Explainer
What is a non stick skillet?
A non stick skillet is a frying pan with a coating on the cooking surface that releases food with little or no added fat.
By the Lush Editorial Team·Researched & Compared
A non stick skillet is a frying pan whose cooking surface carries a coating that keeps food from bonding to the metal, so eggs, fish and delicate sauces lift away with little or no added fat. The coating is the defining feature: the pan body underneath can be aluminum, carbon steel or stainless steel, but the release comes from the layer on top.
Not every pan sold for searing and braising is nonstick. Several stainless steel and aluminum pans in the guides below are deliberately uncoated, and their makers say so. Reading the maker’s own description is the only reliable way to tell which kind of pan you are holding.
How a non stick coating works
A non stick coating is a low friction layer applied to the cooking surface. Because food does not adhere to it, you can cook without oil or butter and still turn an egg or a fillet in one piece. The coating also makes cleanup easier, since residue wipes away rather than bonding to the metal. The trade off is that the coating is softer than bare metal, so metal utensils and abrasive cleaners can scratch it.
Makers describe the coating in different ways. The HIWARE Springform Pan Set of 3, which appears in Best Cake Pans for Layer Cakes and Cheesecakes, uses what the maker calls a true double layer non-stick coating, and the pans are hand wash recommended. That is a baking pan rather than a skillet, but the coating principle is the same: a release layer on top of a metal body.
The Crock-Pot Artisan Enameled Cast Iron Braiser, listed in Best Braising Pans for Searing and Oven Finishing, is described by its maker as cast iron with a non-stick surface. Here the release comes from an enameled finish on cast iron rather than a sprayed coating on aluminum. The maker recommends hand washing. Both approaches give a surface that releases food, but the underlying material and the care instructions differ.
Pans that are not nonstick
Many pans that look smooth are not nonstick at all. The MICHELANGELO 12-Inch Stainless Steel Saute Pan with Lid, one of the picks in the braising pan guide, states plainly in its published features that it is not nonstick. The maker advises preheating over medium heat, adding oil, and letting food sear until it releases naturally before turning. That is the opposite of the non stick method, where food releases without added fat.
The Tramontina Signature Tri-Ply Clad Stainless Steel 6-Quart Braiser Pan is built from tri-ply clad stainless steel with an aluminum core. Its published features describe even heat distribution and a mirror polished exterior, but they do not mention a non stick coating. The same is true of the HOMICHEF 15 Quart Stainless Steel Braiser Pan, whose features describe nickel free stainless steel and a thick base, and of the Winco 8 qt Stainless Steel Brazier Pan, whose features describe a flat aluminum bottom and riveted handles. None of these makers claims a non stick surface.
This matters when you shop. A stainless steel pan with a shiny interior is usually uncoated, and the maker expects you to use fat and preheat it. A pan described as non stick will say so in its features, often alongside care instructions such as hand wash recommended.
What sits under the coating
The pan body determines how the skillet heats and how much it weighs. Aluminum spreads heat quickly and is light. The Fat Daddio’s Anodized Aluminum Round Cake Pans, from the cake pan guide, are made from 16 gauge anodized aluminum and the maker states they are temperature rated up to 550°F. Anodized aluminum is not the same as a non stick coating, but it is a treated surface that the maker says will never rust, peel or flake.
Carbon steel is another common base. The tutikuki 8 Inch Round Cake Pan set is made of carbon steel, and the maker states the pans handle oven temperatures up to 450°F. Carbon steel heats evenly and is sturdy, and in a skillet it is often paired with a non stick coating or seasoned bare.
Stainless steel is the base for several braising pans in the guide. The Tramontina pan weighs 6.76 pounds and measures 15.75 inches wide by 13.82 inches deep by 5.19 inches high, figures the maker publishes. The HOMICHEF pan weighs 10.3 pounds and measures 14.2 inches wide by 14.2 inches deep by 5.5 inches high. These are heavy pans built for oven finishing, and their makers do not describe a non stick coating.
Care and oven limits
Non stick coatings have temperature limits, and makers publish them. The HIWARE springform pans are oven safe to 450 degrees Fahrenheit according to the maker. The tutikuki carbon steel pans are rated to 450°F. The Wilton Aluminum Round Cake Pan Set is oven safe to 450°F, and the maker states it is made without PFAS and is not dishwasher safe. These figures apply to the pans named, not to every non stick pan.
Hand washing is common advice for coated pans. The HIWARE set is hand wash recommended. The Crock-Pot braiser is hand wash recommended. The EWFEN 8 Inch Cake Pan Set is dishwasher safe, but the maker recommends hand washing to extend product life. By contrast, the Tramontina braiser is described as dishwasher safe, and the MICHELANGELO saute pan is dishwasher safe, though neither is described as non stick.
Utensil choice follows from the coating. A non stick surface is softer than stainless steel, so metal tools can scratch it. The MICHELANGELO pan, which is not nonstick, is described as metal utensil safe. That is a useful contrast: if a maker advertises metal utensil safety, the pan is usually uncoated.
How to tell what you are buying
Read the maker’s feature list before you buy. A non stick pan will say non stick or non-stick in its description. The Crock-Pot braiser says cast iron with a non-stick surface. The HIWARE springform says true double layer non-stick coating. A pan that does not use the word is probably uncoated, even if the photo looks smooth.
Check the published dimensions and weight if you plan to move the pan from stovetop to oven. The Tramontina braiser is 15.75 inches wide and weighs 6.76 pounds. The Winco brazier is 11.02 inches wide and weighs 5.89 pounds. The MICHELANGELO saute pan is 12 inches wide and 4 inches high, with a 6 quart capacity. These figures come from the makers, and they help you judge whether a pan fits your burner and your oven.
Finally, match the pan to the task. A non stick skillet is for eggs, fish and low fat cooking. A stainless or cast iron braiser is for searing and oven finishing, where the maker expects you to use oil and preheat. The two are not interchangeable, and the maker’s own description is the best guide to which one you have.
Common questions
Is a non stick skillet the same as a frying pan?
A non stick skillet is a type of frying pan. The term skillet usually means a shallow pan with sloped sides, and non stick refers to the coating on its cooking surface. A frying pan without that coating is still a frying pan, but it is not a non stick skillet.
Can I use metal utensils in a non stick skillet?
Most makers advise against it. A non stick coating is softer than bare metal, and metal tools can scratch it. The MICHELANGELO saute pan, which is not nonstick, is described by its maker as metal utensil safe, which shows the difference between coated and uncoated surfaces.
Are all stainless steel pans non stick?
No. Several stainless steel pans in the braising pan guide are uncoated. The MICHELANGELO pan states it is not nonstick, and the Tramontina, HOMICHEF and Winco pans do not list a non stick coating in their published features. Stainless steel pans usually require oil and preheating.
What temperature can a non stick pan reach?
It depends on the maker. The HIWARE springform pans are oven safe to 450 degrees Fahrenheit, and the tutikuki carbon steel pans are rated to 450°F. The Wilton aluminum pans are oven safe to 450°F. Always check the maker's published limit for the specific pan.
Does a non stick coating change how a pan heats?
The coating is a thin surface layer, so the pan body does most of the heat work. An aluminum core spreads heat evenly, as the Tramontina braiser describes, while cast iron holds heat. The coating affects release and cleanup more than the heating pattern.
Ready to compare actual models?
Our buying guides put five products side by side on the numbers their makers publish.