Lush Food & Drink

Explainer

Are pressure canners dishwasher safe?

Generally no: a pressure canner is best hand washed, not put in the dishwasher, because it is large and because its lid, gasket, gauge and valves should not go through a dishwasher. Hand wash the pot and lid, and clean the gasket, vent and gauge carefully by hand, keeping any gauge dry.

By the Lush Editorial Team·Researched & Compared

Generally, no, pressure canners are best hand washed rather than put in the dishwasher. A pressure canner is a large, heavy pot with a sealing lid that has a rubber gasket, a vent pipe, pressure regulator/valve and often a dial gauge, and while the pot itself might tolerate a dishwasher, the lid and its parts generally should not go through one, and the canner is usually too big to fit anyway. The gasket (rubber seal) can be degraded by dishwasher heat and detergent, a dial pressure gauge must be kept dry and not submerged or dishwashed (water can damage it and affect its accuracy), and the vent/valves are better cleaned by hand to keep them clear and undamaged. So the sensible answer is to hand wash a pressure canner: wash the pot and the lid by hand in warm soapy water, and clean the gasket, vent pipe, valves and (carefully, keeping it dry) the gauge by hand, drying everything. Always follow the manufacturer’s instructions, which typically specify hand washing for these parts. So a pressure canner is a hand-wash item, not a dishwasher one. Our Best Pressure Canners compares five of them.

Why hand washing is best

A pressure canner is best hand washed because it has delicate, important parts that the dishwasher can damage, and because it is large and heavy. Unlike a simple pot, a pressure canner relies on a sealing lid with a rubber gasket, a vent pipe, a pressure regulator or weight, safety valves, and often a dial pressure gauge, and these components are what make it safe and functional, so protecting them matters. The dishwasher’s harsh detergents, high heat and water can harm several of them, so hand washing is the safe, recommended approach.

Its size is also practical: a pressure canner is a big pot, often too large to fit in a dishwasher anyway, so hand washing is usually necessary regardless. And manufacturers of pressure canners typically instruct hand washing for the lid and parts (and often the whole canner), precisely to protect the gasket, gauge and valves. So the combination of delicate functional parts that the dishwasher could damage and the canner’s bulk means hand washing is the right method. Understanding that a pressure canner is not just a pot but a safety device with sensitive parts explains why you do not simply dishwasher it, and why careful hand cleaning of those parts is important, which is covered below.

The lid, gasket, gauge and valves

The parts that specifically should not go in the dishwasher are the lid’s components: the gasket, the gauge, and the vent/valves. The rubber sealing gasket (on canners that have one) can be degraded, dried out, warped or prematurely aged by the dishwasher’s heat and harsh detergent, which would compromise the seal, so it should be washed gently by hand (and removed to clean if the design allows), rinsed and dried, and kept in good condition. A damaged gasket means the canner will not seal, so protecting it is important.

A dial pressure gauge (on dial-gauge canners) must be kept dry and never submerged or put in the dishwasher, because water can get into the gauge mechanism, damaging it and affecting its accuracy, which matters for safe canning, so you wipe around the gauge rather than immersing it (and have dial gauges tested periodically for accuracy). The vent pipe (steam vent), pressure regulator/weight and safety valves must be kept clear and clean and are cleaned by hand (the vent pipe should be checked it is not blocked, often cleaned by running water through or with a small brush/pipe cleaner), not relied on to be cleaned in a dishwasher. So the lid and all its functional parts are hand-clean items, and dishwashing them risks damaging the seal, the gauge’s accuracy, or the valves, which are exactly the parts a pressure canner depends on, so they must be cleaned carefully by hand.

Cleaning the pot

The pot (the body of the canner) is cleaned by hand too, in warm soapy water, even though the metal pot might physically tolerate more, because the canner is large (often not dishwasher-fitting) and it is simplest to wash the whole thing by hand together. Wash the inside and outside of the pot with warm soapy water and a sponge or cloth, removing food residue and any mineral deposits. Note the material: many pressure canners are aluminum, and aluminum should not go in the dishwasher anyway (dishwasher detergents cause aluminum to oxidize, darken and corrode), so aluminum canners are hand-wash; stainless steel pots are more tolerant but are still usually hand washed given the size and the lid issue.

Hard-water or mineral deposits and discoloration inside the pot (common with canning) can be cleaned with a solution of water and a little vinegar or cream of tartar (for aluminum), rather than harsh dishwasher cleaning. Rinse and dry the pot after washing. So the pot is hand washed in soapy water (especially if aluminum), cleaned of residue and any deposits, and dried. This, together with the careful hand cleaning of the lid and its parts, is how you clean the whole canner, by hand, which both suits its size and protects all the components. So neither the pot (especially aluminum) nor the lid is a dishwasher item in practice.

