Explainer
Why do cutting boards have grooves?
A groove, or juice groove, is a channel cut near the edge of a board to catch liquid from what you are cutting so it does not run onto the counter.
By the Lush Editorial Team·Researched & Compared
A groove on a cutting board is a channel cut near the edge that catches liquid released during cutting, so juice from a roast, a tomato or a melon stays on the board instead of running onto the counter. Makers describe it as a juice groove, and on many boards it runs around the whole perimeter or along one side.
The groove does a second job on boards that are flipped for serving: it holds liquid away from the rim so the flat side can go to the table. What a groove does not do is make a board waterproof or keep it from sliding, which are separate features each maker handles differently.
What a groove actually catches
Liquid is the problem a groove solves. When you carve a roast or slice a ripe tomato, juice pools on the surface and reaches the edge within seconds. A channel set in from the edge intercepts that flow and holds it until you wipe or pour it out. The deeper and wider the channel, the more it holds before it overflows.
Makers vary in how they describe the channel. Empune states that all sides of its plastic cutting board are designed with a juice groove to catch liquids from flowing onto the counter, and the set comes in extra large at 17.0 x 11.8 x 0.4 inches, large at 14.0 x 9.5 x 0.35 inches and medium at 11.4 x 7.8 x 0.35 inches. GORILLA GRIP describes deep grooves that help catch messy juices on its set of three, with the largest board at 16 x 11.2 inches.
On wood and bamboo boards the groove is often paired with a second feature. Greener Chef lists a juice groove plus a pour spout on its 24 x 18 inch bamboo carving board, so captured drippings can be tipped out in one place rather than wiped across the surface. That combination is aimed at gravies and pan sauces made from what the roast releases.
Groove on one side, flat on the other
Many boards are reversible, with the groove on one face and a plain surface on the other. The grooved side handles wet work: meat, fruit, anything that releases liquid. The flat side gives more uninterrupted cutting area and works as a serving surface, because a channel running through a cheese or bread presentation is in the way.
Allsum states this directly: one side has deep juice grooves for catching liquids, the other is flat for more cutting space, on a board measuring 16 x 11 inches and 1 inch thick. Astercook describes each board in its three piece bamboo set as reversible, one side with deep grooves to catch juices and the other smooth for serving, with boards at 15 x 10, 12 x 8 and 9 x 6 inches.
FANICHI takes the idea further on its end grain board, which measures 17 x 13 inches and 1.5 inches thick. The front side has a carved juice groove to catch liquids from meat, fruit or vegetables, and the reverse side has built in compartments for holding diced vegetables, mashed garlic or herbs. The groove and the compartments are on opposite faces, so you choose which one faces up.
Grooves on plastic, titanium and composite boards
Plastic boards mold a groove into the surface during manufacture, so it costs nothing extra in weight or maintenance. The THETCHRY set of three, at 15 x 10 inches for the large board, does not list a juice groove among its published features; it lists anti slip feet on both sides and a reversible surface instead. That is worth knowing if liquid control is the reason you are shopping.
Titanium boards can carry a groove too. Sumzzz lists a built in juice groove and a garlic grinding area on its 16 x 11 inch board, alongside a non porous titanium surface that it states helps reduce absorption of liquids, odors and stains. Pexucalm puts the deep juice groove on the wheat straw side of its 15.4 x 10.4 inch double sided board, not the titanium side, and states that the groove traps liquids from tomatoes or steaks.
The pattern across these boards is that the groove goes where liquid is expected. On a board with two different faces, the maker usually puts the channel on the face used for wet ingredients and leaves the other face plain or fitted with something else. Our guide to Best Cutting Boards for Plastic and Titanium Sets compares these boards on the figures their makers publish.
Grooves on carving and meat boards
Carving is where a groove earns its place most clearly. A whole bird or a large roast releases a lot of liquid under the knife, and a board without a channel sends it across the counter and onto the floor. The channel also lets you collect drippings deliberately, which is why some carving boards add a pour spout at one corner.
Bevel & Bond states that the deep juice groove on its maple end grain board captures liquid runoff from large cuts, and that the 10 lb weight keeps the board planted under heavy pressure. The board measures 17 x 13 inches and 1.75 inches thick. Realgulf takes a different route on its 24 x 18 inch teak butcher block: it lists two flat reversible sides for separate zones rather than a groove, so liquid control there depends on wiping between tasks.
