Explainer
How do touchless kitchen faucets work?
A touchless kitchen faucet uses a motion sensor to detect your hand near the spout, then an electronic valve (solenoid) opens to start the water and closes to stop it when you move away, so you turn the water on and off without touching the tap, powered by batteries or mains.
By the Lush Editorial Team·Researched & Compared
A touchless kitchen faucet works by using a sensor to detect your hand (or an object) near the spout and then automatically turning the water on and off via an electronic valve, so you do not have to touch the tap. It has a motion/proximity sensor (usually infrared) near the base or spout that detects when you put your hands or a dish under or near it, and when it senses you, the faucet’s electronics open a solenoid valve (an electrically controlled valve) to start the water flowing, and when you move away (or wave again, depending on the design), the sensor no longer detects you and the solenoid valve closes to stop the water. So you wave or place your hands under the tap to start the water and remove them to stop it, hands-free. The electronics and valve are powered by batteries or a mains adapter. Many touchless faucets also have a manual handle/lever as well (for setting temperature and as a backup), and the touchless function controls the on/off. So a touchless kitchen faucet works by sensing your presence and electronically opening and closing the water, giving hands-free operation. Our Best Touchless Kitchen Faucets compares five of them.
The sensor detects your hands
The first part of how a touchless faucet works is the sensor that detects you. Touchless kitchen faucets have a motion or proximity sensor, typically an infrared (IR) sensor, positioned near the base or the end of the spout, that detects the presence of your hands, a dish, or an object within its range below or near the spout. The sensor emits and detects infrared, so when something (your hands) comes into its detection zone, it senses the reflection/interruption and registers that you want the water on, and when you move away, it no longer detects anything and registers that the water should stop.
So the sensor is the faucet’s way of knowing when to turn the water on and off, based on detecting your hands near the spout, no touching required. This is the “touchless” part: instead of you turning a handle, the sensor detects your presence and triggers the water. Understanding that an infrared sensor detects your hands in its zone, and signals the electronics to start or stop the water, is the key to how the faucet knows when to run. The sensor’s detection of you (and of you leaving) is what drives the on/off, which the electronics and valve then carry out, covered next. So the motion sensor detecting your hands is the trigger at the heart of a touchless faucet’s hands-free operation.
The electronic valve turns the water on and off
When the sensor detects your hands, the faucet turns the water on and off using an electronically controlled valve called a solenoid valve. A solenoid valve is a valve operated by an electromagnet: when the faucet’s electronics send it a signal (because the sensor detected your hands), the solenoid energizes and opens the valve, letting the water flow out of the spout, and when the sensor no longer detects you (you moved away), the electronics signal the solenoid to de-energize and close the valve, stopping the water. So the solenoid valve is what physically starts and stops the water flow, controlled electronically based on the sensor.
So the sequence is: the sensor detects your hands, the control electronics open the solenoid valve to start the water, and when you move away the sensor’s loss of detection makes the electronics close the solenoid valve to stop the water, all automatically and without you touching the tap. The solenoid valve is the key mechanism that converts the sensor’s detection into actual water on/off. (The water pressure from your supply pushes the water out when the valve opens; the solenoid just opens and closes the path.) So the electronic solenoid valve, triggered by the sensor via the electronics, is how a touchless faucet actually controls the water flow hands-free. So the sensor senses, and the solenoid valve acts, together giving the touchless on/off, which is the core of how these faucets work.
Power, and the manual handle and temperature
A touchless faucet needs power to run its sensor, electronics and solenoid valve, so it is powered either by batteries (a battery pack, often in the cabinet under the sink, which you replace periodically) or by a mains adapter (plugged into a power socket). This power runs the sensing and valve operation. So unlike a plain manual faucet, a touchless one needs this power source, and if the batteries die (or power is lost), the touchless function stops, though many faucets still work via their manual handle (below) in that case.
Most touchless kitchen faucets also have a manual handle or lever, which serves two purposes: you set the water temperature (and often the flow) with the handle (the touchless sensor controls on/off, but the handle sets how hot and how strong the water is, since the sensor cannot know what temperature you want), and the handle acts as a manual backup to turn the water on/off the normal way (useful if the batteries die or you prefer manual). So you typically set the temperature with the handle once, and then use the touchless sensor to turn the (pre-set-temperature) water on and off hands-free. So the faucet combines the touchless sensor/valve (for hands-free on/off) with a manual handle (for temperature and as backup), powered by batteries or mains. So power and the manual handle are part of how a touchless faucet works in practice, enabling the hands-free operation while still letting you control temperature and have a backup.
