Lush Food & Drink

Buying Guide ·Preserving

Best Reusable Fermentation Lids With Nothing Small to Lose

The deciding specification is how many separate parts go on each jar, because a one piece silicone cap cannot be lost and a four part airlock kit can.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

I compared parts per jar, what each part is, pieces per purchase, valve type, published sizes and weights, jar fit, cleaning and spares across eight reusable fermentation lid listings.

Our shortlist

Five products, one set of published numbers.
  1. Masontops Pickle Pipes - Airlock Fermentation Lids -...
    Best for having nothing to assemble

    Masontops Pickle Pipes - Airlock Fermentation Lids -...

    One piece of silicone per jar, with a one way waterless valve molded into it that Masontops states vents gas automatically while fermenting vegetables, so no burping and no water to manage. It makes the space argument directly, stating a low profile lid that makes storage easier and a valve design that takes up less space, and publishes 3.3 by 3.3 by 0.5 inches, which is half an inch standing above the jar rim. The silicone is stated food and dishwasher safe, BPA free and free of phthalates, tough and durable, and four caps come in the pack. There is nothing here to lose and nothing to replace.

    • Masontops
    • Wide Mouth 4PK
    • 0.05 lb
  2. Original Patented Airlock Fermentation Lids for Wide...
    Best one piece cap with a date on it

    Original Patented Airlock Fermentation Lids for Wide...

    The same single piece idea with one useful addition that costs no extra component: Mfacoy sets a date tracker into the silicone cap, so several jars started on different days can be told apart without a label or a marker pen. The valve is a patented one way design stated to vent excess carbon dioxide without manual burping or water. The silicone is 100 percent BPA free, stated dishwasher safe and not to crack or warp, and the lids are described as low profile and space saving in a cabinet. Published at 3.31 by 3.31 by 0.1 inches and 0.24 lb, and it publishes no count of caps in the pack.

    • Mfacoy
    • Wide Mouth
    • 0.24 lb
  3. JILLMO Stainless Steel Fermentation Lids for Wide Mo...
    Best kit for when a small part goes missing

    JILLMO Stainless Steel Fermentation Lids for Wide Mo...

    The only listing in this pool that plans for loss, which on a four part assembly is the right thing to plan for. JILLMO supplies four stainless steel fermentation lids with seals, four BPA-free airlocks and four silicone grommets, then adds extra grommets and states a one year replacement for damaged small parts, describing the components as replaceable. It is also the most precise on fit anywhere in the pool, stating standard 3.38 inch or 86 mm wide mouth jars from 8 oz to 64 oz. Published at 0.6 lb with package dimensions of 3.38 by 3.38 by 1.18 inches. It publishes nothing about a dishwasher.

    • JILLMO
    • Pack of 4
    • 0.6 lb
  4. Fermentation Lids for Wide Mouth Mason Jars
    Best for running six jars at once

    Fermentation Lids for Wide Mouth Mason Jars

    Six complete sets in one purchase: Xelyra states six stainless steel fermenting lids, six airlocks, six silicone rings and six silicone grommets, which is enough to start six jars on the same afternoon. Each lid carries a built-in date tracker for marking when a ferment began, and the fit is stated for standard wide mouth mason jars from 4 oz to 64 oz, the widest jar range in the pool. Cleaning is described as a simple rinse after each batch. The cost is arithmetic: four parts across six sets is twenty four separate components to keep together, and the listing publishes no size, no weight and nothing about spares.

    • Xelyra
    • 6pcs lids
    • Weight not listed
  5. Fermentaholics 2 Pack - 110mm One Gallon Fermentatio...
    Best for a gallon jar rather than a mason jar

    Fermentaholics 2 Pack - 110mm One Gallon Fermentatio...

