Lush Food & Drink

Explainer

How to season a cast iron wok

A wok is seasoned on the burner, not in the oven, because you rotate the bowl through the flame. Carbon steel needs its shipping film scrubbed off and blueing first.

By the Lush Editorial Team·Researched & Compared

A wok is the one pan you season on the hob rather than in the oven, and that is the reverse of the advice for a flat griddle. The reason is shape. A wok is a bowl, so you can tilt and rotate it through a single flame and bring every part of the surface through the heat in turn, which an oven cannot do any better. It also usually will not fit in a domestic oven at all: the bowls in our guide are published at up to 14 inches across. Our Best Woks compares the published figures of five of them.

Before anything else, find out what your wok is made of, because the first step differs. Cast iron woks are seasoned the same way as any other cast iron: clean, thin oil, heat. Carbon steel woks, which are the more common type sold for home use, arrive with a factory anti-rust coating that has to be scrubbed off, and they are usually blued before oiling. Non-stick and electric woks are not seasoned at all.

Stripping a new carbon steel wok

New carbon steel is shipped under a film of oil or lacquer to stop it rusting in transit, and seasoning on top of that film gives you a layer bonded to the film rather than to the metal. It flakes within a week. Scrub the whole wok, inside and out, with hot water, dish soap and a scouring pad until the surface squeaks and the water stops beading. This is the only time you will ever use soap and a harsh pad on it, so be thorough.

Then dry it on the burner. A bare steel wok will begin to rust while you are looking at it, so go straight from the sink to the heat.

Blueing, which is the step people skip

With the wok dry and empty, put it on your highest burner and leave it there. The metal will change color: first a straw gold, then a blue-gray that spreads outward from the hot spot. Tilt and rotate the wok so the color works its way up the sides and all the way to the rim, which takes several minutes and some patience with the handle.

That blue-gray is an oxide layer formed in the steel, and it is what the oil layer grips. A wok that has been blued takes seasoning in one or two rounds. A wok that has not needs many more and loses them faster. Cast iron woks do not need this step, because cast iron already has a surface the oil can bond to.

The oil rounds

Take the wok off the heat for a moment, add half a teaspoon of a neutral high smoke point oil, and spread it over the whole interior with a wad of paper towel held in tongs. Then wipe it back out until the metal looks matte. The thin rule matters more in a wok than anywhere else, because the sloped sides drain oil toward the base: whatever you leave on the walls ends up pooled in the bottom, where it stays soft and goes sticky.

Put it back on high heat until it stops smoking, rotating it through the flame so the walls and rim get their turn, then repeat. Three or four rounds give a usable dark surface. Unlike a skillet, a wok is mostly seasoned by cooking: a few weeks of hot stir frying with oil will do more than any number of empty rounds, so there is no reason to chase a perfect finish on day one.

Two traditional finishing steps genuinely help. Frying a handful of aromatics such as scallion and ginger in the first oil round helps even out the layer and takes the metallic edge off a new wok. And the first thing you cook should be fatty rather than acidic, so no tomato and no vinegar sauces for the first week.

Keeping it

Rinse with hot water and a soft brush while the wok is still warm, no soap after the first strip, then dry it on the burner every single time. Carbon steel is thinner than cast iron and rusts faster, so the heat dry is not optional. Wipe a trace of oil on the interior while it is warm. Hang it rather than nesting it inside another pan, because a wok stored under a weight traps moisture at the contact point.

Thin walls are also why a wok is manageable despite its size. The bowls in our guide are published at weights such as 4.2 lb and 5 lb, against far heavier cast iron pans of a similar diameter, and that lightness is the point: a stir fry is tossed, and a wok you cannot lift with one hand is the wrong tool. A cast iron wok trades that away for heat retention.

Electric woks are not seasoned

An electric wok has a coated bowl and a fixed element, and oil baked onto the coating will not bond. It is also not built for the heat a seasoning round needs: the models in our guide are rated at 1500 and 1800 watts, which is steady cooking power rather than the fierce burner heat that blues steel. Our Best Electric Woks compares the published figures of five of them.

If the bowl detaches, wash it by hand and keep metal utensils off it. If it does not, wipe it out once cool. Either way the surface is a consumable layer, where a seasoned steel wok is the opposite: it is the pan that gets better the harder you cook in it.

Common questions

Should I season a wok in the oven or on the hob?

On the hob. A wok is a bowl, so you tilt and rotate it to bring each part of the surface through the flame, and most woks are too wide to fit in a domestic oven anyway. Flat cast iron is the opposite case, where the oven is what gets an even layer.

Do I have to scrub a new carbon steel wok before seasoning it?

Yes, thoroughly. New carbon steel ships under an anti-rust film, and a seasoning layer built on top of that film is bonded to the film rather than the steel, so it peels within days. Scrub with soap and a scouring pad until the water stops beading, then dry on the burner at once.

What is blueing and do I need to do it?

Blueing is heating the bare steel until it turns blue-gray, which forms an oxide layer that oil grips. Carbon steel woks benefit from it enormously and take seasoning in one or two rounds afterwards. Cast iron woks do not need it, because cast iron already has a surface oil can bond to.

Why does oil pool in the bottom of my wok when I season it?

Because the sides slope, so anything you leave on the walls runs down. That pooled oil cannot all convert and sets as a sticky patch in the base. Wipe the interior back until it looks matte before the wok goes on the heat.

Can I season an electric wok?

No. The bowl is coated and baked-on oil will not bond to it, and an electric element does not reach the temperature that blues steel. Hand wash a detachable bowl, keep metal tools off the surface, and treat the coating as a part that wears.

Ready to compare actual models?

Our buying guides put five products side by side on the numbers their makers publish.

More questions about woks