Using one and why it is useful
In use, a touchless kitchen faucet works like this: you set the desired water temperature (and flow) with the manual handle, then to run the water you simply place or wave your hands (or a dish) under or near the spout, the sensor detects you and the solenoid valve opens to start the water, and when you move your hands away, the sensor detects the absence and the valve closes to stop the water, all without touching the tap. Some faucets also respond to a wave gesture to toggle on/off. You can also use the manual handle directly if you prefer or if the power fails.
It is useful because the hands-free operation is convenient and hygienic: you can turn the water on and off without touching the tap, which is handy when your hands are dirty, greasy or full (so you do not transfer mess to the handle, or fumble with it), and it can save water (the water runs only when your hands are there). So a touchless kitchen faucet works by sensing your hands and electronically opening and closing the water via a solenoid valve, giving hands-free, hygienic, convenient operation, with a manual handle for temperature and backup, powered by batteries or mains. That sense-and-electronically-control-the-water mechanism is exactly how touchless faucets work and why they are valued for hands-free convenience and hygiene in the kitchen.
The short answer
A touchless kitchen faucet works by using a sensor to detect your hands near the spout and then automatically turning the water on and off via an electronic valve, so you do not have to touch the tap. A motion/proximity sensor (usually infrared) near the base or spout detects when your hands, a dish or an object come into its range, and when it senses you, the faucet’s electronics open a solenoid valve (an electrically controlled valve) to start the water flowing; when you move away, the sensor no longer detects you and the electronics close the solenoid valve to stop the water. So you place or wave your hands under the tap to start the water and remove them to stop it, hands-free, with the solenoid valve physically starting and stopping the flow based on the sensor. The sensor, electronics and valve are powered by batteries (a pack you replace periodically) or a mains adapter. Most touchless faucets also have a manual handle, which you use to set the water temperature and flow (the sensor only controls on/off) and as a backup to work the faucet manually if the batteries die. So in use, you set the temperature with the handle, then wave or place your hands under the spout to turn the (pre-set) water on and off touchlessly. This gives hands-free, hygienic, water-saving operation. So a touchless faucet works by sensing your presence and electronically opening and closing the water via a solenoid valve.
Common questions
How do touchless kitchen faucets work?
They use a sensor (usually infrared) near the spout to detect your hands, then an electronic solenoid valve opens to start the water and closes to stop it when you move away, so you turn the water on and off without touching the tap. The sensor detects your presence, the electronics open and close the solenoid valve accordingly, and it is powered by batteries or mains. Most also have a manual handle to set the temperature and as a backup. So it senses your hands and electronically controls the water, hands-free.
How does a touchless faucet sensor work?
It is a motion or proximity sensor, typically infrared, near the base or end of the spout that detects the presence of your hands, a dish or an object in its range below or near the spout. The sensor emits and detects infrared, so when your hands come into its zone it senses the reflection and registers that the water should turn on, and when you move away it no longer detects anything and registers that the water should stop. So the sensor detecting your hands (and their absence) is the trigger that tells the faucet when to run the water.
What turns the water on and off in a touchless faucet?
An electronically controlled valve called a solenoid valve, operated by an electromagnet. When the sensor detects your hands, the faucet's electronics energize the solenoid to open the valve and let the water flow, and when the sensor no longer detects you, the electronics de-energize the solenoid to close the valve and stop the water. So the solenoid valve physically starts and stops the flow, controlled electronically based on the sensor, which is how the faucet turns the water on and off hands-free (your supply pressure pushes the water out when the valve opens).
How is a touchless faucet powered?
By batteries or mains: it needs power to run its sensor, electronics and solenoid valve, so it uses either a battery pack (often in the cabinet under the sink, which you replace periodically) or a mains adapter plugged into a socket. This power runs the sensing and valve operation. If the batteries die or power is lost, the touchless function stops, but many touchless faucets still work via their manual handle in that case. So a touchless faucet, unlike a plain manual one, needs a battery or mains power source for its electronics.
Do touchless faucets still have a handle for temperature?
Yes, most touchless kitchen faucets also have a manual handle or lever, which you use to set the water temperature and flow, since the touchless sensor only controls on/off and cannot know what temperature you want, and which also works as a manual backup to turn the water on and off the normal way if the batteries die or you prefer. So you typically set the temperature once with the handle, then use the touchless sensor to turn the pre-set-temperature water on and off hands-free, with the handle available for temperature and as backup.
Ready to compare actual models?
Our buying guide puts five products side by side on the numbers their makers publish.