    The only pick built for a gallon jar, stating a fit for standard 110 mm gallon jars and for the maker's own. Fermentaholics supplies a fermentation lid, a silicone gasket, a grommet and an S airlock in a two pack, and is the only listing here to state that every one of those parts is food grade and dishwasher safe rather than claiming it for the lid alone. The S airlock is the bent type that holds liquid in a trap, so the jar has to stay upright and the water level has to be watched, which is a different routine from a dry one way valve. Published at 0.26 lb, with no dimensions.

    • Fermentaholics
    • 2 Pack - Lid & S-Airlocks
    • 0.26 lb

Side by side

Blank means the maker does not publish it.
ModelBrandSize (capacity)WeightBest for
Masontops Pickle Pipes - Airlock Fermentation Lids -... Masontops Wide Mouth 4PK 0.05 lb Best for having nothing to assemble
Original Patented Airlock Fermentation Lids for Wide... Mfacoy Wide Mouth 0.24 lb Best one piece cap with a date on it
JILLMO Stainless Steel Fermentation Lids for Wide Mo... JILLMO Pack of 4 0.6 lb Best kit for when a small part goes missing
Fermentation Lids for Wide Mouth Mason Jars Xelyra 6pcs lids not published Best for running six jars at once
Fermentaholics 2 Pack - 110mm One Gallon Fermentatio... Fermentaholics 2 Pack - Lid & S-Airlocks 0.26 lb Best for a gallon jar rather than a mason jar

Each pick in detail

What the listing says for it, and against it.
1 Best for having nothing to assemble

Masontops Pickle Pipes - Airlock Fermentation Lids -...

One piece of silicone per jar, with a one way waterless valve molded into it that Masontops states vents gas automatically while fermenting vegetables, so no burping and no water to manage. It makes the space argument directly, stating a low profile lid that makes storage easier and a valve design that takes up less space, and publishes 3.3 by 3.3 by 0.5 inches, which is half an inch standing above the jar rim. The silicone is stated food and dishwasher safe, BPA free and free of phthalates, tough and durable, and four caps come in the pack. There is nothing here to lose and nothing to replace.

  • For it
  • One piece per jar, so nothing to assemble or lose
  • Publishes 3.3 by 3.3 by 0.5 inches, a low profile above the rim
  • Waterless one way valve, stated to vent automatically
  • Food and dishwasher safe, BPA and phthalate free
  • Against it
  • Publishes no weight
  • Silicone rather than steel, so a wear item
  • No date tracking
2 Best one piece cap with a date on it

Original Patented Airlock Fermentation Lids for Wide...

The same single piece idea with one useful addition that costs no extra component: Mfacoy sets a date tracker into the silicone cap, so several jars started on different days can be told apart without a label or a marker pen. The valve is a patented one way design stated to vent excess carbon dioxide without manual burping or water. The silicone is 100 percent BPA free, stated dishwasher safe and not to crack or warp, and the lids are described as low profile and space saving in a cabinet. Published at 3.31 by 3.31 by 0.1 inches and 0.24 lb, and it publishes no count of caps in the pack.

  • For it
  • One piece per jar with a date dial built in
  • Publishes 3.31 by 3.31 by 0.1 inches and 0.24 lb
  • Patented one way valve, no burping and no water
  • Stated dishwasher safe and not to crack or warp
  • Against it
  • Publishes no count of caps in the pack
  • Its 0.1 inch height figure is shorthand rather than a measurement
  • Silicone rather than steel
3 Best kit for when a small part goes missing

JILLMO Stainless Steel Fermentation Lids for Wide Mo...

The only listing in this pool that plans for loss, which on a four part assembly is the right thing to plan for. JILLMO supplies four stainless steel fermentation lids with seals, four BPA-free airlocks and four silicone grommets, then adds extra grommets and states a one year replacement for damaged small parts, describing the components as replaceable. It is also the most precise on fit anywhere in the pool, stating standard 3.38 inch or 86 mm wide mouth jars from 8 oz to 64 oz. Published at 0.6 lb with package dimensions of 3.38 by 3.38 by 1.18 inches. It publishes nothing about a dishwasher.

