Lush Food & Drink

Buying Guide ·Baking

Best Cake Turntables for Washing Between Every Cake

The deciding specification is what each maker says about cleaning, because one of these five states plainly that it must not be put in water.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

I compared cleaning instructions, bearing description, braking, guide lines, published plate size, height and weight across five cake turntables, using each maker's own listing text.

Our shortlist

Five products, one set of published numbers.
  1. Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St...
    Best for centering a cake by eye

    Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St...

    The only plate here with guiding lines printed on it, 12 in of aluminum alloy on hidden stainless steel ball bearings, with a non slip rubber surface, 5.05 lb and a 3.7 in field height.

    • RICCLE
    • 12"
    • 5.05 lb
  2. Ateco Revolving Cake Decorating Stand
    Best for a maker that publishes its limits

    Ateco Revolving Cake Decorating Stand

    The #615, an aluminum base and plate on stainless steel ball bearings with a silicone cap underneath, 12 in across at 4.8 lb, and the only cleaning instruction on this page.

    • Ateco
    • #615 12" Round, Aluminum Base
    • 4.8 lb
  3. Cake Turntable
    Best for a plate that can be stopped

    Cake Turntable

    304 stainless steel turning clockwise and counterclockwise and fixable in place when it should not move, on a non skid rubberized bottom, published at 7.78 lb with no dimensions.

    • TOTITOM
    • 11.8"
    • 7.78 lb
  4. Kootek 12" Silver Aluminum Alloy Cake Turntable
    Best for plain everyday decorating

    Kootek 12" Silver Aluminum Alloy Cake Turntable

    Twelve inches of aluminum alloy on built in hidden ball bearings, a non slip surface with rubber feet, 5.2 lb and 3.77 in high in the fields. Tips and spatulas are not included.

    • Kootek
    • 12 Inch
    • 5.2 lb
  5. Cake Stand Rotating 12"
    Best for a listing whose size figures agree

    Cake Stand Rotating 12"

    A 12.2 in plate on a 7 in base standing 5.3 in high, the same three figures in the fields and in the maker's own line, with a stainless steel bearing and rubber feet.

    • himaly
    • 12.2"
    • 2 lb

Side by side

Blank means the maker does not publish it.
ModelBrandSize (capacity)WeightBest for
Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St... RICCLE 12" 5.05 lb Best for centering a cake by eye
Ateco Revolving Cake Decorating Stand Ateco #615 12" Round, Aluminum Base 4.8 lb Best for a maker that publishes its limits
Cake Turntable TOTITOM 11.8" 7.78 lb Best for a plate that can be stopped
Kootek 12" Silver Aluminum Alloy Cake Turntable Kootek 12 Inch 5.2 lb Best for plain everyday decorating
Cake Stand Rotating 12" himaly 12.2" 2 lb Best for a listing whose size figures agree

Each pick in detail

What the listing says for it, and against it.
1 Best for centering a cake by eye

Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St...

The only plate here with guiding lines printed on it, 12 in of aluminum alloy on hidden stainless steel ball bearings, with a non slip rubber surface, 5.05 lb and a 3.7 in field height.

  • For it
  • Guiding lines printed on the plate, the only positioning aid on this page
  • Hidden stainless steel ball bearings named rather than implied
  • A non slip rubber surface on the plate itself, not only feet underneath
  • Aluminum alloy described as professional grade for the whole body
  • Against it
  • Calls itself easy to clean without saying whether it can go in water
  • Publishes no height in words, only a 3.7 in field
  • Its width field reads 7.0 in, which is the base rather than the 12 in plate
2 Best for a maker that publishes its limits

Ateco Revolving Cake Decorating Stand

The #615, an aluminum base and plate on stainless steel ball bearings with a silicone cap underneath, 12 in across at 4.8 lb, and the only cleaning instruction on this page.

  • For it
  • The only one of these five that publishes a cleaning limit, and states it plainly
  • Stainless steel ball bearings in an aluminum base and plate
  • A silicone cap under the base to stop it sliding on a counter
  • Publishes a diameter and a height in its own sentence rather than only in fields
  • Against it
  • It cannot be submerged, which for everyday buttercream is a real constraint
  • Publishes 4 in high in words and 5 in its fields
  • No braking or locking of the plate
3 Best for a plate that can be stopped

Cake Turntable

304 stainless steel turning clockwise and counterclockwise and fixable in place when it should not move, on a non skid rubberized bottom, published at 7.78 lb with no dimensions.

