Explainer
What should you do if a skillet rusts?
Scrub the rust off with steel wool or a scouring pad, wash and dry the pan completely, then rub a thin layer of oil over the iron to seal it before storing.
By the Lush Editorial Team·Researched & Compared
Scrub the rust off with steel wool or a stiff scouring pad, wash the pan, dry it completely, then coat the iron with a thin layer of cooking oil. Rust on cast iron is surface oxidation of the iron itself, so removing it and resealing the metal restores the pan.
Rust forms when iron meets moisture and air, which is why a skillet left damp, stacked while wet, or stored in a humid spot discolors first. The fix is mechanical removal followed by a barrier of oil, and the same routine works whether the rust is a light orange film or a patch of flaking spots.
Remove the rust before you season
Start with the gentlest abrasive that lifts the rust. A stiff nylon brush or a scouring pad handles a light film; steel wool or fine sandpaper is for spots that have crusted. Work on the cooking surface and the walls, and pay attention to the rim and the outside of the pan, where moisture collects and rust often starts unnoticed.
Scrub until the orange color is gone and you see bare gray iron underneath. Do not worry about stripping the existing seasoning in the process: a patch of bare metal is easier to fix than rust left under a coat of oil, which will keep spreading. Rinse the pan and look again before you move on.
If the rust keeps returning in the same place, the cause is usually storage rather than the pan. A skillet stored with the lid on while still warm, or put away with a drop of water in the bottom, will rust again no matter how well it was scrubbed.
Dry it fully, then oil the iron
Dry the skillet on the stovetop over low heat for a few minutes rather than with a towel alone. Heat drives moisture out of the pores of the iron, and a towel can leave a thin film behind in the corners. Once the pan is warm and dry, rub a very thin layer of cooking oil over the whole surface, inside and out, with a paper towel.
Buff off the excess so the pan looks damp rather than wet. A heavy coat turns sticky and gummy when it sets, and a sticky pan collects dust and food residue. The aim is a barrier thin enough to polymerize into the seasoning rather than a layer that sits on top of it.
For a rusted pan that has lost most of its seasoning, repeat the oil and heat cycle a few times. Warm the pan, apply a thin coat, and let it cool before the next round. Each pass builds the black layer back up, and the pan is usable for cooking between rounds.
Enameled cast iron and stainless steel are different cases
Not every pan that rusts is bare iron. An enameled cast iron braiser has a glass coating over the iron, so rust on the cooking surface means the enamel has chipped and the iron underneath is exposed. The Crock-Pot Artisan Enameled Cast Iron Braiser, 5 Quart, Scarlet Red, which appears in Best Braising Pans for Searing and Oven Finishing, is listed by its maker as rust free with hand washing recommended, so the coating is the protection and chips are the weak point.
Stainless steel pans do not rust from water alone, but they can show spots if they are stored wet or exposed to salt and acidic foods for long periods. The Tramontina Signature Tri-Ply Clad Stainless Steel 6-Quart Braiser Pan in the same guide is listed as dishwasher safe with a mirror-polished exterior, and the maker does not publish a rust claim for it. Wash and dry it as you would any stainless pan.
For an enameled pan with a chip, the exposed iron will rust if left wet, so dry it carefully and keep a thin film of oil on the chipped spot. Do not scrub enamel with steel wool, which dulls the finish and can enlarge the damaged area.
Keep it from coming back
Store the skillet dry and uncovered, or with a paper towel between stacked pans to absorb moisture. Do not soak cast iron, and do not leave it in a sink or a dishwasher. A quick wipe with oil after each wash takes less time than another round of rust removal, and it keeps the seasoning intact between uses.
Humidity matters as much as washing. A skillet kept in a damp cabinet, a basement, or near a stove that sees heavy steam will rust even if it was dried properly. If storage conditions are humid, a slightly heavier coat of oil before storage is the practical answer.
Cook with the pan regularly. Frying and searing rebuild the seasoning naturally, and a pan in rotation stays protected. A skillet that sits unused for months is the one most likely to show orange spots the next time it comes out of the cabinet.
When rust means the pan is finished
Surface rust is fixable. Deep pitting, where the iron has corroded into craters that catch a fingernail, is not something scrubbing will reverse, and the pan will keep rusting in those pits. A skillet with widespread pitting across the cooking surface is a candidate for replacement rather than another round of seasoning.
For bakeware, the material question is simpler. The Fat Daddio’s Anodized Aluminum Round Cake Pans in Best Cake Pans for Layer Cakes and Cheesecakes are described by the maker as anodized aluminum that will never rust, peel or flake. The EWFEN 8 Inch Cake Pan Set in the same guide is listed as pure stainless steel, and the maker does not publish a rust claim for it.
The rule for any pan is the same: remove what has corroded, dry what remains, and seal the iron. A skillet that rusts is not ruined by default, and the repair is a scrubbing, a drying and a coat of oil.
Common questions
Can you cook in a skillet after it rusts?
Yes, once the rust is removed. Scrub the rust off, wash and dry the pan, and apply a thin coat of oil before cooking. Rust itself is oxidized iron, and the concern is the rough pitted surface it leaves, which will keep trapping moisture until it is scrubbed back to bare metal and resealed.
Does rust ruin cast iron?
Surface rust does not ruin cast iron. It is oxidation on the surface of the iron, and scrubbing it off followed by a thin coat of oil restores the pan. Deep pitting, where the corrosion has eaten into the metal, is the case where the damage cannot be reversed by cleaning.
Can you use steel wool on a rusted skillet?
Yes, on bare cast iron. Steel wool or a stiff scouring pad lifts surface rust without harming the iron underneath, and any seasoning stripped in the process can be rebuilt. Do not use steel wool on enameled cast iron, where it dulls the glass coating and can widen a chip.
Why does my skillet keep rusting?
Moisture and air reaching bare iron. A pan stored damp, stacked while wet, kept with the lid on, or left in a humid cabinet will rust again regardless of how well it was scrubbed. Drying it on the stovetop and applying a thin oil coat before storage addresses the cause.
Should you season a skillet after removing rust?
Yes. Scrubbing removes rust and often some seasoning with it, leaving bare gray iron that will oxidize again quickly. A thin coat of oil, heated and cooled, rebuilds the barrier. Repeat the cycle a few times if the pan lost most of its black coating.
Does an enameled cast iron pan rust?
The enamel coating protects the iron, so the pan does not rust where the coating is intact. Where the enamel chips, the exposed iron underneath can rust. Dry chipped spots carefully and keep a thin film of oil on them, and avoid scrubbing enamel with abrasives.
Ready to compare actual models?
Our buying guides put five products side by side on the numbers their makers publish.