Lush Food & Drink

Explainer

How do you clean airtight snack canisters?

Wash the canister and lid in warm soapy water, remove and clean the silicone seal separately, and dry every part fully before reassembling, since trapped moisture in the gasket is what causes smells and mold in airtight lids.

By the Lush Editorial Team·Researched & Compared

You clean airtight snack canisters by washing the body and lid in warm soapy water, taking out the silicone seal and cleaning it separately, then drying every part completely before you put it back together. The seal is the part most people miss, and it is where trapped crumbs and moisture cause the stale smells and mold that make an airtight lid go off. Get the gasket clean and dry and the rest is easy. Our Best Airtight Snack Canisters compares five of them.

Start by emptying and rinsing

Tip out any leftover crumbs and brush or shake the canister clean before it gets near water, because snack debris like cracker dust and crumbs turns to a paste when wet and is harder to remove. A dry brush-out first saves you scrubbing stuck residue later, especially in the corners and around the base.

Then give the body a rinse in warm water. Most airtight canisters are plastic, glass or stainless steel, all of which rinse easily, and this first rinse loosens any oily film left by salty or buttery snacks so the wash goes faster. Do this soon after the canister is empty rather than letting residue sit and dry on.

Washing the body and lid

Wash the body and lid in warm water with a little dish soap and a soft sponge or bottle brush. A long-handled brush helps with tall, narrow canisters where your hand cannot reach the bottom. Avoid abrasive scourers on clear plastic or glass, since scratches cloud the finish and give crumbs somewhere to lodge.

Check whether yours is dishwasher safe before using the machine; many bodies are, but some lids with electronics or printed scales are hand wash only. Even dishwasher-safe lids usually clean better by hand because the clips and the seal groove hold water and food that a dishwasher spray can miss. When in doubt, hand wash the lid and machine wash the body.

The silicone seal is the key part

The silicone gasket that makes the lid airtight is the part that needs the most attention. Peel it out of its groove, because crumbs, moisture and oils collect under and behind it where you cannot see, and that hidden residue is the usual cause of a canister that smells stale or grows mold despite looking clean.

Wash the seal in warm soapy water, working into both sides, and if it has picked up a smell, soak it in a solution of warm water and a little baking soda or white vinegar for a while before rinsing. Also clean the empty groove in the lid where the seal sits. Then let both dry fully, since a seal refitted damp simply traps the moisture again.

Drying and reassembly

Drying is not an optional last step with airtight canisters, it is the step that prevents the problems. Any moisture sealed inside has nowhere to go, so it sits against the food or in the gasket and breeds smell and mold. Dry the body, lid, clips and seal with a towel, then leave them to air apart for a while to be sure.

Refit the silicone seal fully into its groove, pressing it in all the way round so there are no gaps, then store the canister with the lid off or loosely rested on top until you next fill it, so any last trace of moisture can escape. Only seal it shut once it is bone dry and you are putting food back in. That habit alone keeps an airtight canister fresh for years.

Mistakes that shorten a canister’s life

A few habits quietly ruin airtight canisters. Sealing them while still warm or damp traps moisture that breeds smell and mold, which is the most common complaint and entirely avoidable. Using abrasive scourers on clear plastic clouds the finish so it never looks clean again, and soaking some lids with electronics or batteries can damage them, so always check before submerging a smart lid.

Harsh solvents and very hot dishwasher cycles can also harden or shrink a silicone gasket over time, after which it no longer seals and the canister is airtight in name only. Treat the seal gently, replace it if your maker sells spares and it starts to perish, and the canister keeps working. A worn gasket, not a cracked body, is what usually ends an airtight canister’s useful life.

The short answer

To clean an airtight snack canister, empty and brush out the crumbs, rinse the body, then wash the body and lid in warm soapy water with a soft sponge or bottle brush, avoiding abrasive scourers that scratch clear finishes. The important extra step is to remove the silicone seal, wash it on both sides and clean the groove it sits in, since trapped crumbs and moisture there cause the stale smells and mold that spoil an airtight lid. Dry every part completely, refit the seal fully, and store the canister open or loosely covered until its next use so no moisture is sealed inside.

Common questions

How do you clean airtight snack canisters?

Empty and brush out the crumbs, rinse the body, then wash the body and lid in warm soapy water with a soft sponge or bottle brush. Remove the silicone seal and wash it separately along with its groove, then dry every part completely before reassembling. The seal and thorough drying are the steps that keep the canister fresh.

Why does the silicone seal need separate cleaning?

Because crumbs, moisture and oils collect under and behind the gasket where you cannot see them, and that hidden residue is the usual cause of a canister that smells stale or grows mold despite looking clean. Peeling the seal out to wash both sides, and cleaning the groove it sits in, removes the trapped debris that a surface wipe misses.

How do I get a stale smell out of a snack canister?

Clean it fully, paying attention to the seal, then soak the gasket in warm water with a little baking soda or white vinegar before rinsing and drying. Letting the open canister air dry in sunlight can also help. Most stale smells come from moisture trapped in the seal, so getting it clean and bone dry usually clears them.

Are airtight snack canisters dishwasher safe?

Many bodies are, but lids with printed scales or any electronics are often hand wash only, and even dishwasher-safe lids clean better by hand because the clips and seal groove trap water and food. Check the maker's note, and when in doubt hand wash the lid and seal while machine washing the body on the top rack.

Why is drying so important for airtight canisters?

Because the airtight seal traps whatever is inside, including moisture. Any water left in the body or gasket has nowhere to escape, so it sits against the food and breeds smells and mold. Drying every part fully, refitting the seal, and storing the canister open or loosely covered until next use prevents nearly all of those problems.

Ready to compare actual models?

Our buying guide puts five products side by side on the numbers their makers publish.

More questions about storage