, checking that no water is trapped inside. Running a wet waffle maker is a genuine shock and damage risk, so let it dry fully first.

How do you clean a waffle maker safely?

Unplug it and let it cool, then wipe the plates with a damp cloth to lift batter and crumbs, loosening stuck bits by laying a damp cloth over the closed plates for a few minutes. Wipe the body too, keeping water from the plug and controls, and never submerge it. Avoid abrasive scrubbers on non stick plates. Fully removable, dishwasher safe plates can be washed separately, then dried and refitted.

Ready to compare actual models?

Our buying guide puts five products side by side on the numbers their makers publish.

More questions about waffle makers