  • For it
  • The only pick that can be fixed in place rather than always turning
  • Rotates clockwise and counterclockwise, stated explicitly
  • 304 stainless steel named for the whole assembly
  • A non skid rubberized bottom for stability on a counter
  • Against it
  • Publishes no dimensions at all, in fields or in words
  • 7.78 lb, the heaviest published figure among these five
  • Names no bearing, on a tool whose whole job is turning

Who should skip this: Skip this if weight matters: at 7.78 lb it is the heaviest of the five published weights.

4 Best for plain everyday decorating

Kootek 12" Silver Aluminum Alloy Cake Turntable

Twelve inches of aluminum alloy on built in hidden ball bearings, a non slip surface with rubber feet, 5.2 lb and 3.77 in high in the fields. Tips and spatulas are not included.

  • For it
  • Built in hidden ball bearings for the rotation
  • A non slip surface and rubber feet both described
  • Aluminum alloy for strength across the whole plate
  • Publishes 12 by 12 by 3.77 in and 5.2 lb, a complete set of figures
  • Against it
  • Does not name the metal in its bearings, unlike three other picks
  • Calls itself easy to clean with no method and no limit
  • No guide lines, no brake and no rotation direction published
5 Best for a listing whose size figures agree

Cake Stand Rotating 12"

A 12.2 in plate on a 7 in base standing 5.3 in high, the same three figures in the fields and in the maker's own line, with a stainless steel bearing and rubber feet.

  • For it
  • 12.2 in across, 7 in at the base and 5.3 in high, published identically in fields and text
  • A stainless steel bearing described as durable and flexible
  • 360 degree rotation stated
  • Non slip surface and rubber feet both named
  • Against it
  • Publishes 2 lb in its weight field and N.W 2000 g in its own bullet
  • Names heavy aluminum alloy and premium stainless steel for the same stand
  • Gives no cleaning method or limit beyond the material argument

Our verdict

Ateco is the only pick that publishes a cleaning limit, wipe with a damp cloth and do not submerge, on an aluminum #615 with steel ball bearings at 4.8 lb. himaly and TOTITOM both argue their steel wipes clean. RICCLE is the only plate with guiding lines printed on it. TOTITOM is the only one that can be fixed in place, at 7.78 lb with no published dimensions.

“Four say easy to clean. One says where the limit is.”

Lush Editorial Team

What separates these five

Cleaning instruction Ateco says wipe with a damp cloth and do not submerge. The other four say easy to clean and stop there.
Bearing named Ateco, RICCLE and himaly name stainless steel balls. Kootek names hidden bearings. TOTITOM names none.
Stopping the plate TOTITOM is the only pick that publishes a way to fix the plate in place.
Guide lines RICCLE prints guiding lines on the plate. No other pick here publishes a positioning aid.
Figures that disagree himaly publishes 2 lb and 2000 g. Ateco publishes 4 in and 5 in. TOTITOM publishes 12 in and 11.8.

How we chose

Priorities, not a computed score. The inputs are published specifications, so we rank by what matters most and say how much.

  1. 30% What the maker says about cleaningA turntable used weekly is covered in buttercream every time, and only one of these five tells you whether it can go near a sink.
  2. 25% How the plate turns, and whether it stopsFour name a bearing and one names a brake, and on an everyday routine the lift on and the lift off are when a spinning plate is a problem.
  3. 20% Whether the figures can be trustedThree of these five publish two different numbers for the same property, on weight, on height and on plate diameter.
  4. 15% Grip on the counterAll five describe a non slip part and they are different parts, a silicone cap, a rubber plate surface, rubber feet, a rubberized bottom.
  5. 10% What the plate is made ofAluminum alloy on three, 304 stainless on one, and both at once on the listing that also publishes two weights.

How the Five Compare on the Numbers

Sixteen listings sit on the fact sheet for this pool, and the five here are the ones with enough published text to compare. Fat Daddio’s publishes a single line of feature text and nothing else, so there is no cleaning claim, no bearing description and no material to place. Winco publishes a stainless steel display stand with easy assembly and no rotation claim of any kind, and hvominxs publishes a turntable inside a kit whose figures describe the icing smoother rather than the plate.

What decides a turntable used several times a week is not the plate. It is what happens after the cake comes off, and these five answer that very differently. One tells you outright not to put it in water. Two argue that stainless steel is the reason theirs wipes clean. One publishes guide lines printed on the surface, and one publishes a way to stop the plate turning.

