
Cake Turntable
The heaviest here at a published 7.78 pounds, in 304 stainless steel, and the only one that can be held still.
- 11.8"
- 7.78 lb
The deciding specification is published weight, because four of these five state a 12 inch plate and one states 12.2, and the figures run from 2 pounds to 7.78.
By the Lush Editorial Team·Researched & Compared
I compared published weights, heights, plate diameters, bearing descriptions, grip features and cleaning guidance across five cake turntables, using each maker's own listing text.

The heaviest here at a published 7.78 pounds, in 304 stainless steel, and the only one that can be held still.

The only pick with guide lines printed on the plate, over hidden ball bearings that turn either way.

A named model on an aluminum base and turntable with stainless steel ball bearings and a silicone cap underneath.

Publishes 5.3 inches of height on a 12.2 inch plate, the most height of any pick here that gives a figure.

The turntable arrives inside a 16 piece set with 3 decorating combs, a 12.5 inch smoother and a 10 inch server.
| Model | Brand | Size (Capacity) | Weight | Best For |
|---|---|---|---|---|
| Cake Turntable | TOTITOM | 11.8" | 7.78 lb | Best for tall cakes and a bench scraper |
| Kootek 12" Silver Aluminum Alloy Cake Turntable | Kootek | 12 Inch | 5.2 lb | Best for centering a cake board first time |
| Ateco Revolving Cake Decorating Stand | Ateco | #615 12" Round, Aluminum Base | 4.8 lb | Best for the stand the trade has always used |
| Cake Stand Rotating 12" | himaly | 12.2" | 2 lb | Best for working at a higher level |
| hvominxs Aluminum Cake Turntable Set with Revolving ... | hvominxs | not published | 3.97 lb | Best for a beginner with no tools yet |

The heaviest here at a published 7.78 pounds, in 304 stainless steel, and the only one that can be held still.

The only pick with guide lines printed on the plate, over hidden ball bearings that turn either way.

A named model on an aluminum base and turntable with stainless steel ball bearings and a silicone cap underneath.

Publishes 5.3 inches of height on a 12.2 inch plate, the most height of any pick here that gives a figure.