  • For it
  • The only listing shipping spare grommets and a one year replacement
  • The most precise fit statement, 3.38 in or 86 mm, 8 oz to 64 oz
  • Stainless steel lids with replaceable components
  • Four complete sets, published at 0.6 lb
  • Against it
  • Four parts per jar to assemble and store
  • Publishes nothing about a dishwasher
  • Publishes no height for the assembled airlock
4 Best for running six jars at once

Fermentation Lids for Wide Mouth Mason Jars

Six complete sets in one purchase: Xelyra states six stainless steel fermenting lids, six airlocks, six silicone rings and six silicone grommets, which is enough to start six jars on the same afternoon. Each lid carries a built-in date tracker for marking when a ferment began, and the fit is stated for standard wide mouth mason jars from 4 oz to 64 oz, the widest jar range in the pool. Cleaning is described as a simple rinse after each batch. The cost is arithmetic: four parts across six sets is twenty four separate components to keep together, and the listing publishes no size, no weight and nothing about spares.

  • For it
  • Six complete sets, enough for six jars at once
  • Built-in date tracker on every lid
  • The widest stated jar range, 4 oz to 64 oz
  • Stainless lids with food grade silicone rings and grommets
  • Against it
  • Twenty four separate components to keep together
  • Publishes no dimensions and no weight
  • Says nothing about spares or replacements
5 Best for a gallon jar rather than a mason jar

Fermentaholics 2 Pack - 110mm One Gallon Fermentatio...

The only pick built for a gallon jar, stating a fit for standard 110 mm gallon jars and for the maker's own. Fermentaholics supplies a fermentation lid, a silicone gasket, a grommet and an S airlock in a two pack, and is the only listing here to state that every one of those parts is food grade and dishwasher safe rather than claiming it for the lid alone. The S airlock is the bent type that holds liquid in a trap, so the jar has to stay upright and the water level has to be watched, which is a different routine from a dry one way valve. Published at 0.26 lb, with no dimensions.

  • For it
  • The only pick for a gallon jar, stated at 110 mm
  • States every part is dishwasher safe, not just the lid
  • Airtight seal from a gasket that adheres to lid and jar
  • Published at 0.26 lb
  • Against it
  • An S airlock holds water that has to be watched
  • Four parts per jar
  • Publishes no dimensions at all

Our verdict

Two of these are a single silicone cap with the valve molded in: Masontops at 3.3 by 3.3 by 0.5 inches, and Mfacoy which adds a date dial. The other three assemble from four parts. JILLMO is the only kit that ships spare grommets and states a one year replacement. Xelyra supplies six sets, twenty four components in total. Fermentaholics is the only gallon jar pick, with an S airlock that holds water.

“A grommet the size of a coin is a thing you lose.”

Lush Editorial Team

What separates these five

One part per jar, or four Masontops and Mfacoy are a single molded silicone cap. JILLMO, Xelyra and Fermentaholics each assemble a lid, a seal, a grommet and an airlock.
Six sets is twenty four components Xelyra supplies six lids, six airlocks, six rings and six grommets. That is the most jars at once here and the most small parts to keep together.
One maker ships spares JILLMO includes extra silicone grommets and states a one year replacement for damaged small parts. Nothing else in the pool plans for a lost component.
Two listings publish a height Masontops states 0.5 inches above the rim and Mfacoy 0.1. None of the three airlock kits publishes a height with the airlock fitted.
Two lids carry a date dial Mfacoy and Xelyra both build date tracking into the lid, so jars started on different days can be told apart without a label.

How we chose

Priorities, not a computed score. The inputs are published specifications, so we rank by what matters most and say how much.

