Explainer
How do you clean braising pans?
Let the pan cool a little, then deglaze stuck-on bits with warm water, and wash with mild soap and a soft sponge or brush. For enameled cast iron avoid harsh abrasives and never shock a hot pan with cold water, and dry it fully to protect the enamel and any exposed rim.
By the Lush Editorial Team·Researched & Compared
You clean a braising pan by letting it cool a little, loosening any stuck-on food by deglazing with warm water, then washing it with mild dish soap and a soft sponge or brush, and drying it fully. Most braisers are enameled cast iron, which cleans easily but needs a gentle touch: avoid harsh abrasives and metal scourers that scratch the enamel, and never pour cold water into a hot pan, as the thermal shock can crack the enamel. Done gently and promptly, a braiser is one of the easier pans to keep clean. Our Best Braising Pans compares five of them.
Start by letting it cool and deglazing
The first step is patience. Let the pan cool from cooking heat before you wash it, both because a thin hot enamel surface can crack if hit with cold water and because handling a hot heavy pan over a sink is awkward and risky. A short wait while you eat is usually enough; you want it warm, not scalding.
While it is still warm, deal with the browned, stuck-on bits that braising leaves, which are the hardest part to clean but also the easiest if you tackle them right. Pour in some warm water, return it to a low heat for a moment if needed, and let it sit so the residue softens and lifts, the same deglazing you might do to make a sauce. This loosens the fond so you are not scrubbing hard at dried-on food.
The main wash
Once the stuck bits have softened, wash the pan with warm water, a little mild dish soap and a soft sponge, dishcloth or soft-bristled brush. Enameled cast iron does not need and does not like aggressive scrubbing, so let the deglazing do the work and wipe the loosened residue away rather than attacking it. A nylon scraper is useful for any stubborn spots without harming the enamel.
Avoid steel wool, scouring powder and metal utensils, which scratch and dull the smooth enamel over time and can lead to staining and sticking. For stubborn stuck-on food that resists deglazing, a paste of baking soda and water left to sit for a while, or simmering water with a spoon of baking soda in the pan, lifts it gently. This is the go-to for enamel because it is effective without being abrasive.
Stains, discoloration and the interior
Light-colored enamel interiors pick up brown staining from long braising, which is normal and cosmetic rather than dirt. If it bothers you, a baking soda paste or a simmer of water with baking soda usually lightens it, and for tougher marks a dedicated cookware cleaner made for enamel can be used occasionally as directed. There is no need to scour the pan raw chasing a stain that does not affect cooking.
Do not use bleach or harsh chemicals routinely, and rinse thoroughly after any cleaner so none is left in a pan you cook food in. If your braiser is bare, seasoned cast iron rather than enameled, treat it differently: clean it with hot water and a brush, minimal or no soap, dry it immediately and re-oil it lightly to protect the seasoning, since bare iron rusts where enamel does not.
Drying and ongoing care
Dry the pan thoroughly after washing, which matters even for enameled cast iron because many braisers have an exposed cast iron rim or edges where the enamel ends, and those bare spots can rust if left wet. A towel dry followed by a few minutes air drying leaves no moisture to cause problems, and a wipe of oil on any exposed rim gives extra protection.
Store the pan dry, and if you stack it, put a cloth or pan protector between it and others so the enamel is not chipped by metal contact, since a chip exposes the iron beneath. Treated this way, cooled before washing, deglazed, washed gently, and dried fully, a braising pan stays clean, keeps its smooth enamel intact and lasts for decades, which is a large part of why good enameled cast iron is worth its cost.
The short answer
To clean a braising pan, let it cool a little first, then soften the stuck-on braising residue by deglazing with warm water before washing with mild soap and a soft sponge or brush and drying it fully. Because most braisers are enameled cast iron, be gentle: skip steel wool, scouring powder and metal tools that scratch the enamel, and never pour cold water into a hot pan, which can crack it through thermal shock. Lift stubborn food and lighten normal brown staining with a baking soda paste or a baking soda simmer rather than scrubbing hard. Dry the pan thoroughly, especially any exposed cast iron rim that can rust, and store it protected from chips, and it will stay clean and last for decades.
Common questions
How do you clean a braising pan?
Let it cool a little, then deglaze the stuck-on bits with warm water to soften them, and wash with mild dish soap and a soft sponge or brush before drying it fully. Most braisers are enameled cast iron, so avoid harsh abrasives and metal scourers that scratch the enamel, and never shock a hot pan with cold water, which can crack it.
How do I remove stuck-on food from an enameled braiser?
Deglaze while the pan is still warm: add warm water, warm it briefly if needed, and let the residue soften and lift rather than scrubbing dried food. For stubborn spots, use a paste of baking soda and water left to sit, or simmer water with a spoon of baking soda in the pan. A nylon scraper helps, but avoid steel wool and scouring powder on enamel.
Why should you not put cold water in a hot braising pan?
Because most braisers are enameled cast iron, and pouring cold water into a hot pan creates a sudden temperature change, thermal shock, that can crack or craze the enamel. Let the pan cool from cooking heat before washing, or deglaze with warm rather than cold water. This simple habit protects the enamel surface that makes the pan easy to cook in and clean.
How do I get stains out of a light enamel braiser?
Brown staining inside a light enamel braiser from long braising is normal and cosmetic, not dirt. Lighten it with a baking soda paste or by simmering water with a spoon of baking soda, and use a cookware cleaner made for enamel occasionally for tougher marks. There is no need to scour it raw, since the stain does not affect how the pan cooks.
Do you need to dry a braising pan straight away?
Yes, dry it thoroughly after washing. Even enameled cast iron braisers often have an exposed cast iron rim or edge where the enamel ends, and those bare spots rust if left wet. Towel dry, let it air a few minutes, and wipe a little oil on any exposed rim for extra protection. Store it dry and cushioned from other pans so the enamel is not chipped.
Ready to compare actual models?
Our buying guide puts five products side by side on the numbers their makers publish.