The turntable arrives inside a 16 piece set with 3 decorating combs, a 12.5 inch smoother and a 10 inch server.
TOTITOM is the heaviest of the five at a published 7.78 pounds, the only one made from 304 stainless steel and the only one that can be held still for lettering. Kootek is the only pick with guide lines on the plate. Ateco names stainless steel ball bearings in an aluminum body at 4.8 pounds. himaly publishes 5.3 inches of height. hvominxs supplies its turntable inside a 16 piece decorating set.
“A turntable that travels under a scraper is no turntable.”
Lush Food & Drink
Almost every option is 12 inches and these five prove it: Ateco, Kootek, TOTITOM and hvominxs all state 12 inches and himaly 12.2. A 12 inch plate takes a 10 inch cake board with room for your fingers, which is why the size is standard. Since diameter barely varies, spend your attention on weight and height instead, where the differences between these five are large.
Because you push sideways against it. Smoothing the side of a cake with a bench scraper puts a horizontal load on the plate, and a light stand slides or rocks. TOTITOM publishes 7.78 pounds in 304 stainless steel, Kootek 5.2 and Ateco 4.8 in aluminum. himaly publishes 2 pounds in one place and 2000 grams in another. If you frost tall cakes, buy the mass.
It depends on your counter and your height. Kootek publishes 3.77 inches, Ateco 4 inches in its own text, and himaly 5.3. Lower means your elbows stay in and you look down on the top of the cake. Higher brings the side of the cake nearer eye level, which is where a scraper wants to be. TOTITOM and hvominxs publish no height at all.
Steel is heavier and more chemically resistant, aluminum is stiffer for its weight. TOTITOM is the only pick that names a grade, 304 stainless, which resists lemon curd and fruit fillings without pitting. Ateco, Kootek and hvominxs use aluminum or aluminum alloy, the traditional choice. himaly describes itself as both aluminum alloy and stainless steel in the same listing, which means neither claim can be relied on.
One of these five says so. TOTITOM states that the plate turns clockwise and counterclockwise and can also be easily fixed in place when desired, and offers that specifically for steady lettering and delicate piped flowers. Ateco, Kootek, himaly and hvominxs publish nothing about holding the plate still, so on those four you steady it with your other hand while you write.
By hand, on every one of these. Ateco says wipe with a damp cloth and do not submerge in water, which protects the bearing. Kootek states hand wash, not suitable for a dishwasher, and keep it dry afterwards. hvominxs says a dishwasher is not recommended for its tools. himaly and TOTITOM both claim easy cleaning without naming a method, and no listing says the plate lifts off for cleaning underneath.
Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.
Almost every turntable sold is a 12 inch plate, and these five are no exception: Ateco, Kootek, TOTITOM and hvominxs all state 12 inches, and himaly states 12.2. Diameter is therefore not the specification. Weight is, because the plate has to resist a bench scraper pushed against a cake, and the published figures here run from 2 pounds to 7.78, which is a fourfold difference in the same footprint.
Height is the other figure that changes how it feels to use. Kootek publishes 3.77 inches, Ateco says 4 inches in its own text although its dimension field reads 5, and himaly publishes 5.3. TOTITOM and hvominxs publish no height at all. An inch and a half of difference decides whether you work with your elbows in or stand over the cake.
| Specification | Ateco 615 | Kootek 12 Inch | himaly 12.2 Inch | TOTITOM 304 Steel | hvominxs 16 Pc Set |
|---|---|---|---|---|---|
| Plate diameter | 12 in | 12 in | 12.2 in | 12 in, 30 cm | 12 in |
| Height | 4 in in its own words, 5 in the fields | 3.77 in | 5.3 in | not published | not published |
| Material stated | Aluminum base and turntable | Aluminum alloy | Heavy aluminum alloy, and also stainless steel | 304 stainless steel | Heavy duty aluminum alloy |
| Bearings | Stainless steel ball bearings | Hidden ball bearings | Stainless steel bearing | Stainless steel bearings | not published |
| Turns both ways | not published | Clockwise and anti clockwise | Full 360 degrees | Clockwise and counterclockwise | not published |
| Can be held still | not published | not published | not published | Stated, for lettering and flowers | not published |
| Grip on the counter | Silicone cap on the base | Non slip surface and rubber feet | Non slip surface and rubber feet | Rubberized bottom and a silicone pad | Non slip surface and rubber feet |
| Guide lines on the plate | not published | Stated | not published | not published | not published |
| Cleaning guidance | Damp cloth, do not submerge | Hand wash, not suitable for a dishwasher | Easy to clean, no method given | Easy to clean, no method given | Dishwasher not recommended for the tools |
| Tools included | not published | not published | not published | not published | 16 pieces, with 3 combs, a 12.5 in smoother and a 10 in server |
| Net weight restated in the listing text | not restated | not restated | 2000 g | not restated | not restated |
| Published weight | 4.8 lb | 5.2 lb | 2 lb | 7.78 lb | 3.97 lb |
| Model or heritage stated | Model 615, family run since 1905 | not published | not published | not published | not published |
What the table cannot tell you is how much side load the bearing takes before the plate tilts, which is the failure people actually meet: press a scraper against the side of a tall cake and a cheap turntable rocks on its column. Not one of these five publishes a load rating, a bearing size or a bearing count. Nor does any of them say how the plate comes off the base, or whether it comes off at all.
