Lush Food & Drink

Explainer

How do you clean splatter screen lids?

Wash a splatter screen straight after use in hot soapy water, scrubbing both sides of the mesh with a brush to clear the grease that clings to it, then rinse and dry. For stubborn baked-on grease, soak it in hot soapy water or a baking-soda solution first. Many are dishwasher safe too.

By the Lush Editorial Team·Researched & Compared

You clean a splatter screen (a mesh screen you lay over a pan to stop grease and oil splattering) by washing it in hot soapy water straight after use, scrubbing both sides of the mesh with a brush to clear the grease that clings to and through it, then rinsing and drying it. Because the screen catches spattering hot grease and oil while you fry, it gets coated in greasy residue on both sides and in the fine mesh holes, so the key is to cut that grease: wash it in hot (the heat helps dissolve grease) soapy water, using a sponge or, better, a brush to get into the mesh from both sides and remove the grease trapped in it, then rinse well and dry it (to prevent rust on metal mesh). Do this soon after use, while the grease is still soft, as it is much easier to remove before it cools and hardens or bakes on. For stubborn, baked-on grease, soak the screen first in hot soapy water (or a baking-soda or vinegar solution) to loosen it, then scrub. Many splatter screens are also dishwasher safe, which helps. So cleaning a splatter screen is mainly scrubbing the grease out of the mesh with hot soapy water, done promptly. Our Best Splatter Screen Lids compares five of them.

Why they need good cleaning

A splatter screen is a flat mesh (usually fine metal mesh) with a handle that you place over a frying pan to let steam out while blocking the spattering grease and oil, keeping your stovetop and surroundings clean. Because its whole job is to catch flying hot grease and oil, the screen gets coated in greasy residue, on both sides and, crucially, in and through the fine mesh holes, so it accumulates grease that needs proper cleaning. If not cleaned well, the grease builds up, goes rancid or sticky, clogs the mesh, and the screen becomes grimy and less effective.

So a splatter screen needs thorough grease-cutting cleaning, more than a quick rinse, because grease clings to the mesh and gets into the holes. The fine mesh is the challenge: grease lodges in and passes through the small holes, so you have to clean both faces and work the grease out of the mesh. Understanding that the screen’s job (catching grease) means it gets greasy all over the mesh explains why cleaning focuses on cutting and scrubbing out that grease with hot soapy water. So the cleaning is about removing grease from the mesh effectively, done promptly before it hardens, which the next sections cover. So it is a greasy item to clean, but manageable with the right approach.

Wash in hot soapy water, scrubbing the mesh

The main method is to wash the splatter screen in hot soapy water, scrubbing both sides of the mesh to remove the grease. Use hot water, as the heat helps dissolve and loosen the grease, with dish soap (a grease-cutting detergent), and scrub the mesh with a sponge or, better, a dish brush or scrubbing brush that can work into the mesh. Clean both faces of the screen, because grease coats both sides and sits in the holes, so scrubbing from both sides (and through the mesh) clears the grease trapped in it. Work the brush over all the mesh and around the frame/edge where grease also collects.

Then rinse the screen thoroughly under hot water to wash away the loosened grease and soap, making sure no greasy residue remains in the mesh, and dry it (important for a metal mesh, to prevent rust, and to keep it ready to use). A brush is particularly helpful because the fine mesh holds grease that a flat sponge struggles to reach, so scrubbing with a brush is the key to getting a splatter screen properly clean. So washing in hot soapy water and scrubbing both sides of the mesh with a brush, then rinsing and drying, is the core of cleaning a splatter screen, cutting and removing the grease that clings to and through the mesh, which is the main cleaning task.

Prompt cleaning and stubborn grease

Cleaning the splatter screen promptly, soon after use while the grease is still warm and soft, makes it far easier, because fresh grease washes and scrubs off more readily than grease that has cooled and hardened or baked onto the mesh. So clean the screen after frying, before the grease sets, which keeps it a quick job. Leaving a greasy screen means the grease hardens and clogs the mesh, making it much harder to clean later, so promptness is key.

For stubborn or baked-on grease (if the screen was not cleaned promptly, or grease has built up over time), soak it first to loosen the grease: soak the screen in hot soapy water for a while, or in a solution of hot water with baking soda (or a little vinegar), to soften and loosen the hardened grease, then scrub it off with a brush. Repeated soaking and scrubbing deals with heavy build-up. Many splatter screens are also dishwasher safe, so putting it in the dishwasher is an easy option for cleaning (check the maker’s guidance), the dishwasher’s hot water and detergent help cut the grease, though hand scrubbing may still be needed for heavy grease in the mesh. So prompt cleaning keeps it easy, and soaking (or the dishwasher) handles stubborn grease, which with the hot-soapy-water scrubbing covers cleaning a splatter screen in all cases.