  1. 32% How many parts go on each jarMasontops and Mfacoy are one molded silicone cap with the valve inside it, so there is nothing to assemble and nothing to mislay. JILLMO, Xelyra and Fermentaholics each need a lid, a seal or gasket, a grommet and a separate airlock fitted to every jar, and Xelyra's six sets come to twenty four small components in total.
  2. 22% What happens when a part is lostJILLMO is alone in addressing it, shipping extra silicone grommets and stating a one year replacement for damaged small parts, and describing its components as replaceable. The other two kits publish nothing on the subject, and a missing grommet takes a lid out of service. The one piece caps sidestep the question entirely.
  3. 18% How much the lid stands above the jarMasontops publishes 0.5 inches and states a low profile that makes storage easier. Mfacoy states low profile too, publishing a 0.1 inch figure best read as shorthand. None of the three airlock kits publishes a height with the airlock fitted, which is the figure a fridge shelf needs.
  4. 16% Which jars it actually fitsJILLMO is the most precise, stating 3.38 inch or 86 mm wide mouth jars from 8 oz to 64 oz. Xelyra states 4 oz to 64 oz. Masontops and Mfacoy state wide mouth mason jars without a range. Fermentaholics is the outlier and states 110 mm gallon jars, which is a different purchase entirely.
  5. 12% What cleaning each part involvesFermentaholics makes the fullest claim, stating the lid, gasket, grommet and S airlock are all dishwasher safe. Masontops and Mfacoy both state dishwasher safe silicone. Xelyra offers only a rinse after each batch, and JILLMO publishes nothing about a dishwasher despite supplying four parts per jar.

How the Five Compare on the Numbers

A fermentation lid is either one object or four. Two of these listings are a single molded silicone cap with the valve built into it. The other three are kits: a lid, a sealing ring or gasket, a rubber grommet and a separate airlock, all of which have to be assembled onto every jar and then stored somewhere between batches. In a kitchen with one drawer, a grommet the size of a coin is a thing you lose.

That count is the deciding figure here, and it is not the same question as how much drawer space the lids take. A four part kit for six jars is twenty four small components. The table gives the part count first, then what each part is, then the figures the makers publish about size and fit.

Specification Masontops Mfacoy JILLMO Xelyra Fermentaholics
Parts per jar One One Four Four Four
What those parts are Silicone cap with a valve Silicone cap, valve and date dial Steel lid, seal, grommet, airlock Steel lid, silicone ring, grommet, airlock Lid, gasket, grommet, S airlock
Pieces in the purchase Four caps not published Four of each, plus spare grommets Six of each Two lids and two S airlocks
Valve type Waterless, one way Waterless, one way Airlock Airlock S airlock
Low profile stated Yes Yes not published not published not published
Published dimensions 3.3 x 3.3 x 0.5 in 3.31 x 3.31 x 0.1 in 3.38 x 3.38 x 1.18 in, the package not published not published
Published weight not published 0.24 lb 0.6 lb not published 0.26 lb
Jar fit stated Wide mouth mason Standard wide mouth mason 3.38 in or 86 mm, 8 oz to 64 oz Wide mouth, 4 oz to 64 oz Gallon jars, 110 mm
Dishwasher stated Yes Yes not published Rinse after each batch Yes, every part
Spares or replacement stated not published not published Spare grommets, one year replacement not published not published
Date tracking not published Built-in date tracker not published Built-in date tracker not published

What the table cannot tell you is how tall an assembled airlock stands. None of the three kit listings publishes a height for the lid with the airlock fitted, which is the figure that decides whether a jar goes on a fridge shelf or has to sit on a counter for a week. Masontops publishes 0.5 inches and Mfacoy 0.1 inches, both for a flat cap, and those are the only height figures in the pool.

One Part Per Jar, or Four

The Two Caps That Are a Single Piece

Masontops is one piece of silicone with a one way waterless valve molded into it, described as venting gas automatically while fermenting so the jar does not need burping. There is nothing to assemble and nothing to lose, it is stated food and dishwasher safe, BPA free and free of phthalates, and four caps arrive in the pack.

Mfacoy adds one thing to the same idea without adding a part: a date dial set into the cap so you can see when a ferment started. It is 100 percent BPA free silicone, stated dishwasher safe and not to crack or warp, published at 3.31 by 3.31 by 0.1 inches and 0.24 lb. Both of these are the answer if the kitchen has no spare drawer and no patience for small components.

