Lush Food & Drink

Explainer

How to clean a cast iron grill pan after cooking

Scrape along the channels while the pan is warm, never across them, and never soak it. A sponge rides over the ribs and misses the burnt marinade underneath.

By the Lush Editorial Team·Researched & Compared

Clean a grill pan along its channels, while it is still warm, with a scraper rather than a sponge. The ribs are the whole problem: a round sponge rides across the top of them and never reaches the bottom of the grooves, so the burnt marinade that actually makes a grill pan unpleasant to use is exactly the part a normal wash misses. Our Best Grill Pans compares the published figures of five of them.

Warm matters more here than on a flat pan. Fat and sugar from a marinade set hard in the channels as they cool, and a grill pan left until the morning needs soaking, which is the one thing you should not do to it. Give it a minute or two off the heat, until you could rest a hand on the outside, then deal with it.

The routine

Tip the collected fat out of the channels first, into a jar rather than down the sink, because drained fat is the point of the pan and there is usually more of it than you expect. Then run hot water over the pan and push a stiff plastic scraper along each channel from one end to the other. Along, not across. A scraper worked across the ribs skips over the gaps; worked along them it acts like a plow and brings everything out at the end.

A narrow scraper or one with a pointed corner is worth having for this, because a wide straight edge cannot reach into a groove. Our Best Cast Iron Pan Scrapers for Cast Iron Beginners compares the published figures of five of them.

For anything the scraper will not move, put a shallow layer of water in the pan and simmer it for a few minutes. Deglazing lifts carbonized marinade out of the channels in sheets and is far gentler than scrubbing. Scrape while the water is still in the pan, then pour it out.

Dry it with heat, not with a towel. A grill pan has more surface area than a flat pan of the same size and every channel holds water along its length, so a towel leaves it wet in the grooves. Thirty seconds on a low burner clears it. Then, if the pan is bare cast iron, put a few drops of oil on a paper towel and wipe along the channels while the pan is warm until the surface looks matte.

What not to do

Do not soak it. Standing water in the channels of a cast iron grill pan rusts them from the bottom up, and the rust is invisible until the pan starts sticking. Do not put it in a dishwasher. And do not attack the ribs with steel wool if the pan is coated, because the rib tops are where the coating is thinnest and where every utensil has already been scraping.

Coarse salt is the safe abrasive. A spoonful of kosher salt on a folded paper towel, run along each channel on a warm dry pan, cuts baked-on residue without a metal pad. It is slower than steel wool and it does not take anything off the pan.

Why coated and cast iron grill pans need different hands

Many grill pans are pressed aluminum with a nonstick coating, and ours are published at weights such as 1 lb, 2.2 lb and 2.9 lb, which is a clue to what they are: thin pans not built for a hard preheat. On those, use plastic or wooden tools only, wash once cool with a soft brush, and expect the rib tops to wear first. There is nothing to re-season, so when the coating goes the pan is done.

A cast iron grill pan is the opposite. It takes a metal scraper, it takes salt, it takes as much force as you want to give it, and the surface rebuilds when you oil it. The heavier pans in our guide are published at 3.77 lb and above, and that mass is what lets them char food properly in the first place. Our guide on how to clean a cast iron skillet after use covers the shared routine; the channels are the extra work.

Stains, smoke and smell

A grill pan goes dark and uneven with use and that is not dirt. The dark bands across the rib tops are where the metal has been hottest, and on bare cast iron that is seasoning forming exactly where you want it. Do not scrub it back to gray in pursuit of an even color.

Smoke during cooking usually means old fat in the channels rather than a problem with what you are cooking now, which is a useful signal: if the pan smokes before the food does, it needed a better clean last time. Smells from fish or spice come out with a water simmer, and a faint memory of the last thing cooked is normal in an iron pan and disappears on the next hot cook.

Common questions

Why can I never get a grill pan properly clean?

Because a sponge crosses the ribs instead of entering the channels. Push a stiff scraper along each groove from one end to the other, which plows the residue out, and simmer a shallow layer of water in the pan for anything that will not move.

Can I soak a cast iron grill pan?

No. Every channel holds standing water along its length, so soaking rusts the grooves from the bottom up, and the rust is hidden until the pan starts sticking. Scrape it warm, then dry it on a burner rather than with a towel.

Is steel wool safe on a grill pan?

On bare cast iron, yes, and anything you scratch is covered by the next oil wipe. On a coated grill pan, no: the rib tops carry the thinnest coating and take all the utensil contact already, so a metal pad finishes them off.

My grill pan smokes as soon as it heats up. What is wrong?

Old fat left in the channels. If the pan smokes before the food does, the previous clean missed the grooves. Simmer water in it, scrape along each channel, then dry with heat and wipe a trace of oil along the grooves.

Should I scrub the dark marks off the ribs?

No. The dark bands across the rib tops are where the metal gets hottest, and on bare cast iron that is seasoning forming where you most want it. Chasing an even color scrubs away the part of the surface that makes food release.

Ready to compare actual models?

Our buying guides put five products side by side on the numbers their makers publish.

More questions about grill pans