Lush Food & Drink

Explainer

Is cutting board oil the same as mineral oil?

No. Cutting board oil is a general label for a family of food safe oils, and mineral oil is one specific oil that often carries that label.

By the Lush Editorial Team·Researched & Compared

No. Cutting board oil is a general label for any food safe oil sold to treat wood, and mineral oil is one specific oil that is often sold under that label. The two terms overlap rather than name two different things, and neither one applies to the plastic and titanium boards compared in Best Cutting Boards for Plastic and Titanium Sets.

What the two labels actually mean

Cutting board oil is not a fixed recipe. It is a marketing and retail category for oils intended to soak into wood, and makers blend or bottle different base oils under it. Mineral oil is a specific refined petroleum oil, colorless and odorless, that is sold both as a laxative and as a wood treatment. When a bottle says cutting board oil, the contents may be mineral oil, or a blend of mineral oil with plant oils or wax.

The practical result is that mineral oil is a cutting board oil, but not every cutting board oil is mineral oil. A bottle labeled only as cutting board oil tells you the intended use, not the ingredient. A bottle labeled mineral oil tells you the ingredient, and you then check whether it is food grade. Reading the ingredient list is the only way to know which one you are holding.

Why oiling exists at all

Oil is a wood treatment. It soaks into the grain, slows the movement of moisture in and out of the wood, and reduces the chance of the board splitting as it dries. It does nothing for plastic, and it does nothing for titanium. The boards in the guide are plastic and titanium, so the oil question does not apply to any of them.

GORILLA GRIP states this directly in its published features for the BPA-Free Reversible Kitchen Cutting Board set of 3: the boards need no oiling or special maintenance. The set includes three boards, the largest 16 x 11.2 in, the medium 13.8 x 9.6 in and the small 11.8 x 8 in, each .37 in thick, with a combined weight of 4.25 lbs. The maker’s stated care route is the dishwasher.

THETCHRY makes a similar point in a different way for its Plastic Cutting Board Set of 3. The published features describe food grade plastic that will not bend or break after repeated washing, and the stated cleaning method is the dishwasher or hand washing with soap. The set lists sizes of 15 x 10 in, 11 x 8 in and 9 x 6 in, and the maker states a weight of 2.3 pounds in the text.

What the plastic boards in the guide say about care

Empune publishes dimensions for its Extra Large Cutting Boards set of 3 rather than care claims about oil. The extra large board is listed at 17.0 x 11.8 x 0.4 in, the large at 14.0 x 9.5 x 0.35 in and the medium at 11.4 x 7.8 x 0.35 in. The stated cleaning method is a rinse in warm water or the dishwasher. The maker does not publish any instruction to oil the boards, and the material is high density plastic.

Across the three plastic sets, the pattern is the same. The makers describe a nonporous or high density surface, a dishwasher safe construction, and no oiling step. That follows from the material: a plastic board has no grain to fill, so an oil has nothing to soak into. Wiping oil onto a plastic board leaves a film on the surface, which is the opposite of what the makers describe as easy cleaning.

What the titanium boards say about care

The two titanium picks describe rinsing and wiping, not oiling. Sumzzz lists its Titanium Cutting Board at 16 x 11 in in the text, with a nonporous titanium surface that the maker states helps reduce absorption of liquids, odors and stains. The stated cleaning method is a rinse with water on both sides, and the board has a built in hanging hole for drying.

Pexucalm lists its Double-Sided Titanium Cutting Board at 15.4 x 10.4 in, with a titanium side for raw meat and seafood and a wheat straw PP side for vegetables and fruit. The maker states that the titanium surface has natural non-stick properties so grease and juices rinse off, and that a quick wipe with a dishcloth is enough. For the wheat straw side the maker states a prompt rinse. Neither side is described as needing oil.

So the answer holds for every board in the guide. None of the five picks is wood, and none of the makers publishes an oiling instruction. If you are choosing among these boards, the oil question drops out entirely.

If you already own a wood board

The oil question matters for wood, and that is where the two labels get confused. A wood board benefits from a food safe oil that soaks in, and mineral oil is the common choice because it is colorless, odorless and does not turn rancid. Blended cutting board oils usually combine mineral oil with a plant oil or a wax, which changes how the board feels but not the basic job.

This site has not compared wood boards, and the guide cited here covers plastic and titanium sets only. So there is no published figure on this site for how much oil a wood board takes, how often it should be applied, or how the two product types differ in absorbency. Those are questions for a wood board guide, not this one.

What can be said without a figure is the distinction itself. Cutting board oil names a use. Mineral oil names an ingredient. If you want mineral oil, buy a bottle that says mineral oil and states it is food grade. If you want a blended treatment, buy a bottle that lists its ingredients. Either way, check the label rather than the front of the bottle.

The short version

Mineral oil is one kind of cutting board oil, so the names are not synonyms and not opposites. For the plastic and titanium boards in the cited guide, no oil of either kind is called for. GORILLA GRIP states no oiling is required, and the other makers describe rinsing, wiping or dishwashing. The oil question belongs to wood, which this site has not compared.

Common questions

Do I need to oil a plastic cutting board?

No. The plastic sets in the cited guide are described as nonporous or high density, and the makers state dishwasher or hand washing as the care method. GORILLA GRIP states that its boards need no oiling or special maintenance. A plastic board has no grain for oil to soak into, so oil would sit on the surface.

Do I need to oil a titanium cutting board?

No. Sumzzz states that its titanium surface is nonporous and rinses clean with water on both sides. Pexucalm states that the titanium side has natural non-stick properties and wipes clean with a dishcloth, and that the wheat straw side needs a prompt rinse. Neither maker publishes an oiling step.

Is food grade mineral oil the same as cutting board oil?

Not exactly. Food grade mineral oil is a specific ingredient. Cutting board oil is a label for a product intended to treat wood, and it may contain mineral oil, a blend of mineral oil with plant oils, or a wax blend. Read the ingredient list to see which one you have.

Which boards in the guide are wood?

None. The cited guide compares plastic sets from THETCHRY, GORILLA GRIP and Empune, and titanium boards from Sumzzz and Pexucalm. No wood or bamboo board appears on the fact sheet, so no pick in the guide carries an oiling instruction.

What sizes do the titanium boards come in?

Sumzzz lists its board at 16 x 11 in in the text, with a built in juice groove and garlic grinding area. Pexucalm lists its board at 15.4 x 10.4 in, with a titanium side for meat and seafood and a wheat straw PP side for vegetables and fruit. Neither maker publishes a weight.

Does this site publish oiling figures for wood boards?

No. This site has not compared wood boards, so it has no published figure for how much oil a wood board takes or how often to apply it. The guide cited here covers plastic and titanium sets only, and the makers of those boards publish no oiling instruction.

Ready to compare actual models?

Our buying guide puts five products side by side on the numbers their makers publish.

More questions about cutting boards