Lush Food & Drink

Explainer

Can nonstick pans lose their nonstick?

Yes. Every nonstick coating wears down with use, and the makers of the pans this site has compared describe coatings that degrade, scratch or peel over time.

By the Lush Editorial Team·Researched & Compared

Yes, a nonstick pan can lose its nonstick. The coating on a nonstick cooking surface wears down with use, and it can also be scratched, abraded or peeled, at which point food starts to stick where it once released.

What the makers publish about their own pans shows how they treat the coating: some describe a coating thickness, some describe a reinforced or bonded finish, and some sell pans with no coating at all. None of the guides this site has published measures how long a coating lasts, so the figures below describe the pans as the makers state them, not how they perform after months of cooking.

How a nonstick coating stops releasing food

A nonstick surface works because the coating sits between the food and the metal. Once that layer is worn thin, scratched through or lifted at an edge, the metal underneath is exposed and food bonds to it. The makers describe their coatings in different ways. CAROTE states that its 4-Cup Nonstick Granite Egg Pan uses a 5mm thick nonstick coating, and HUPECHAM states the same 5mm coating thickness for its 4-Cup Egg Pan Nonstick. Those are the makers’ published coating figures, not a measure of how long the pan stays nonstick.

Other makers describe the bond rather than a thickness. Winco states that its 8″ Aluminum Fry Pan/Skillet has a heavy-duty nonstick finish bonded to the aluminum for a long-lasting, scratch-resistant finish. Tramontina states that its Professional 8-Inch Non Stick Small Frying Pan has a reinforced nonstick coating for food release with less oil. A bonded or reinforced finish is the maker’s description of how the coating is attached, and a scratch or a worn spot still breaks the release surface.

The Best Egg Pans for Cooking Four Eggs or One guide compares five egg pans, and the coating descriptions above come from that fact sheet. What none of those makers publish is a service life in years or a number of cooking cycles before the coating degrades. That figure does not appear on the fact sheet, so this site has not compared it.

Care instructions and heat limits that bear on coating life

Makers pair their coatings with care instructions, and those instructions are the closest thing to guidance on keeping a coating intact. Tramontina states that its Professional 8-Inch pan is dishwasher-safe, and its coating is described as reinforced. CAROTE states that its 4-Cup pan should be wiped with a paper towel or rinsed with water, and that the interior is rivetless to keep food from sticking. Hand washing and gentle tools are the usual maker recommendations, and abrasive scrubbing is what a coating is least able to survive.

Heat limits vary by pan. The Tramontina Professional 8-Inch pan is stated as oven-safe up to 400°F. The CAROTE and HUPECHAM 4-cup pans do not carry an oven temperature in their published features. In the crepe pan guide, Best Crepe Pans for Batter Spread and Flat Cooking, the ESLITE LIFE 9.5 Inch Nonstick Crepe Pan is stated as oven safe to 302F, the SENSARTE 10 Inch Nonstick Crepe Pan is stated as oven safe to 302°F, and the Cuisinart Chef’s Classic Nonstick Hard Anodized 10″ Crepe Pan is stated as oven safe to 500°F. Exceeding a stated limit is the kind of use a coating is not built for.

Utensils matter too. The MICHELANGELO 12-Inch Stainless Steel Saute Pan with Lid, compared in Best Braising Pans for Searing and Oven Finishing, is described by its maker as having an uncoated, metal utensil safe cooking surface, and the maker states plainly that the pan is not nonstick. That is the alternative: a pan with no coating has no coating to lose.

Pans that have no nonstick coating to lose

Several picks in these guides are bare metal or have a coating the maker describes differently. The Tramontina Signature Tri-Ply Clad Stainless Steel 6-Quart Braiser Pan is stainless steel with an aluminum core, and its published features do not describe a nonstick coating. The HOMICHEF 15 Quart Stainless Steel Braiser Pan is nickel-free stainless steel with a 3-ply base, again with no nonstick coating in its published features. The Winco 8 qt Stainless Steel Brazier Pan is described as 3003 aluminum with a flat bottom, and its features do not mention a nonstick finish.

