Explainer
What should you look for in poultry shears?
Look for strong, sharp stainless steel blades that can cut through poultry bone and joints, a sturdy spring-loaded design, comfortable non-slip handles, a safety lock, and easy cleaning (ideally they come apart and are dishwasher safe). The blades must be tough enough for bone, since that is the point.
By the Lush Editorial Team·Researched & Compared
Poultry shears are heavy-duty kitchen scissors used to cut up poultry, through meat, joints and small bones, so when choosing them, look above all for strong, sharp stainless steel blades tough enough to cut through poultry bone and joints without bending or dulling, since that cutting power is the whole point. Beyond the blades, look for a sturdy, well-made spring-loaded design (the spring opens the blades for you between cuts, making repeated cutting easier), comfortable, non-slip handles that give a secure grip and leverage (important when cutting through bone), a safety lock to keep the sharp blades closed when stored, and easy cleaning, ideally shears that come apart (so you can clean between the blades after handling raw poultry) and are dishwasher safe. The blade strength and sharpness and the comfortable, powerful handles matter most, since the shears must cut through bone safely and comfortably, which is what poultry shears are for, with easy cleaning essential because they contact raw meat. Our Best Poultry Shears compares five of them.
Strong, sharp blades for bone
The most important thing to look for is strong, sharp blades capable of cutting through poultry, including joints and small bones. Poultry shears must do more than cut meat, they need to cut through chicken joints, cartilage, and bones (like a chicken’s backbone when spatchcocking, or cutting a bird into pieces), so the blades must be sharp enough to cut cleanly and, crucially, strong and tough enough not to bend, chip or dull when cutting bone. This cutting power through bone is the defining requirement, a poultry shear that cannot handle bone fails at its main job.
So look for blades made of good, hard stainless steel (which is strong, sharp, rust-resistant and food-safe), thick and robust enough for bone, and well sharpened. Some poultry shears have a serrated section or a notch/groove near the pivot designed to grip and cut through bones, which helps with tougher cuts. Stainless steel is standard for the blades because it combines the needed strength and sharpness with rust resistance and hygiene. So prioritize blades that are both sharp and tough enough to cut through poultry bone and joints cleanly, as this capability is exactly what distinguishes poultry shears from ordinary scissors and is the first and most important thing to look for.
Sturdy spring-loaded design and strong build
Look for a sturdy, heavy-duty overall build with a spring-loaded mechanism, because cutting through poultry and bone demands strength and makes repeated cutting tiring, which these features address. A strong, well-made construction (solid stainless steel, a robust pivot/screw joining the blades) ensures the shears withstand the force of cutting bone without flexing, loosening or breaking, so look for shears that feel substantial and well built rather than flimsy.
A spring-loaded design is very useful: a spring between the handles pushes the blades open again after each cut, so you do not have to manually re-open them, which makes cutting through a whole chicken or repeated cuts much easier and less tiring on your hand. This is a common and worthwhile feature in poultry shears. The pivot should be strong and ideally allow the shears to come apart for cleaning (see below). So a sturdy, heavy-duty build that handles the force of bone-cutting, plus a spring-loaded action for easier repeated cutting, are important things to look for, since they make the shears both durable and comfortable to use for the demanding job of cutting up poultry, complementing the essential strong, sharp blades.
Comfortable, safe handles
Look at the handles for comfort, grip and safety, because cutting through bone takes force and you want to do it securely and without hand strain. Comfortable handles, ergonomically shaped and ideally with a soft or non-slip grip, let you apply the needed pressure comfortably and give good leverage, which matters when cutting tough joints and bone, and a secure, non-slip grip (important as hands can get greasy handling poultry) keeps control and safety. Large enough handle openings to use with some force, and a design that fits your hand, help.
A safety lock is an important feature to look for: a mechanism that locks the blades closed when not in use keeps the sharp shears safe in a drawer and prevents accidental opening, which matters for such sharp, heavy-duty blades. Good leverage in the handle design also lets you cut bone with less effort. So comfortable, non-slip, well-leveraged handles plus a safety lock make poultry shears safe and comfortable to use and store, which is important given the force involved and the sharp blades, so these are key things to look for alongside the blades and build. Handles that are uncomfortable or slippery, or a lack of a lock, detract from otherwise good shears.
