How the Five Compare on the Numbers
A small batch of chocolate treats needs a mold that fits the counter you have, not the counter you wish you had. The published width and depth are the figures that decide it. The Fimary mold publishes 0.59 by 6.65 inches, the smallest width of the five. The Pniimoo mold publishes 6.57 by 10.0 inches. The Lerykin mold publishes 0.99 by 11.4 inches. The O’CREME and Actvty listings do not publish width, depth or height.
Weight matters for lifting and storing a mold in a small kitchen. The O’CREME mold publishes 0.1 pound, the lightest of the five. The Pniimoo mold publishes 0.2 pounds. The Fimary mold publishes 0.22 pounds. The Lerykin mold publishes 0.35 pounds. The Actvty mold publishes 0.49 pounds, the heaviest of the five. Cavity counts split the group too: the Actvty mold publishes 24 cavities across two packs, and the Lerykin mold publishes 15 cavities per pack.
| Specification |
Fimary |
Pniimoo |
Lerykin |
O’CREME |
Actvty |
| Published width |
0.59 in |
6.57 in |
0.99 in |
not published |
not published |
| Published depth |
6.65 in |
10.0 in |
11.4 in |
not published |
not published |
| Published height |
10.0 in |
0.75 in |
6.7 in |
not published |
not published |
| Published weight |
0.22 lb |
0.2 lb |
0.35 lb |
0.1 lb |
0.49 lb |
| Cavity count |
not published |
not published |
15 per pack |
not published |
24 across two packs |
| Temperature range |
-40°F to 446°F |
Not stated as a range |
-40°F to 446°F |
-10°F to 375°F |
-40°F to 440°F |
| Stated material |
Food grade silicone |
Food grade silicone |
Food grade silicone |
Bakeable plastic |
Food grade silicone |
| Stated release |
Non-stick and flexible |
Soft silicone, non-stick |
Non-stick, pops out |
Reusable, holds shape |
Non-stick and flexible |
The table does not tell you how a mold feels in the hand, how evenly it releases a set chocolate, or how it holds up after many pours. Nobody at Lush has used these molds, so this guide reports what the maker publishes and nothing more. Where a figure is missing, the manufacturer does not publish it.
Footprint and Counter Space
The published width and depth are the first figures to check when the counter is small. A mold that fits leaves room for a bowl, a spatula and a tray. A mold that does not fit gets stored and forgotten. The five picks split into two groups on this point: three publish a full set of dimensions, and two publish none at all.
Molds with published dimensions
The Fimary mold publishes 0.59 by 6.65 inches, the smallest width of the five, and 10.0 inches of height. The Pniimoo mold publishes 6.57 by 10.0 inches and 0.75 inches of height. The Lerykin mold publishes 0.99 by 11.4 inches and 6.7 inches of height. These three figures let you measure a drawer or a shelf before buying.
The Pniimoo mold publishes 6.57 inches of width, the largest of the five, so it needs the most side to side room. The Lerykin mold publishes 11.4 inches of depth, the largest of the five, so it needs the most front to back room. The Fimary mold publishes the smallest width, which suits a narrow strip of counter beside a sink or a stove.
Molds without published dimensions
The O’CREME listing does not publish width, depth or height. The maker states the pan is lightweight at 0.38 ounces per mold and reusable, but gives no footprint. The Actvty listing also does not publish width, depth or height for the mold itself. It publishes each cavity as 2.1 by 0.82 inches, which describes the treat, not the tray.
For a small counter, a mold with no published footprint is a risk. You cannot measure a drawer against a figure the maker does not give. The O’CREME and Actvty molds may still suit a small batch, but the buyer has to accept that the size is unknown until the package arrives. That is a real cost in a small kitchen.
Cavities, Fill Depth and Temperature Range
Once the mold fits, the next question is how many treats one pour makes and whether the mold can move between the freezer and the oven. The published cavity counts and temperature ranges answer both. The five picks differ here as much as they do on footprint, and the differences are stated plainly in the listings.
Cavity counts and fill depth
The Actvty mold publishes 24 cavities across two packs, each cavity 2.1 by 0.82 inches. The maker states this size suits a chocolate covered cookie without using too much chocolate. The Lerykin mold publishes 15 cavities per pack across two packs, shaped as half spheres. The Fimary, Pniimoo and O’CREME listings do not publish a cavity count.
Fill depth decides whether a mold can hold a layered treat. The Pniimoo listing publishes a 0.6 inch thickness and states it is enough for a layer of pistachio and nut filling. The Husfunov listing, which is not one of the five picks, also publishes a 0.6 inch depth for a stuffed knafeh pistachio layer. The other picks do not publish a cavity depth.
Temperature ranges
The Fimary and Lerykin molds publish -40°F to 446°F. The Actvty mold publishes -40°F to 440°F. All three ranges cover the freezer, the oven, the microwave and the dishwasher as the makers state. The O’CREME mold publishes -10°F to 375°F, a narrower range that still covers baking and freezing but stops well below the silicone molds.
The Pniimoo listing does not state a temperature range as a pair of figures. It states the mold is safe for freezers, ovens, microwaves and dishwashers, but gives no numbers. For a buyer who wants to compare ranges side by side, that is a gap. The maker states the safety, and the guide reports the statement without a figure to attach to it.
Which One Fits Your Kitchen
Buyer with a narrow counter strip. The Fimary mold publishes 0.59 by 6.65 inches, the smallest width of the five. It suits a slim space beside a sink, and its 10.0 inch height fits a tall shelf.
Buyer making layered pistachio bars. The Pniimoo mold publishes a 0.6 inch thickness for a nut filling layer and 6.57 by 10.0 inches of footprint. It weighs 0.2 pounds, so it is easy to lift.
Buyer making half sphere chocolates. The Lerykin mold publishes 15 cavities per pack across two packs and a -40°F to 446°F range. Its 11.4 inch depth needs a long stretch of counter.
Buyer making flan and gelatin desserts. The O’CREME mold publishes a -10°F to 375°F range and weighs 0.1 pound, the lightest of the five. The maker does not publish its dimensions.
Buyer covering cookies in chocolate. The Actvty mold publishes 24 cavities across two packs, each 2.1 by 0.82 inches. It weighs 0.49 pounds, the heaviest of the five, and the maker does not publish the tray size.
What We Could Not Verify
These are the figures I went looking for in the manufacturer listings and could not find. Where a figure is missing, this guide says the manufacturer does not publish it rather than filling it in.
- The O’CREME listing does not publish width, depth or height for the mold.
- The Actvty listing does not publish width, depth or height for the mold itself.
- The Fimary listing does not publish a cavity count.
- The Pniimoo listing does not publish a cavity count.
- The O’CREME listing does not publish a cavity count.
- The Pniimoo listing does not state a temperature range as a pair of figures.