Lush Food & Drink

Explainer

What makes a skillet a skillet?

A skillet is a shallow, open pan with a flat cooking base and low, sloping or straight sides, usually fitted with one long handle, and it is the shallow depth and open top, not the material, that define it.

By the Lush Editorial Team·Researched & Compared

A skillet is a shallow cooking pan with a flat base, low sides and an open top, usually fitted with one long handle. What makes it a skillet is that shallow depth and open top, which let steam escape and let you reach the food with a spatula, rather than the metal it is made from.

That definition is about shape, and shape is what separates a skillet from the deeper vessels in the same aisle. A braising pan, a saute pan and a rondeau all share the flat base, but they carry taller, straighter walls and often two loop handles. The Best Braising Pans for Searing and Oven Finishing guide gives useful published figures for that deeper family, and they show how far the walls can climb.

The shape is the definition

Three features do the work. First, a flat bottom that sits level on the heat source and gives food full contact. Second, low sides, so moisture can boil off and browned food stays browned instead of steaming. Third, an open top with no lid in place during the sear, so you can watch the surface and move food around.

The braising pans in the cited guide show the contrast. The Tramontina Signature Tri-Ply Clad Stainless Steel 6-Quart Braiser Pan publishes a height of 5.19 inches, and the HOMICHEF 15 Quart LARGE Stainless Steel Braiser Pan publishes 5.5 inches. The MICHELANGELO 12-Inch Stainless Steel Saute Pan with Lid publishes 3.54 inches of side depth in its feature text. Those walls are taller than a skillet’s, and the taller the wall, the more the pan traps steam and the more it behaves like a braiser.

A skillet’s low wall is not a shortcut in manufacturing. It is the point. A shallow pan lets a cook slide a spatula under a piece of protein without climbing a wall, and it lets liquid reduce quickly because the surface area at the top is wide relative to the volume below.

Handles and the open top

Most skillets carry one long handle, sized so the pan can be lifted and tilted with one hand. That single handle is part of the working definition: it lets you shake the pan, toss vegetables and pour off fat at the rim. Deeper pans often add a second loop handle because a full pan of braising liquid is too heavy for one grip.

The cited guide’s picks show both arrangements. The MICHELANGELO saute pan uses two dual-riveted stainless steel loop handles for two-hand support when carrying a full dinner. The Winco 8 qt Stainless Steel Brazier Pan with Lid lists 6 point riveted handles, reinforced and riveted in place. The Crock-Pot Crock Pot Artisan Enameled Cast Iron Braiser publishes generous sized handles among its features. None of these is a skillet, and the handle layout is one reason.

The open top matters as much as the handle. A skillet is designed to be used uncovered for most of its work, and a lid, when one is offered at all, is an accessory rather than part of the cooking method. A braiser’s lid is central to what the pan does.

A lid changes the pan’s job

When a pan ships with a fitted lid and the maker describes that lid as part of the cooking, the pan is built for moist heat. The Tramontina braiser’s stainless steel lid is described as sealing in moisture. The Crock-Pot braiser’s self-basting lid is described as creating a continuous basting environment. The HOMICHEF lid is designed to release excess vapors while circulating heat and moisture.

A skillet can have a lid, but the lid is not the reason it exists. The reason is the dry, hot, open surface that browns food and drives off water. That is why the same word, skillet, is used for a shallow pan whether it is bare cast iron, enameled cast iron, carbon steel, stainless steel or aluminum.

Material changes how a skillet performs, not whether it is one. The Winco brazier, for instance, is made from extra heavyweight 6mm thick 3003 aluminum, and the Tramontina braiser uses an aluminum core for even heat distribution. Those are construction choices inside a deeper pan. A skillet made from the same aluminum would still be a skillet because of its depth.

Depth, capacity and the published figures

Depth is the number to check, and the cited guide publishes it for every pick. The Tramontina braiser is 5.19 inches tall, the HOMICHEF is 5.5 inches, the Crock-Pot is 13.25 inches in its listed height, the MICHELANGELO saute pan is 4.0 inches tall with 3.54 inches of side depth in its text, and the Winco brazier is 5.12 inches. Capacity runs from 5 quarts on the Crock-Pot to 15 Quarts on the HOMICHEF, with the Tramontina at 6-Quart, the MICHELANGELO at 6 qt and the Winco listed at 8.5 Quarts.

Those capacities are large because the pans are deep. A skillet of the same width holds far less, and that is deliberate: less volume, more exposed surface, faster evaporation. If you are choosing between the two shapes, read the height and the capacity together and picture how much of the wall the food will sit behind.

This site has not compared skillets on published depth figures, so no skillet measurement appears here. The makers of the pans above publish the numbers quoted, and those numbers are the ones to use when judging how deep a pan is.

Where the words blur

Retailers use skillet, fry pan and frying pan interchangeably, and some use saute pan for a pan with taller straight walls and a lid. The MICHELANGELO listing is a good example of the blur: it is titled a saute pan, described in its features as a stainless steel braiser and as a rondeau-style everyday pan, and it publishes a 12 in diameter with 3.54 in deep sides. The shape, not the label, tells you what it will do.

The bread maker guide is not relevant to pan shape, and it is cited here only because it is one of this site’s published comparisons. The Best Bread Makers for Custom Loaves and Schedules guide covers appliances with baking pans inside them, and those pans are enclosed cavities, the opposite of an open skillet.

The practical test is simple. Set the pan on the counter and look at the wall. If the wall is low enough that a spatula clears it and the top is wide open, it is a skillet in everything but name. If the wall is tall and a lid is part of the design, it is a braiser or a saute pan, and the cited guide’s figures show exactly how tall those walls get.

Common questions

Is a skillet the same as a frying pan?

In US usage, yes. Skillet and frying pan describe the same shallow, open pan with a flat base and low sides. Some cookware lines use fry pan in the product name and skillet in the description. The shape is the constant: low walls, open top, flat cooking surface, usually one long handle.

Does a skillet need a lid?

No. A skillet is built to cook uncovered, which is how browning happens. A lid can be useful for finishing or melting, but it is an accessory. Pans where the lid is central to the cooking, such as the braising pans in this site's braising pan guide, are designed around moist heat rather than dry heat.

Can a skillet go in the oven?

Many can, and the maker states the limit. The MICHELANGELO saute pan in the cited guide publishes an oven-safe pan body to 500°F and a glass lid safe to 350°F. The Tramontina braiser publishes oven safety up to 500°F. Check the maker's own figure for the specific pan, since handles and lids often have lower limits than the body.

What is the difference between a skillet and a saute pan?

Wall height and the lid. A saute pan has taller, straighter sides and usually a lid, which holds liquid and limits evaporation. A skillet has low, often sloping sides and an open top, which encourages evaporation and browning. The MICHELANGELO saute pan in the cited guide publishes 3.54 in deep sides, taller than a typical skillet wall.

Does the material decide whether a pan is a skillet?

No. Skillets are made from cast iron, carbon steel, stainless steel, aluminum and enameled iron. Material affects heat response and weight, not the category. The Winco brazier in the cited guide is 3003 aluminum and the Tramontina braiser uses an aluminum core, and both are deeper pans regardless of the metal.

How do I tell a skillet from a braiser by the numbers?

Read the published height and capacity together. The braising pans in the cited guide publish heights of 5.19 inches, 5.5 inches, 13.25 inches and 5.12 inches, with capacities from 5 quarts to 15 Quarts. A skillet of similar width is shallower and holds less, which is the whole point of the shape.

Ready to compare actual models?

Our buying guides put five products side by side on the numbers their makers publish.

More questions about braising pans