Specification Ateco RICCLE Kootek himaly TOTITOM
What the maker says about cleaning Wipe with a damp cloth, do not submerge in water Easy to clean, no method given Easy to clean, no method given Easy to clean because both parts are steel Easy to clean because both parts are steel
Can it go in water No, stated plainly not published not published not published not published
Bearing described Stainless steel ball bearings Hidden stainless steel ball bearings Built in hidden ball bearings Stainless steel bearing, called flexible not published
Stops turning on demand not published not published not published not published Yes, fixed in place when wanted
Turns both ways not published 360 degrees stated not published 360 degrees stated Clockwise and counterclockwise
Guide lines on the plate not published Yes, guiding lines on the surface not published not published not published
Non slip part described A silicone cap on the base A non slip rubber surface A non slip surface and rubber feet A non slip surface and rubber feet A non skid rubberized bottom
Plate size published 12 in diameter 12 in 12 in 12.2 in 12 in in words, 11.8 in the size field
Height in the maker’s own words 4 in not published not published 5.3 in not published
Height in the listing’s fields 5 in 3.7 in 3.77 in 5.3 in not published
Published weight 4.8 lb 5.05 lb 5.2 lb 2 lb, against 2000 g in its own text 7.78 lb
Material stated Aluminum base and turntable Aluminum alloy Aluminum alloy Heavy aluminum alloy, and stainless steel 304 stainless steel

The table cannot tell you how a bearing ages, which is the property that decides whether a turntable is still worth using in a year. Four of the five name the bearing and none publishes a load rating, a service life or anything about whether it can be re greased. It also cannot reconcile himaly’s two materials or its two weights, and it cannot tell you why the one pick with a brake is the one pick that never mentions a bearing.

What Happens After the Cake Comes Off

The One That Says Do Not Submerge It

Ateco publishes the clearest cleaning instruction of these five and it is a restriction: wipe with a damp cloth, do not submerge in water. On a turntable used for everyday prep that is the single most consequential line on any of these five listings, because buttercream gets under the plate and around the base, and a tool that cannot go in the sink has to be cleaned around instead.

It is also the most honest. An aluminum base with steel ball bearings inside it is exactly the construction you would not want to flood, and Ateco is the only maker here that says so. The others describe themselves as easy to clean and leave the buyer to guess whether that includes a sink, a dishwasher, or a cloth.

Two Listings Argue From the Material

himaly and TOTITOM both make the same case in nearly the same words: both the plate and the stand are stainless steel, so they are easy to clean no matter how much cream is left on the surface. TOTITOM names 304 stainless throughout and himaly names stainless steel for the plate and the stand while also describing heavy aluminum alloy in its second bullet.

Neither of them says what happens if the assembly goes under a tap, which is the same gap Ateco fills with a warning. RICCLE and Kootek simply call themselves easy to clean, RICCLE adding that decorating is a breeze and Kootek noting that the plate suits decorating tips and icing spatulas, which are not included. Between the five, one instruction and four adjectives.

Turning, Stopping, and Guiding the Hand

Four Bearings and One Brake

Ateco, RICCLE, Kootek and himaly all name a bearing. Ateco and RICCLE specify stainless steel balls, RICCLE calling them hidden, Kootek calling its own hidden without naming the metal, himaly naming stainless steel and describing the bearing as flexible. TOTITOM names no bearing at all and instead publishes the one thing none of the others do, a plate that can be fixed in place when it is not wanted to spin.

For everyday prep that trade is real. A brake matters when a cake is being lifted on or off, or when a side is being scraped and the plate should not move. A named bearing matters every other minute. What nobody publishes is how much either arrangement will take, since none of the five gives a weight capacity for the plate.

The Only Plate With Lines On It

RICCLE publishes guiding lines on the surface of its 12 in plate, which is the only positioning aid anywhere on this page. Centering a cake by eye is the first thing that goes wrong in an everyday routine, and it is the sort of detail that never appears in a specification table because it is printing rather than engineering.

Everything else about RICCLE is close to Kootek: aluminum alloy, a non slip rubber surface, hidden steel bearings, 5.05 lb against Kootek’s 5.2, and a field height of 3.7 in against 3.77. The two are near enough to be the same casting, and the lines are the one published difference that would change how a decorating session feels.

Where the Published Figures Stop Agreeing

himaly Publishes 2 Pounds and 2000 Grams

himaly’s weight field reads 2 lb. Its second bullet says the stand is constructed with heavy aluminum alloy at N.W 2000g. Those are not the same quantity, and they are not close. The same bullet sequence then calls the stand premium stainless steel twice, after introducing it as aluminum alloy, so the listing disagrees with itself about the metal as well as about the mass.

This page quotes both figures and builds nothing on either. What can be relied on from himaly is what its dimensions agree on: 12.2 in across, 7 in for the base and 5.3 in high, published identically in the fields and in the maker’s own line. Those three numbers are the most internally consistent set on this page, which is an odd thing to say about the listing that also contains its worst contradiction.

