Explainer
How do you use a canning pot?
A canning pot works by holding jars above a heated water bath or under controlled pressure, and the maker's instructions for your specific model set the water level, the rack position and the processing time.
By the Lush Editorial Team·Researched & Compared
A canning pot holds jars on a rack so they sit off the bottom while the water around them heats, or, in a pressure model, so they sit in a sealed chamber under controlled pressure. You load the jars onto the rack, add water to the level the maker specifies, close the lid and run the cycle the maker’s instructions give for your food.
The five electric canners compared in Best Electric Canners for Pressure and Water Bath Preserving split into two groups: models that automate both pressure canning and water bath canning, and water bath pots that heat water to a set temperature. The steps below follow what each maker states about its own machine.
Water bath canning on a rack
Water bath canning suits high acid foods such as fruit, jams, jellies and pickles. The jars go on a rack that keeps them off the bottom of the pot so water circulates around each one. The McSunley Prep•N•Cook 21.5Qt Stainless Steel Water Bath Canner uses an easy lift jar rack designed to rest on the sides of the pot, so you load the jars and then lower them in. McSunley states that rack holds 7 one-quart jars, 9 one-pint jars or 12 half-pint jars.
The pot itself is 21.5 quarts, and McSunley builds it from stainless steel with a flat aluminum encapsulated base for gas, electric and smooth glass top ranges. The base spreads heat to limit hot spots, which the maker ties to uneven processing and jar breakage. A tempered glass lid lets you watch the water without lifting it, and the riveted handles are described as staying cool during cooking.
McSunley also notes the pot doubles as a large stock pot for soups, stews or boiling lobsters and corn. That is a cooking use, not a canning one, and it does not change the rack setup. For canning, the rack stays in and the jars stay off the bottom.
Electric water bath canners
An electric water bath canner replaces the stovetop burner with a heating element and a thermostat. The WantJoin Water Bath Canner is a 33 quart stainless steel electric canner rated at 1800 watts, with adjustable temperature from 86 to 212 degrees Fahrenheit and a timer from 30 to 180 minutes. WantJoin states the pot holds up to 11 one-quart jars and includes a steam rack, jar lifter, funnel and measuring tool.
To use it, you set the temperature and the timer rather than watching a flame. WantJoin describes a built in thermal sensor for even heating and a drain valve so you can empty the water without lifting the pot. The body is 304 stainless steel, and the maker lists the lid, knobs and bucket rack as heat resistant composite materials.
WantJoin describes the pot as multifunctional beyond canning, listing mulled wine, sous vide desserts and warming sauces. Those are cooking uses. For canning, the rack holds the jars and the thermostat holds the water at the temperature you select.
Pressure canning for low acid foods
Low acid foods such as meat, poultry, fish and vegetables need pressure, not a boiling water bath. The Presto 02144 12-Quart Digital Pressure Canner is a 12 quart electric model that Presto describes as the first digital canner automating both pressure canning and water bath canning. Presto states it meets USDA guidelines for pressure canning low acid foods and that no adjustments are needed for high altitudes.
The control knob selects the canning method and the time, and LED display icons light at each stage. Presto lists ten built in safety features, including a cover locking system and a sensor that holds the correct temperature. The canner measures 14 inches wide, 17 inches deep and 16 inches high, and weighs 20.5 pounds.
The NESCO NPC 9 Smart Electric Pressure Canner is a 9.5 quart stainless steel model with digital controls. NESCO states it regulates pressure and temperature automatically and includes a safety lock lid, an automatic float valve and a pressure regulation system that prevent opening under pressure. It ships with a canning rack and a steam rack. NESCO lists pressure cook, slow cook, steam and water bath among its modes.
Loading jars and closing the lid
Load jars onto the rack before the pot goes on the heat or before you start an electric cycle. Keep the jars upright and leave space between them so water can move. On the McSunley pot, the rack rests on the sides so you can fill it outside the pot and lower it in. On the electric models, the rack sits inside the inner pot and the jars go on top of it.