The practical approach and care

The practical approach is to hand wash the entire pressure canner and follow the manufacturer’s instructions. After use, wash the pot in warm soapy water, wash the lid by hand, remove and gently wash the gasket (if removable) and dry it, clean the vent pipe and check it is clear, wipe the valves/regulator, and wipe around the dial gauge without wetting it (keeping the gauge dry), then dry everything thoroughly, metal to prevent corrosion (especially aluminum), and the gasket so it is not stored damp. Store the canner with the lid off or inverted (not sealed) so the gasket is not compressed and air can circulate.

So the answer is that pressure canners are generally not dishwasher safe and should be hand washed: the gasket can be degraded by the dishwasher, the dial gauge must stay dry, the valves and vent are cleaned by hand, aluminum pots should not be dishwashed, and the canner is usually too big to fit. Always check and follow the maker’s cleaning guidance for your specific canner, as it will confirm hand washing and any particular care. Cleaned and cared for this way, a pressure canner stays safe, functional and in good condition for its next use. So treat a pressure canner as a hand-wash item, cleaning the pot and lid and carefully tending the gasket, vent, valves and gauge by hand, which is what keeps this safety-critical appliance working properly.

The short answer

Generally, no, pressure canners are not dishwasher safe and are best hand washed. A pressure canner is a large, heavy pot with a sealing lid that has a rubber gasket, a vent pipe, a pressure regulator or weight, safety valves and often a dial gauge, and these functional parts should not go through a dishwasher: the rubber gasket can be degraded, dried out or warped by the dishwasher’s heat and harsh detergent (ruining the seal), a dial pressure gauge must be kept dry and never submerged or dishwashed (water can damage it and affect its accuracy, which matters for safe canning), and the vent and valves are better cleaned by hand to keep them clear. Many canner pots are aluminum, which also should not go in the dishwasher (detergents corrode and darken aluminum), and the canner is usually too big to fit anyway. So hand wash the whole thing: wash the pot and lid in warm soapy water, gently wash and dry the gasket, clean and check the vent pipe and valves, and wipe around the gauge without wetting it, then dry everything and store the lid off or inverted so the gasket is not compressed. Always follow the manufacturer’s instructions, which typically specify hand washing. So a pressure canner is a hand-wash item, cleaned carefully by hand to protect its safety-critical parts.

Common questions

Are pressure canners dishwasher safe?

Generally no, a pressure canner is best hand washed. Its lid parts, the rubber gasket, dial gauge and valves, should not go through a dishwasher, the gasket can be degraded by the heat and detergent, the gauge must stay dry, and the valves and vent are better cleaned by hand, plus aluminum pots corrode in dishwashers and the canner is usually too big to fit. So hand wash the pot and lid and carefully clean the gasket, vent, valves and gauge, following the maker's instructions, which typically specify hand washing.

Why can't you put a pressure canner in the dishwasher?

Because it has delicate, safety-critical parts the dishwasher can damage, and it is large. The rubber gasket can be degraded, dried out or warped by the dishwasher's heat and detergent, ruining the seal; a dial gauge must be kept dry and not submerged, as water damages it and affects its accuracy; and the vent and valves need careful hand cleaning to stay clear. Many canner pots are also aluminum, which dishwashers corrode, and the canner is usually too big to fit. So hand washing protects these parts.

Can you put the pressure canner lid in the dishwasher?

No, the lid and its parts should be cleaned by hand. The gasket can be degraded by dishwasher heat and detergent, compromising the seal; a dial pressure gauge must be kept dry and never submerged or dishwashed, since water can damage it and affect its accuracy; and the vent pipe, regulator and safety valves need hand cleaning to keep them clear and undamaged. So wash the lid by hand, remove and gently wash the gasket if removable, clean the vent and valves, and wipe around the gauge without wetting it.

How do you clean a pressure canner?

Hand wash the whole thing after use: wash the pot inside and out in warm soapy water (especially if it is aluminum, which dishwashers corrode), removing residue and any mineral deposits (a little vinegar or cream of tartar helps with aluminum discoloration). Wash the lid by hand, remove and gently wash and dry the gasket, clean the vent pipe and check it is clear, wipe the valves and regulator, and wipe around the dial gauge without wetting it. Then dry everything thoroughly and store the lid off or inverted.

How should you care for a pressure canner's gasket and gauge?

Clean the rubber gasket gently by hand (removing it if the design allows), rinse and dry it, keep it from dishwasher heat and harsh detergent that would degrade it, and store the canner with the lid off or inverted so the gasket is not compressed, replacing it when it hardens or no longer seals. Keep the dial gauge dry, never submerge or dishwash it, just wipe around it, and have it tested periodically for accuracy. Protecting these parts keeps the canner sealing properly and safe, which is why they are hand-cleaned.