Lush Food & Drink

Explainer

Is a titanium cutting board bad for knives?

A titanium cutting surface is hard enough to dull and mark a knife edge, and the titanium boards in this site's comparison pair that surface with a softer plastic side for produce.

By the Lush Editorial Team·Researched & Compared

Yes, a titanium cutting surface is hard on a knife edge. Titanium is harder than the steel of most kitchen blades, so a sharp edge that meets the metal face repeatedly rolls, dulls and picks up scratches, and the board itself shows knife marks. The titanium boards in this site’s comparison handle that by giving the metal face one job and a softer plastic face another.

The Best Cutting Boards for Plastic and Titanium Sets guide compares five boards, three all plastic and two with a titanium side. The makers’ published descriptions are the only source used here. Nobody at Lush has used any of these boards, so what follows is what the makers state and what follows from it.

Why a metal face dulls an edge

A knife edge is thin steel. When it strikes a surface harder than itself, the apex bends and abrades instead of sinking in. Wood and soft plastic give slightly under the edge, which is why butchers block and polyethylene are traditional cutting surfaces. Titanium sits on the hard side of that line, so a titanium face acts more like a honing steel than a cutting surface: it straightens and wears the edge rather than cushioning it.

Neither titanium board in the comparison makes a hardness claim in its published features. The Sumzzz board describes its surface as smooth and durable and less likely to retain residue than some traditional materials. The Pexucalm board describes a matte texture finish that conceals minor knife marks and scratches. Both statements are about the board’s appearance, not about the knife, and neither maker publishes a hardness figure or a claim that the metal face is kind to edges.

What the two titanium makers actually state

The Sumzzz Titanium Cutting Board for Kitchen, Pure Titanium/PP, lists a 16 by 11 inch size in its title and a 16 by 11 inch size in its text, with a built-in juice groove and a garlic grinding area. Its features describe a double-sided board, one side for meat and one for fruits and vegetables, and a non-porous titanium surface that helps reduce absorption of liquids, odors and stains. The maker does not publish a weight.

The Pexucalm Double-Sided Titanium Cutting Board for Kitchen measures 15.4 by 10.4 inches, and the maker publishes a height of 0.5 inches. Its features are the most direct on the knife question: the titanium side is intended for raw meat and seafood, and the flip side is wheat straw PP, described as a softer material that effectively protects knife edges from rolling. That is the maker’s own split, metal for raw protein, soft plastic for produce. The maker does not publish a weight.

The softer side is where the knife work belongs

Read the Pexucalm description as an instruction. The titanium face is for raw meat and seafood, where a quick rinse matters and slicing is light. The wheat straw PP face is for chopping vegetables and fruits, and the maker states that this softer material protects knife edges from rolling. A cook who does the bulk of the chopping on the plastic face and reserves the metal face for protein keeps the edge away from the hardest surface in the kitchen.

The all plastic boards in the comparison show what a dedicated cutting surface looks like. The THETCHRY set gives three sizes, with a large board at 15 by 10 inches, a medium at 11 by 8 inches and a small at 9 by 6 inches, and the maker states a weight of 2.3 pounds. The GORILLA GRIP set lists a largest board at 16 by 11.2 inches, a medium at 13.8 by 9.6 inches and a small at 11.8 by 8 inches, each 0.37 inches thick, with a combined weight of 4.25 pounds. The Empune set publishes an extra large board at 17.0 by 11.8 by 0.4 inches.

Scratches, odor and what the metal face is good for

A titanium face does answer two common complaints about plastic and wood. The Sumzzz maker states that the non-porous titanium surface helps reduce absorption of liquids, odors and stains. The Pexucalm maker states that the titanium surface has natural non-stick properties, so grease and meat juices rinse off more easily than on plastic, and that it resists residue better than aged wood. Those are cleaning claims, and they are the reason a titanium board appeals for raw meat.

The trade is visible on the surface. The Pexucalm maker states that the matte texture finish helps conceal minor knife marks and scratches, which acknowledges that knife marks happen. The Sumzzz maker describes a smooth surface less likely to retain residue than some traditional materials. Neither maker claims the surface stays unmarked under heavy chopping, and neither publishes a figure for scratch resistance.

A practical way to use one board

Treat a double-sided titanium board as two boards in one. Keep the metal face for raw meat and seafood, where the non-porous surface and easy rinse do the most work, and do the knife heavy chopping on the plastic face. The Pexucalm board adds a deep juice groove and a garlic grinder zone on the wheat straw side, and the Sumzzz board lists a juice groove and a garlic grinding area, so the produce side is set up for wet prep anyway.

If most of your cutting is vegetables, fruit and herbs, an all plastic board puts the whole surface on the soft side of the comparison. The THETCHRY, GORILLA GRIP and Empune sets each publish their sizes and, for two of them, weights, and each is described by its maker as dishwasher safe. A titanium board earns its place for raw protein and easy cleaning, not as the surface you chop on all evening.

Common questions

Does titanium dull a knife faster than plastic?

Titanium is harder than the steel edge of a kitchen knife, so the edge wears against it rather than sinking in. Soft plastic gives slightly under the edge. The Pexucalm maker states that its wheat straw PP side is a softer material that protects knife edges from rolling, which is the maker's own reason to chop on the plastic face.

Can I sharpen a knife and then use a titanium board?

You can, but the edge will not hold as long on a metal face. Reserve the titanium side for raw meat and seafood, where slicing is light, and do heavy chopping on the plastic side. Neither titanium maker in this site's comparison publishes a hardness figure or a claim that the metal face preserves an edge.

Do the titanium boards scratch?

The Pexucalm maker states that its matte texture finish helps conceal minor knife marks and scratches, which indicates that marks occur. The Sumzzz maker describes a smooth surface less likely to retain residue than some traditional materials. Neither maker publishes a scratch resistance figure.

Are titanium cutting boards better for raw meat?

The makers argue so on cleaning grounds. Sumzzz states that its non-porous titanium surface helps reduce absorption of liquids, odors and stains. Pexucalm states that titanium has natural non-stick properties, so grease and meat juices rinse off more easily than on plastic. Both makers direct the metal face to raw meat and seafood.

What sizes do the titanium boards come in?

The Sumzzz board is listed at 16 by 11 inches in its title and its text. The Pexucalm board measures 15.4 by 10.4 inches, with a published height of 0.5 inches. Neither maker publishes a weight for its board.

Should I use one board for everything?

A double-sided titanium board lets you separate raw meat from produce without a second board. Use the metal face for meat and seafood and the plastic face for vegetables and fruit, which is the split both makers describe. For a kitchen where most cutting is produce, an all plastic board keeps the whole surface soft.

Ready to compare actual models?

Our buying guide puts five products side by side on the numbers their makers publish.

More questions about cutting boards