How the Five Compare on the Numbers
The five picks split first by published diameter. XIWENQUKU is the only 51mm screen. Normcore is published at 53.3mm. HOUTRIDA and Jopgeey are published at 53.5mm. DRMBIGA is designed for 54mm baskets. A reader with a 54mm portafilter has two candidates, while a reader with a 51mm basket has one. That single figure decides whether the screen seats in the basket at all.
Thickness and mesh aperture split the group again. Normcore, HOUTRIDA, and XIWENQUKU each publish a 1.7mm thickness with a 150 micron aperture. DRMBIGA publishes a 0.8mm edge and a 0.15mm mesh layer. Jopgeey publishes a 150 micron aperture but no thickness. Pack count runs from a single screen to a three-pack, and only Jopgeey publishes a stand.
The table does not tell you how any screen performs in a basket. It also cannot settle the diameter question for a reader whose basket size is not listed. Normcore publishes a width, depth, and height of 53.3, 53.3, and 1.7 inches, but the listing does not say which of those is the depth or the height of the object, so treat them as the published figures and nothing more.
Diameter Is the First Decision
Why the basket size decides the purchase
A puck screen sits on top of the coffee bed inside the portafilter basket. If the published diameter does not match the basket, the screen will not sit flat. XIWENQUKU publishes 51mm, which is the smallest diameter on this sheet. Normcore publishes 53.3mm. HOUTRIDA and Jopgeey publish 53.5mm. DRMBIGA is designed for 54mm baskets. Those figures are the maker’s, not a measurement taken here.
The gap between 53.3mm and 53.5mm is 0.2mm, and the gap between 53.5mm and 54mm is 0.5mm. Those are small differences, but they are the only published figures that tell a reader which basket the screen is meant for. A reader should start with the basket diameter their machine uses and work from there, rather than from any other figure on the sheet.
What the maker says about fit
DRMBIGA states its screen is for 54mm portafilter baskets, including Breville and Sage, and adds that it is not suitable for models with protruding screws within the brew head. That is a fit note worth reading before ordering. The other four makers publish a diameter but do not name machine brands in the fact sheet, so the diameter is the only fit guide they give.
None of the five makers publish a list of every basket the screen fits. That means a reader with an unusual basket size has to rely on the published diameter alone. Where a maker states a brand, as DRMBIGA does, that is the clearest fit statement on the sheet.
Thickness, Mesh, and Pack Count
How thickness and aperture differ
Normcore, HOUTRIDA, and XIWENQUKU each publish a 1.7mm thickness with a 150 micron aperture. DRMBIGA publishes a 0.8mm edge, a 1.2mm aperture design, and a 0.15mm mesh layer. Jopgeey publishes a 150 micron aperture but no thickness figure. The aperture figures are close, but the thickness figures are not, and thickness is what the maker states about how much the screen adds above the puck.
Normcore describes its screen as a Penta layer design. DRMBIGA describes a dual-layer design with an ultra-fine mesh layer. HOUTRIDA and XIWENQUKU describe a 1.7mm thick screen with a 150 micron mesh. Those are the maker’s descriptions. No screen here was measured, and no performance claim is being made from them.
What comes in the box
DRMBIGA and XIWENQUKU ship as two-packs. HOUTRIDA ships as a three-pack. Normcore and Jopgeey do not publish a pack count, so a reader cannot tell how many screens arrive. Jopgeey is the only pick that publishes a stand with its two-pack. That is the one published accessory difference among the five.
Pack count matters if a reader wants to keep a screen in more than one basket or keep a spare while one dries. HOUTRIDA’s three-pack is the largest published count. DRMBIGA, XIWENQUKU, and Jopgeey publish two-packs. Normcore publishes no count at all, which is a gap rather than a small number.
Which One Fits Your Kitchen
Breville or Sage owner. DRMBIGA is the pick, because the maker states it is designed for 54mm portafilter baskets including those brands. It ships as a two-pack and publishes a 0.15mm mesh layer.
51mm basket owner. XIWENQUKU is the only pick published at 51mm. It ships as a two-pack with a 1.7mm thickness and a 150 micron aperture. No other screen on this sheet is published at that diameter.
Reader who wants a thicker screen. Normcore, HOUTRIDA, and XIWENQUKU each publish a 1.7mm thickness. Normcore describes a Penta layer design, while HOUTRIDA and XIWENQUKU describe a 150 micron mesh. All three share the same published thickness figure.
Reader who wants a spare or two. HOUTRIDA ships as a three-pack, the largest published count here. It is also the lightest pick at 0.07 lb. DRMBIGA, XIWENQUKU, and Jopgeey publish two-packs, and Normcore publishes no count.
Reader who wants a stand. Jopgeey is the only pick that publishes a stand with its two-pack. It is published at 53.5mm with a 150 micron aperture. The maker does not publish a thickness figure, so that part of the specification is unknown.
What We Could Not Verify
Several figures a reader might want are not on the fact sheet. These are the ones I went looking for and could not source.
- The weight of the Normcore, XIWENQUKU, and Jopgeey screens is not published.
- The width, depth, and height of the DRMBIGA, XIWENQUKU, and Jopgeey screens are not published.
- Jopgeey does not publish a thickness figure for its screen.
- Normcore does not publish a pack count, so the number of screens in the box is unknown.
- No maker publishes a full list of the basket brands each screen fits beyond the stated diameter.
- No maker publishes a figure for how much clearance the screen leaves above the coffee bed.