Easy cleaning and choosing
Easy cleaning is essential, because poultry shears cut raw poultry, so they must be cleaned thoroughly for hygiene, and look especially for shears that come apart (the blades separate at the pivot) so you can clean between and around the blades and the pivot where raw-meat residue hides, which ordinary fixed scissors make hard. Shears that separate for cleaning, and are dishwasher safe (many stainless ones are, though hand washing the sharp blades carefully is also fine), make proper hygienic cleaning much easier, so this is an important practical feature given the raw-meat contact.
Pulling it together, look for poultry shears with strong, sharp stainless steel blades that cut through poultry bone and joints, a sturdy heavy-duty build with a spring-loaded action for easier cutting, comfortable non-slip handles with good leverage and a safety lock, and easy, thorough cleaning (ideally take-apart blades, dishwasher safe). The blade strength and sharpness and the comfortable, powerful handles matter most, since the shears must cut through bone safely and comfortably, with easy cleaning essential for hygiene. Get those right and the shears will cut up poultry easily, safely and hygienically, so focus on the blades, the build and spring, the handles and lock, and the cleaning when choosing. So the key is tough, sharp blades plus a sturdy, comfortable, hygienic design.
The short answer
When choosing poultry shears, look above all for strong, sharp stainless steel blades tough enough to cut through poultry bone and joints, not just meat, without bending, chipping or dulling, since that cutting power through bone is the whole point and what distinguishes them from ordinary scissors (a serrated section or bone notch near the pivot helps with tough cuts). Then look for a sturdy, heavy-duty build with a robust pivot that withstands the force of bone-cutting, and a spring-loaded design, where a spring reopens the blades after each cut, which makes cutting up a whole chicken much easier and less tiring. Look for comfortable, ergonomically shaped, non-slip handles that give a secure grip (hands get greasy with poultry) and good leverage for cutting bone with less effort, plus a safety lock to keep the sharp blades closed when stored. And look for easy, thorough cleaning, ideally shears that come apart at the pivot so you can clean between the blades after handling raw poultry, and that are dishwasher safe. The blade strength and sharpness and the comfortable, powerful handles matter most, since the shears must cut through bone safely and comfortably, with easy cleaning essential because they contact raw meat.
Common questions
What should you look for in poultry shears?
Above all strong, sharp stainless steel blades tough enough to cut through poultry bone and joints without bending or dulling, since that is the point. Also look for a sturdy heavy-duty build with a spring-loaded action (the spring reopens the blades, easing repeated cutting), comfortable non-slip handles with good leverage, a safety lock to store them closed, and easy cleaning, ideally take-apart blades that are dishwasher safe. The blade strength and the comfortable, powerful handles matter most, with easy cleaning essential for hygiene.
Why do poultry shears need strong blades?
Because they must cut through more than meat, poultry joints, cartilage and small bones, such as a chicken's backbone when spatchcocking or cutting a bird into pieces, so the blades have to be sharp enough to cut cleanly and strong and tough enough not to bend, chip or dull on bone. This cutting power through bone is the defining requirement of poultry shears and what sets them apart from ordinary scissors, so blades that cannot handle bone fail at the main job, making blade strength the first thing to look for.
Why is a spring-loaded design good in poultry shears?
Because cutting through a whole chicken or repeated joints and bone is tiring, and a spring between the handles pushes the blades open again after each cut, so you do not have to manually re-open them every time. This makes repeated cutting much easier and less straining on your hand, which is valuable given the force poultry cutting takes. So a spring-loaded action is a common, worthwhile feature to look for, making the demanding job of cutting up poultry more comfortable and efficient, alongside a sturdy build that withstands the force.
Why is easy cleaning important for poultry shears?
Because they cut raw poultry, so they must be cleaned thoroughly for hygiene, and raw-meat residue can hide between and around the blades and the pivot. Look especially for shears that come apart (the blades separate at the pivot) so you can clean every surface, which fixed scissors make hard, and that are dishwasher safe (many stainless ones are), making proper hygienic cleaning much easier. Given the raw-meat contact, easy, thorough cleaning is an essential feature, not just a convenience, when choosing poultry shears.
Do poultry shears need a safety lock?
A safety lock is an important feature to look for, because poultry shears have very sharp, heavy-duty blades, and a lock that keeps them closed when not in use makes them safe to store in a drawer and prevents accidental opening. Along with comfortable, non-slip handles that give a secure grip (hands get greasy handling poultry) and good leverage for cutting bone, the lock contributes to safe use and storage. So a safety lock, while not the cutting feature itself, is a sensible and worthwhile thing to have on poultry shears.