OXO lists an integrated drip catcher and easy pour corners on its plastic utility board, which measures 14.8 x 10.4 inches, rather than describing a continuous groove. The function is the same, holding liquid at the edge until you deal with it. Our guide to Best Meat Cutting Boards for Carving Roasts and Raw Prep sets out these boards side by side.
Grooves on wood and bamboo, and what they mean for care
A groove adds surface area and a place for moisture to sit, which matters on wood and bamboo. Makers of wooden boards generally pair the groove with instructions to hand wash and dry promptly, and to oil the board regularly. Liquid left standing in a channel is exactly what those instructions are meant to prevent.
ROYAL CRAFT WOOD states that each board in its three piece bamboo set has a deep juice groove along the edge to capture liquids from meats, fruits or vegetables, with boards at 15 x 10, 12 x 8 and 9 x 6 inches. Kikcoin lists built in deep juice grooves on its bamboo boards, the largest at 17 x 12 inches and 1 inch thick, and recommends hand washing. Allsum states plainly that its grooved board should be hand washed under running water and never placed in a dishwasher.
Freshware publishes sizes for its three bamboo boards, 13 x 9.5, 11 x 8.5 and 8 x 6 inches, and lists a hanging hole and knife friendly surface, but does not list a juice groove among its published features. If a groove is what you need, that set is not the one to choose on the maker’s own description. Our guide to Best Wooden Cutting Boards for Juice Grooves and Storage covers the boards that do publish one.
Storing a grooved board
A grooved board is slightly thicker at the rim than a plain one, and the channel holds water after washing, so it needs to dry upright rather than flat in a stack. That is where a rack comes in. SUNFICON publishes a rack measuring 4.92 x 5.7 x 8.47 inches with each divide 1.18 inches wide, sized for boards 0.85 to 1.1 inches thick.
KORRTFID publishes a compact rack with four slots of 1.0 inch width, and states it is not suitable for utensils thicker than 1.0 inches. LAEMYFYRE lists slots of 1.0 and 1.2 inches on a stand measuring 6.1 x 6.1 x 4 inches. Check your board’s published thickness against the slot width before buying, since a grooved board at the rim can be thicker than its stated figure. Our guide to Best Cutting Board Organizers for Thick and Thin Boards compares the racks on those published dimensions.
Common questions
Does a juice groove keep liquid from reaching the counter entirely?
No. A groove holds what it can until it fills or until you tip the board. Makers describe it as catching or trapping liquid, not sealing the edge. On a very wet job, such as a large roast, the channel buys you time to pour or wipe before anything reaches the counter.
Do all cutting boards have grooves?
No. Some makers do not list one at all. The THETCHRY plastic set and the Freshware bamboo set publish their sizes and other features but no juice groove. Others put the groove on one face only, leaving the reverse flat for serving or for more cutting area.
Is the groove on the top or the bottom of a reversible board?
It depends on the board. Allsum and Astercook put the groove on one side and a flat surface on the other. FANICHI puts a groove on the front and compartments on the back. Pexucalm puts the groove on the wheat straw side rather than the titanium side.
Does a groove make a wooden board harder to care for?
It gives moisture a place to collect, so makers of wooden boards generally ask for hand washing and prompt drying. Allsum states its grooved board should be hand washed and never placed in a dishwasher. Kikcoin recommends hand washing its grooved bamboo boards as well.
How thick is a grooved board, for storage purposes?
The maker's published thickness is the figure to use. Empune lists 0.4 inches for its extra large board, Allsum lists 1 inch, and Bevel & Bond lists 1.75 inches. A rack with 1.0 inch slots, such as the KORRTFID, will not take a board thicker than that.
Can I use the grooved side for serving?
You can, but the channel interrupts the surface. Makers that design for both jobs usually point you to the flat side for presentation. Astercook describes its boards as grooved on one side and smooth on the other for serving, and FANICHI uses its reverse face as a serving tray.
Ready to compare actual models?
Our buying guides put five products side by side on the numbers their makers publish.