The Three Kits That Assemble

JILLMO, Xelyra and Fermentaholics all build the same arrangement from separate pieces. JILLMO states four stainless steel lids with seals, four BPA-free airlocks and four silicone grommets. Xelyra states six stainless lids, six airlocks, six silicone rings and six grommets. Fermentaholics states a lid, a silicone gasket, a grommet and an S airlock, in a two pack.

The trade is real rather than notional. An airlock limits outside air in a way a one way valve does not claim to, and a steel lid will outlast silicone. Against that, Xelyra’s six sets are twenty four separate components to store, and a missing grommet takes a lid out of service until it is replaced.

What Sticks Up Above the Jar

Two Listings State a Low Profile

Masontops makes the space argument directly, stating a low profile lid that makes storage easier and a silicone valve design that takes up less space. It publishes 3.3 by 3.3 by 0.5 inches, so half an inch above the jar rim. Mfacoy states low profile lids that seal tightly while saving space in cabinets, and publishes a 0.1 inch figure that is best read as a flat disc rather than a precise height.

Neither of the two kits for wide mouth jars publishes any height at all. An airlock is a tube of plastic standing above the lid, and Fermentaholics’ is an S airlock, the bent type that holds water in a trap. None of the three kit listings says how tall the assembly is, which for a fridge shelf is the figure that matters most.

The Airlock That Needs Water In It

Fermentaholics is the only pick here using an S airlock, and the only one built for a gallon jar rather than a mason jar, stating a fit for standard 110 mm gallon jars. An S airlock works by holding liquid in a curve, so the assembly has to stay upright and the water level has to be checked, which is a different routine from a valve that vents dry.

That is exactly what Masontops and Mfacoy are selling against, both describing automatic venting with no burping and no water to manage. Fermentaholics answers with completeness instead: it states the lid, the gasket, the grommet and the S airlock are all food grade and all dishwasher safe, which is the only listing in the pool to cover every part in one cleaning claim.

What Happens When a Small Part Goes Missing

One Maker Ships Spares

JILLMO is the only listing in this pool that plans for loss. It states extra silicone grommets are included and a one year replacement for damaged small parts, and separately that the lids, grommets and components are replaceable. For a four part assembly used on jars that sit around for weeks, that is the difference between a kit and a consumable.

It is also the most precise on fit, stating a design for standard 3.38 inch, 86 mm wide mouth jars from 8 oz to 64 oz. Xelyra states a wider range, 4 oz to 64 oz, across six sets, and adds a built-in date tracker on each lid, but says nothing about spares. Published figures for JILLMO are 0.6 lb with package dimensions of 3.38 by 3.38 by 1.18 inches.

Where the Figures Run Out

Two of the five publish no dimensions at all. Xelyra publishes neither a size nor a weight, describing six complete sets in stainless steel, BPA-free plastic and food grade silicone without a figure attached to any of it. Fermentaholics publishes 0.26 lb and a 110 mm jar diameter and nothing else.

Masontops publishes no weight, and Mfacoy’s 0.1 inch height should be read as shorthand. Two listings were left out of the picks for the same reason: one is a third silicone cap covering the same ground as Masontops and Mfacoy, and the other is a four lid plastic airlock kit whose only published figures describe a 4.5 by 4 by 5.5 inch box.

Which One Fits Your Kitchen

No drawer for small parts. Masontops is one piece of silicone per jar with the one way waterless valve built in, stated low profile for easier storage, food and dishwasher safe, BPA and phthalate free, published at 3.3 by 3.3 by 0.5 inches. Four caps arrive, and there is nothing to assemble.

One piece, and a date you can read. Mfacoy is the same single cap idea with a date dial set into the silicone, so several jars can be told apart at a glance without a label. Stated BPA free, dishwasher safe and not to crack or warp, published at 3.31 by 3.31 by 0.1 inches and 0.24 lb.