Keeping it clean and the routine

To keep a splatter screen easy to clean, wash it after each use (or at least soon after) while the grease is soft, scrub both sides of the mesh with a brush in hot soapy water, rinse and dry it, so grease does not build up and harden in the mesh over time. Regular cleaning prevents the heavy, baked-on grease that makes cleaning hard and the screen grimy. Dry it well (especially metal mesh) to prevent rust, and store it clean. If you use the dishwasher, that is fine for routine cleaning if the screen is dishwasher safe.

So the full method is: wash the splatter screen in hot soapy water straight after use, scrubbing both sides of the mesh with a brush to cut and remove the grease (and cleaning the frame), rinse thoroughly, and dry it, soaking first in hot soapy water or a baking-soda solution for any stubborn baked-on grease, and using the dishwasher if the screen is dishwasher safe. Clean it promptly to keep it easy. Done this way, a splatter screen stays clean, grease-free and effective, with its mesh clear. So cleaning a splatter screen is mainly a matter of scrubbing the grease out of the mesh with hot soapy water and a brush, done promptly before the grease hardens, with soaking for stubborn grease, which keeps this grease-catching tool clean and working well.

The short answer

Clean a splatter screen by washing it in hot soapy water straight after use, scrubbing both sides of the mesh with a brush to clear the grease that clings to and through it, then rinsing and drying it. Because the screen’s job is to catch spattering hot grease and oil, it gets coated in greasy residue on both sides and in the fine mesh holes, so the key is to cut that grease: use hot water (the heat dissolves grease) with dish soap, and scrub the mesh from both sides with a dish brush (better than a flat sponge for getting into the holes), also cleaning the frame, then rinse thoroughly so no grease remains and dry it (important for metal mesh, to prevent rust). Do this promptly, while the grease is still warm and soft, since it is much easier to remove before it cools and hardens or bakes onto the mesh. For stubborn, baked-on grease, soak the screen first in hot soapy water or a baking-soda (or vinegar) solution to loosen it, then scrub. Many splatter screens are also dishwasher safe, so the dishwasher is an easy option for routine cleaning (check the maker’s guidance), though heavy grease in the mesh may still need hand scrubbing. So cleaning a splatter screen is mainly scrubbing the grease out of the mesh with hot soapy water and a brush, done promptly, with soaking for stubborn grease.

Common questions

How do you clean a splatter screen?

Wash it in hot soapy water straight after use, scrubbing both sides of the mesh with a brush to clear the grease that clings to and through it, then rinse thoroughly and dry it (important for metal mesh, to prevent rust). Use hot water since the heat dissolves grease, and a brush rather than a flat sponge to get into the mesh holes, and clean the frame too. For stubborn baked-on grease, soak it first in hot soapy water or a baking-soda solution. Many are also dishwasher safe.

Why are splatter screens greasy and need good cleaning?

Because their whole job is to catch spattering hot grease and oil while you fry, so the mesh gets coated in greasy residue on both sides and, crucially, in and through the fine holes. This grease clings and, if not cleaned well, builds up, goes rancid or sticky, clogs the mesh and makes the screen grimy and less effective. So a splatter screen needs thorough grease-cutting cleaning, scrubbing the grease out of the mesh, rather than just a quick rinse, which is why hot soapy water and a brush are used.

How do you get grease out of the mesh of a splatter screen?

Wash it in hot soapy water, scrubbing both sides of the mesh with a dish brush or scrubbing brush, which gets into the fine holes better than a flat sponge, so you remove the grease coating both faces and trapped in the holes. The hot water and grease-cutting dish soap help dissolve the grease as you scrub. Then rinse thoroughly so no greasy residue remains in the mesh, and dry it. For grease lodged stubbornly in the mesh, soak the screen first to loosen it, then scrub again.

How do you remove baked-on grease from a splatter screen?

Soak it first to loosen the hardened grease: soak the screen in hot soapy water for a while, or in a solution of hot water with baking soda (or a little vinegar), to soften the baked-on grease, then scrub it off with a brush, repeating if needed for heavy build-up. The dishwasher can also help if the screen is dishwasher safe. Cleaning the screen promptly after use, before grease hardens, avoids this in the first place, but soaking plus scrubbing deals with stubborn, baked-on grease when it occurs.

Can you put a splatter screen in the dishwasher?

Often yes, many splatter screens are dishwasher safe, so putting it in the dishwasher is an easy option for cleaning, the hot water and detergent help cut the grease, check the maker's guidance to be sure. However, heavy or baked-on grease trapped in the fine mesh may still need hand scrubbing with a brush even after a dishwasher cycle. So the dishwasher works well for routine cleaning of a dishwasher-safe screen, with hand washing and scrubbing in hot soapy water as the reliable method, especially for greasy mesh.

Ready to compare actual models?

Our buying guide puts five products side by side on the numbers their makers publish.

More questions about cookware