TOTITOM is the heaviest of the five at a published 7.78 pounds, in 304 stainless steel, and that mass is the whole argument for it. Kootek follows at 5.2 pounds and Ateco at 4.8, both aluminum, which is the weight range most professional stands occupy. hvominxs publishes 3.97 pounds, but that figure covers a turntable plus 15 other pieces, so the stand itself must be lighter than the number suggests.
himaly is where the data stops making sense. Its published weight is 2 pounds, while its own feature text states a net weight of 2000 grams, which is more than twice that. One of those two figures is wrong and the listing gives no way to tell which. For a product whose main job is to not move, a weight you cannot trust is the worst possible gap.
Mass alone is not the answer, and every one of these five adds grip. Ateco fits a non slip silicone cap to the base, which the listing says eliminates unwanted sliding. Kootek, himaly and hvominxs all use the same two part approach: a non slip surface on top so the cake board does not skate, and rubber feet underneath so the stand does not travel.
TOTITOM describes its grip in two separate parts, a non skid rubberized bottom for stability plus a silicone anti slip pad to improve adhesion, and it is the only pick that names two features under the base. Both sit on the heaviest stand here at a published 7.78 pounds. Kootek is the only pick that also puts guide lines on the plate, for centering a cake board before you start.
Four of the five name a bearing. Ateco specifies stainless steel ball bearings in an aluminum base and turntable, which is the construction the trade has used for decades. Kootek describes built in hidden ball bearings, himaly a stainless steel bearing it calls durable and flexible, and TOTITOM stainless steel bearings inside a 304 stainless body. None of the four says how many bearings or what size.
hvominxs names no bearing at all, which is the clearest sign that its turntable is the least of its sixteen pieces. Its turntable bullet talks only about heavy duty aluminum alloy, stability on countertops, a non slip surface and rubber feet. If the plate is the part you care about, a kit that does not describe its rotation is not where to look for it.
TOTITOM is the only pick with a feature nobody else mentions: the plate turns clockwise and counterclockwise and can also be easily fixed in place when you want it still, which the listing offers for steady lettering and delicate flowers. Anyone who has tried to write on a cake on a free spinning turntable will recognize the problem immediately.
Kootek and himaly both emphasize free rotation instead, Kootek naming clockwise and anti clockwise and himaly a full 360 degrees, and both point out this suits left and right handed decorators equally. Ateco describes smooth and steady rotation without saying whether it turns both ways. Nothing here publishes a resistance figure, so how much drag the plate has is unknowable until it arrives.
Ateco, Kootek and hvominxs are aluminum or aluminum alloy, which is the traditional choice because it is stiff for its weight and cheap to cast. TOTITOM is 304 stainless steel, the only pick that names a steel grade, and 304 is the grade that resists the acid in fruit fillings and lemon curd. It is also why TOTITOM weighs 7.78 pounds, because steel is denser than aluminum.
himaly cannot decide. One bullet describes heavy aluminum alloy at 2000 grams and the next two describe premium stainless steel, saying both the polished plate and the stand are stainless. Those are different metals with different weights and different cleaning behavior, and a listing that claims both has told you nothing. Its published 12.2 by 7 by 5.3 inch size is at least internally consistent.
Two were the same aluminum turntable in pink and in silver from one maker, with identical feature text down to the guiding lines and the hidden stainless steel ball bearings, and identical published dimensions. The pink listing publishes a weight and the silver publishes none at all. Their specification is Kootek’s specification as well, guide lines over hidden ball bearings on an aluminum alloy plate, so one of the two designs was enough.
The third is more interesting. It is a stainless steel round cake stand, and across its five feature bullets it never once mentions rotation, a bearing or a non slip base. It mentions easy assembly instead. That reads as a display stand rather than a decorating turntable. Every pick here names a grip feature and four of the five name a bearing outright, so a listing that publishes neither is a different product under the same search term.
The baker who wants the stand professionals use. Ateco names its model 615 and its aluminum base and turntable run on stainless steel ball bearings, with a silicone cap under the base. Its own text gives 12 inches across and 4 inches high, at 4.8 pounds. Wipe with a damp cloth and never submerge it.
The decorator who centers by eye and gets it wrong. Kootek is the only pick with guide lines printed on the plate for positioning a cake or board, alongside hidden ball bearings that turn both ways, a non slip surface and rubber feet. At 12 by 12 by 3.77 inches and 5.2 pounds, and hand wash only.
The baker who wants the cake higher up. himaly publishes 5.3 inches of height, the most of any pick that gives one, on a 12.2 inch plate, with a stainless steel bearing and rubber feet. Its own listing calls the metal both aluminum alloy and stainless steel, and gives two weights that disagree.
The one working on tall cakes with a bench scraper. TOTITOM is 304 stainless steel at a published 7.78 pounds, the heaviest here, with a rubberized bottom and a silicone pad, and it is the only pick that can be held still for lettering. It publishes no height, and its size field says 11.8 inches where its title says 12.
The beginner who owns no decorating tools. hvominxs supplies the turntable inside a 16 piece set with 3 stainless steel decorating combs, a 12.5 inch icing smoother and a 10 inch cake server. Its turntable bullet names no bearing at all, and its 3.97 pound weight covers the whole box.
A turntable is a bearing in a housing, and nothing about the bearing is published by anyone: