How the Five Compare on the Numbers
A jar spatula is a long thin blade, so it has three axes and only two of them matter for a drawer: how long it is and how wide the head is. Every one of these five size entries publishes exactly those two and leaves the third out. What differs is where the third figure then turns up, and on one of these five it never turns up at all.
Three of the five fill a height field and every one of those three reads 0.1 inches, which looks like a placeholder until you read the fifth listing, whose own bullet publishes 0.1in as the thickness. Four of the five publish a measurement in a bullet as well as in the entry, two publish a weight, and three publish a temperature.
What the table cannot tell you on its own is that three of these five are the same length in a different unit. TraVisonyx states 24cm and 9.46inch for one object, so 24 centimeters is this pool’s standard. ZMOIVOK and ZQLZYC both publish 9.45 inches, which is 24.0 centimeters exactly. Three separate sellers, one length, written two ways.
The Two Axes Every Entry Publishes
A Labeled Pair, and a Third Figure Only a Field Gives
Addyno is the only entry on this page that says which figure is which, marking 10 inches as the length and 0.9 inches as the width, and then adding the word inch again after both figures already carry inch marks. Its depth and width fields read 10.0 and 0.9, so the pair is confirmed, and its second bullet repeats the 10 inch length as a reach claim.
What no part of its own text gives is a thickness. The height field reads 0.1 inches and no bullet, no title and no entry mentions it, so that figure arrives with no author. The listing is otherwise the most forthcoming here on construction: a thicker internal core with strengthened connections, seamless silicone rated to 600 F, five spatulas, and dishwasher clearance. No weight is published.
The Only Entry Whose Maker Publishes Both Units
TraVisonyx writes 9.46 by 0.9 inches in its entry and its first bullet does something no other listing here does: it gives both figures in both units, as 24cm with 9.46inch for the length and 2.3cm with 0.9inch for the width. That is a measurement a reader can check in either system without leaving the page.
Its width and depth fields carry 0.9 and 9.46 inches, matching the entry, and its height field carries the same unexplained 0.1 as Addyno’s. Three spatulas arrive in red, black and purple, with a stainless steel core inside, a temperature range of minus 40 C to 230 C, and clearance for a gentle rinse or a dishwasher. No weight and no thickness is published.
What the Third Axis Turns Out to Be
One Bullet That Gives All Three
ZQLZYC publishes 9.45 by 1 inches in its entry and then, in a bullet headed Product Information, the full triple: 9.45in by 1in by 0.1in. It is the only maker of these five to put a thickness in writing, and the figure it gives is 0.1 inches, which is exactly what sits in the height field of three other listings on this page.
That changes how those three fields should be read. A 0.1 figure repeated across unrelated sellers looks like an unpopulated field until one of them states it as a real measurement, and one of them does. Its own dimension fields are empty, so the entry and that bullet are its only sources. Three spatulas, 0.2 lb for the set, an integrated one piece build, dishwasher or rinse, and no temperature figure at all.
A Width Field in the Wrong Unit
ZMOIVOK writes 9.45 by 0.91 inches and its fields read 9.44 and 2.3. The length is a near match. The width is not, and 2.3 is not a plausible inch figure for a tool meant to pass a jar neck. The TraVisonyx listing decodes it: that seller publishes 2.3cm with 0.9inch as one width, so 2.3 is the centimeter value of a figure like 0.91 inches.
So this width field is a centimeter reading sitting in an inch slot, on the same listing whose length field is in inches, and the entry is the figure to use. The listing is the thinnest here otherwise. No count appears in the title or any bullet, so how many spatulas arrive is unpublished, no temperature figure is given beyond the words heat resistance, no core is named, and its third and fourth bullets are the same sentence printed twice.
Where Centimeters and Inches Meet
A Metric Pair With the Inch Pair Beside It
Patelai is the only entry here written in centimeters, at 28 by 3.5. Its third bullet gives both systems, stating that the scrapers measure about 28 by 3.5 cm, or 11 by 1.4 inches, and its width and depth fields read 1.4 and 11.0. So three sources agree and the conversion is sound in both directions, which is more than any other listing on this page achieves.
It is also the only one of these five with no third axis anywhere: no thickness in the entry, none in a bullet, and no height field. On a tool this flat that is defensible, and it is still the one figure a drawer cares about after length. Two spatulas at 0.26 lb, a stainless steel core, no seams or cracks, suspension holes for hanging, and minus 60 C to 250 C, the widest range published here.
Twenty Four Centimeters, Three Times Over
Set the five lengths side by side and a pattern appears that no single listing would show. TraVisonyx publishes 24cm and 9.46inch as one length. ZMOIVOK publishes 9.45 inches and ZQLZYC publishes 9.45 inches, and 9.45 inches is 24.0 centimeters. Three sellers who share nothing else are selling a tool cut to the same metric length.
The widths line up too. TraVisonyx gives 2.3cm with 0.9inch, Addyno gives 0.9 inches, ZMOIVOK gives 0.91 inches and ZQLZYC gives 1 inch, so four of the five heads sit within a tenth of an inch of each other. Patelai is the outlier at 3.5 cm, or 1.4 inches, and it is also the only two piece purchase here, so the head is wider by design rather than by accident.
Which One Fits Your Kitchen
A reinforced core and a deep reach. Addyno. The only entry here that labels its axes, at 10 inches long and 0.9 inches wide, confirmed by both fields and by a bullet. Five spatulas, a thicker internal core with strengthened connections, seamless silicone rated to 600 F, dishwasher safe.
Three colors and a stated core. TraVisonyx. The only listing publishing both units for both axes: 24cm with 9.46inch long and 2.3cm with 0.9inch wide. Three spatulas in red, black and purple, a stainless steel core, minus 40 C to 230 C, rinse gently or use a dishwasher.
A seamless one piece build. ZQLZYC. The only maker here publishing a thickness, in a bullet giving 9.45in by 1in by 0.1in. Three spatulas at 0.2 lb, an integrated head and handle stated to keep residue and moisture out, dishwasher or rinse. No temperature figure is published.
A non slip grip on a single scraper. ZMOIVOK. Its entry gives 9.45 by 0.91 inches, which its length field confirms at 9.44 while its width field reads 2.3. An ergonomic non slip handle and smooth edges for nonstick pans. No count, no core, no temperature figure and no weight is published.
Hanging on a hook between uses. Patelai. 28 by 3.5 cm, or 11 by 1.4 inches, stated in the entry, a bullet and both fields. Two spatulas at 0.26 lb with a stainless steel core, suspension holes in the handle ends, no seams or cracks, and minus 60 C to 250 C.
What We Could Not Verify
Everything above is read off each maker’s own listing text. These are the things those listings leave open, and this page does not fill them in.
- A thickness for Addyno, TraVisonyx or Patelai, none of which publishes one in its entry, its title or any bullet.
- How many spatulas the ZMOIVOK purchase contains, because no count appears anywhere on that listing.
- Whether the ZMOIVOK head is 0.91 inches or 2.3 of something, since its entry and its width field disagree in unit as well as figure.
- A weight for Addyno, TraVisonyx or ZMOIVOK, none of which publishes one for a spatula or for the set.
- A temperature figure for ZQLZYC or ZMOIVOK, both of which claim heat resistance in words and name no number.
- Whether the pieces in the Addyno, TraVisonyx or ZQLZYC sets differ from each other, since each publishes one measurement for the whole set.