Ateco Publishes a 4 Inch Height and a 5 Inch Field

Ateco’s own sentence says the turntable measures 12 inches in diameter and stands 4 inches high. Its dimension field says 5. One of those includes something the other does not, most likely the base, and the listing does not say which. For a tool that sits on a counter under a cake, an inch of standing height changes how a scraper is held.

TOTITOM has a smaller version of the same problem, publishing 12 in in its bullets and 11.8 in its size field for the same plate. It also publishes 7.78 lb with no dimensions at all, which makes it the heaviest thing on this page and the one whose footprint cannot be checked. A 304 stainless plate that heavy is the reason it does not need a bearing claim to feel stable, and it is also the reason it will not be moved off the counter often.

Which One Fits Your Kitchen

A plate that gets washed after every cake. None of these five, on the published evidence. Ateco is the only one that tells you where the limit is, wipe with a damp cloth and do not submerge, and knowing that is worth more than four listings calling themselves easy to clean.

Centering a cake without measuring. RICCLE, the only pick with guiding lines printed on its 12 in aluminum plate, on hidden stainless steel ball bearings, at 5.05 lb with a field height of 3.7 in.

A plate that stays put when you want it to. TOTITOM, 304 stainless steel turning both ways and fixable in place, at 7.78 lb. It publishes no dimensions, so measure your own counter space first.

A stand from a maker that publishes its limits. Ateco, the #615, aluminum base and plate with stainless steel ball bearings and a silicone cap underneath, 12 in across, 4.8 lb, and a clear instruction about water.

Everyday decorating on a budget of space. Kootek, 12 in of aluminum alloy on hidden ball bearings with a non slip surface and rubber feet, 5.2 lb, 3.77 in high in its fields. Decorating tips and spatulas are not included and the listing says so.

What We Could Not Verify

Every figure above is from the maker’s own listing. These are the things we went looking for and could not source in any of the eight.

  • No listing publishes a weight capacity for the plate, so how heavy a tiered cake any of these will carry is unstated everywhere.
  • Four of the five call themselves easy to clean and only Ateco says what that means, leaving three turntables with no washing guidance at all.
  • himaly publishes 2 lb in its weight field and 2000 g in its own text, and names both aluminum alloy and stainless steel for the same stand.
  • Ateco publishes 4 in high in its sentence and 5 in its fields, and does not say which figure includes the base.
  • TOTITOM publishes no dimensions of any kind, on the heaviest turntable here at 7.78 lb.
  • None of the five says whether a bearing can be serviced or re greased, which is what decides a turntable used weekly for years.

Frequently asked questions

Can a cake turntable go in the sink?+

Ateco is the only one of these five that answers, and the answer is no: wipe with a damp cloth, do not submerge in water. That is an aluminum base with steel ball bearings inside it, which is exactly the assembly you would not want to flood. The other four describe themselves as easy to clean, and himaly and TOTITOM argue it from the steel, but none of them says whether water is allowed.

Which of these can be stopped from spinning?+

Only TOTITOM. Its listing says the plate rotates clockwise and counterclockwise and can also be easily fixed in place when desired, which is the single most useful sentence on this page for anyone lifting a finished cake off a plate. Ateco, RICCLE, Kootek and himaly all describe a bearing and free rotation, and none of them publishes a brake or any way of holding the plate still.

Do the guide lines on one plate matter?+

They do for everyday work, and RICCLE is the only pick that has them. Centering a layer cake by eye is the first thing that goes wrong when the same job is done quickly and often, and lines printed on a 12 in plate solve that without a ruler. Nothing else on this page publishes any positioning aid, which is why this is the one difference between RICCLE and the very similar Kootek.

Why does one listing publish two different weights?+

himaly's weight field says 2 lb while its own second bullet describes heavy aluminum alloy at N.W 2000g. The two figures are not the same quantity and the listing never reconciles them. The same run of bullets also calls the stand premium stainless steel after introducing it as aluminum alloy. Its dimensions, by contrast, agree everywhere: 12.2 in across, a 7 in base and 5.3 in high.

Is a heavier turntable a better one?+

Weight buys stability and costs everything else. TOTITOM publishes 7.78 lb of 304 stainless steel, which will not move on a counter and will not be lifted onto a shelf often either. Kootek publishes 5.2 lb, RICCLE 5.05 and Ateco 4.8, all in aluminum. None of these listings publishes a weight capacity for the plate, so heavier does not demonstrably mean it carries more cake.

Which figures on these listings should I not trust?+

Three of the five contradict themselves. himaly publishes 2 lb against 2000 g and names two metals for one stand. Ateco publishes 4 in high in its sentence and 5 in in its dimension fields. TOTITOM publishes a 12 in plate in its bullets and 11.8 in its size field, and no dimensions at all elsewhere. Where a listing gives two numbers, this page records both rather than choosing one.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.