Close the lid the way the maker describes. Presto uses a cover locking system among its ten safety features, and NESCO uses a safety lock lid with an automatic float valve. Both makers state these prevent the lid from opening while the pot is under pressure. Never force a lid that will not turn.
The VEVOR Pressure Cooker is a 10 quart stovetop model with three pressure settings: manual release, 60 kPa and 100 kPa. VEVOR describes a gradual locking design with a rotating knob for one hand control, plus heat resistant side grips. VEVOR does not describe this model as a canner, so treat its pressure settings as cooking settings rather than canning settings.
After the cycle
Let the pot do what the maker specifies before you open it. On a pressure canner, the lid stays locked until pressure has dropped. Presto’s sensor holds temperature through the cycle, and NESCO’s float valve keeps the lid closed while pressure remains. Wait for the maker’s release point rather than opening early.
Emptying is easier on some models than others. WantJoin fits a drain valve so you can empty the water bath without heavy lifting. McSunley’s glass lid lets you check the water level without removing it. NESCO includes a removable condensation catcher for cleanup, and its inner pot is removable and nonstick.
For stovetop use, match the pot to your range. McSunley lists gas, electric and smooth glass top ranges. VEVOR lists induction, ceramic, electric and gas stovetops for its triple layer bottom. If your range is not on the maker’s list, the pot is not stated to work there.
What the makers do not publish
Processing times for specific foods are not in the product specifications for these canners. Presto and NESCO describe preset programs and guided interfaces, and WantJoin gives a timer range of 30 to 180 minutes, but none of the three publishes a chart of times per food in its product listing. Follow the recipe or extension service guidance for your food, then set the machine to match.
Water quantities are also not published as product specifications. The makers describe filling to a level and keeping jars off the bottom, not a measured volume. Use the fill line or instruction in your model’s manual. This site has not compared water levels across these canners.
For anyone who also brews coffee, the moka pots in Best Moka Pots for Stovetop and Electric Brewing follow a similar principle of a maker set water level. The Bialetti Moka Express instructs filling the boiler up to the safety valve, and the SHANGSKY electric pot warns against adding too much water above the safety valve. That is a fill limit, not a canning figure.
Common questions
Do I need a rack inside a canning pot?
Yes. The rack keeps jars off the bottom so water circulates around each one. McSunley states its easy lift rack holds 7 one-quart jars, 9 one-pint jars or 12 half-pint jars, and it rests on the sides of the pot so you can load jars and lower them in.
Can an electric canner do both water bath and pressure canning?
Some can. Presto describes its 02144 12-Quart Digital Pressure Canner as automating both pressure canning and water bath canning, and NESCO lists pressure cook, slow cook, steam and water bath among the modes on its NPC 9. Check the maker's mode list for your model before assuming either method.
How much water goes into a canning pot?
The makers do not publish a water volume as a product specification for these canners. They describe filling to a level and keeping jars off the bottom. Use the fill line or the instruction in your model's manual, and do not fill above any safety valve.
What temperature does an electric water bath canner reach?
WantJoin states its Water Bath Canner adjusts from 86 to 212 degrees Fahrenheit, with a timer from 30 to 180 minutes. That top figure is the boiling point of water at sea level. Follow your recipe for the temperature and time your food needs.
Can I use a pressure cooker as a canner?
Only if the maker states it is a canner. VEVOR lists three pressure settings on its 10 quart Pressure Cooker but does not describe it as a canner. Presto and NESCO both describe their models as canners and list canning among the functions. A pressure cooker that is not stated as a canner is a cooking pot.
Why do jars break in a water bath canner?
McSunley ties jar breakage to hot spots and states its aluminum encapsulated base spreads heat to limit them. Load jars on the rack so they do not touch the bottom, keep them upright, and leave space between them so water circulates. Follow the maker's rack capacity rather than crowding the pot.
Ready to compare actual models?
Our buying guides put five products side by side on the numbers their makers publish.