A kit that expects to lose a grommet. JILLMO supplies four steel lids with seals, four airlocks and four grommets, plus spare grommets and a stated one year replacement for damaged small parts. It is the most precise on fit, stating 3.38 inch or 86 mm wide mouth jars from 8 oz to 64 oz, at a published 0.6 lb.

Six jars at once, with dates. Xelyra supplies six stainless lids, six airlocks, six silicone rings and six grommets, each lid carrying a built-in date tracker, for wide mouth jars from 4 oz to 64 oz. That is twenty four components to keep together, and the listing publishes no size and no weight.

A gallon jar rather than a mason jar. Fermentaholics is the only pick for a gallon jar, stating a fit for standard 110 mm jars with a lid, gasket, grommet and S airlock, all of which it states are dishwasher safe. Two sets at a published 0.26 lb, and an S airlock needs its water checked.

What We Could Not Verify

All of this comes from the makers’ own listing text. These are the questions it leaves open.

  • None of the three airlock kits publishes the height of the lid with the airlock fitted.
  • Two of the five publish no dimensions at all, and two publish no weight.
  • Only one listing states that spare small parts are included or replaceable.
  • No maker states how much liquid an S airlock needs or how often to top it up.
  • Mfacoy’s published height of 0.1 inches is best read as shorthand for a flat cap.
  • No listing states whether jars fitted with an airlock can be stacked or stood on a shelf.

Frequently asked questions

What is the difference between a silicone cap and an airlock lid?+

Part count, mainly. Masontops and Mfacoy are a single molded silicone cap with a one way waterless valve built into it, so nothing is assembled and nothing can be mislaid. JILLMO, Xelyra and Fermentaholics each fit four parts to every jar: a lid, a seal or gasket, a rubber grommet and a separate airlock. The kits argue that an airlock limits outside air more thoroughly and that a steel lid lasts longer, and both of those are fair, but it is four times as many things to keep.

How much does a fermentation lid stick up above the jar?+

Only the one piece caps say. Masontops publishes 3.3 by 3.3 by 0.5 inches and states a low profile lid that makes storage easier, so half an inch above the rim. Mfacoy also states low profile and publishes a 0.1 inch figure that reads as shorthand for a flat disc. None of the three airlock kits publishes a height with the airlock fitted, which is exactly the figure you need to know whether a fermenting jar will go on a fridge shelf.

What happens if I lose a grommet?+

On four of these five listings, nothing good, because the lid will not seal without it. JILLMO is the only one that anticipates it, including extra silicone grommets in the box and stating a one year replacement for damaged small parts, with the components described as replaceable. Xelyra and Fermentaholics publish nothing on the subject. Masontops and Mfacoy have no grommet at all, which is the simplest answer to the question.

Which of these fits a gallon jar?+

Only Fermentaholics, which states a fit for standard 110 mm gallon jars and for the maker's own gallon jars, supplied as a two pack with a lid, silicone gasket, grommet and S airlock in each. The other four picks are all for wide mouth mason jars: JILLMO states 3.38 inch or 86 mm from 8 oz to 64 oz, Xelyra 4 oz to 64 oz, and Masontops and Mfacoy state standard wide mouth without giving a range.

Do these need water in them?+

Two kinds do not and one does. Masontops and Mfacoy both use a one way waterless valve and state it vents gas automatically with no burping and no water to manage. JILLMO and Xelyra use airlocks, which conventionally hold liquid, though neither listing says so. Fermentaholics is explicit that its airlock is an S airlock, the bent type that holds water in a trap, so the jar must stay upright and the level watched. No maker states how much liquid to use or how often to top it up.

Which listings were left out of the five, and why?+

Two. One is a third single piece silicone cap with a one way valve for 86 mm wide mouth jars in assorted colors, which covers the same ground as Masontops and Mfacoy without adding a figure either of them lacks. The other is a four lid plastic airlock kit for wide mouth jars whose only published dimensions, 4.5 by 4 by 5.5 inches, describe the box rather than the lid, so it cannot be placed against JILLMO on either fit or height.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.