In the cake pan guide, Best Cake Pans for Layer Cakes and Cheesecakes, the EWFEN 8 Inch Cake Pan Set is stainless steel, and the maker states that its pans have no nonstick coating and that this avoids losing coatings. The Fat Daddio’s Anodized Aluminum Round Cake Pans are anodized aluminum, and the maker states they will never rust, peel or flake. The Wilton Aluminum Round Cake Pan Set is aluminum made without PFAS. None of these three carries a nonstick coating in its published features.

Where a coating is present, the maker says so. The HIWARE Springform Pan Set of 3 is described as having a true double layer nonstick coating, and the tutikuki 8″ Round Cake Pan set is described as nonstick carbon steel. The Crock-Pot Artisan Enameled Cast Iron Braiser is described as cast iron with a non-stick surface. Each of those is a coating that can wear, and each maker’s care instructions apply to it.

What follows for a pan you already own

A coating that has started to stick in one spot, or that shows scratches down to the metal, has lost the surface that made it nonstick. The maker descriptions above point to the same conclusion: the coating is a layer, and a layer can be worn through. The pans whose makers describe a bonded, reinforced or thick coating are stating how the coating is built, and those statements are about the pan as shipped.

For a pan with no coating, the release comes from technique. The MICHELANGELO maker states that its pan should be preheated over medium heat with oil added, and that food should sear until it releases naturally before turning. That is the maker’s instruction for an uncoated surface, and it is the reason an uncoated pan does not lose a nonstick layer: there is none to lose.

This site has not tested any of these pans and does not time how long a coating lasts. The figures quoted here are the ones the makers publish, and where a maker publishes nothing about coating life, this page says so rather than filling the gap.

Common questions

Do all nonstick pans eventually lose their coating?

Every nonstick coating is a layer on top of metal, and a layer can be worn, scratched or peeled. The makers in these guides describe coatings as bonded, reinforced or a stated thickness, which describes how the coating is built, not how long it lasts. This site has not compared coating life across pans.

Does hand washing keep a nonstick coating intact longer?

Makers give care instructions rather than durability claims. CAROTE states its 4-Cup pan should be wiped or rinsed, and Tramontina states its Professional 8-Inch pan is dishwasher-safe. Neither maker publishes a figure for how many washes or years a coating survives, so this site has not compared that.

Can high heat damage a nonstick pan?

Makers publish oven limits for some pans. The Tramontina Professional 8-Inch pan is stated as oven-safe up to 400°F, the ESLITE LIFE and SENSARTE crepe pans to 302F and 302°F, and the Cuisinart crepe pan to 500°F. Cooking above a stated limit is outside what the maker describes.

Which pans in these guides have no nonstick coating?

The Tramontina Signature 6-Quart Braiser, the HOMICHEF 15 Quart Braiser, the Winco 8 qt Brazier, the EWFEN 8 Inch Cake Pan Set, the Fat Daddio's Anodized Aluminum pans and the Wilton Aluminum pans carry no nonstick coating in their published features. The MICHELANGELO saute pan is stated by its maker as not nonstick.

What does a 5mm coating thickness mean?

CAROTE and HUPECHAM each state a 5mm thick nonstick coating on their 4-cup egg pans. That is the maker's published coating figure. It describes the coating as built, and neither maker publishes a service life or a number of uses before the coating degrades.

Can a scratched nonstick pan be repaired?

None of the makers in these guides publishes a repair or recoating service for a worn nonstick surface. The published features describe the coating as shipped and give care instructions. Where a coating is worn through to the metal, no maker statement on the fact sheet covers restoring it.

Ready to compare actual models?

Our buying guides put five products side by side on the numbers their makers publish.

More questions about braising pans