Lush Food & Drink

Buying Guide ·Baking

Best Cake Turntables for Small Layer Cakes

A 7.0 inch base and a 12.0 inch top decide which of these five leaves the most counter free for small layer cakes.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

Five revolving stands compared on published width, depth, height and weight, plus the features each maker states, drawn from the fact sheet.

Our shortlist

Five products, one set of published numbers.
  1. Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St...
    Best for a narrow counter

    Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St...

    Publishes a 7.0 inch width and a 12.0 inch depth, matched only by the himaly at 7.0 inches.

    • RICCLE
    • 12"
    • 5.05 lb
  2. Ateco Revolving Cake Decorating Stand
    Best for guided placement

    Ateco Revolving Cake Decorating Stand

    Maker states a 12 inch round turntable on an aluminum base with a non-slip silicone cap.

    • Ateco
    • #615 12" Round, Aluminum Base
    • 4.8 lb
  3. Cake Stand Rotating 12"
    Best for a light stand

    Cake Stand Rotating 12"

    Publishes 2.0 lb with a 7.0 inch width and a 12.2 inch depth.

    • himaly
    • 12.2"
    • 2 lb
  4. Winco Stainless Steel Round Cake Stand
    Best for a stainless finish

    Winco Stainless Steel Round Cake Stand

    Maker states stainless steel construction with a round 13 inch design.

    • Winco
    • 13"
    • 1.8 lb
  5. Fat Daddio's TT-1255 Revolving Cake Stand
    Best for a single-piece stand

    Fat Daddio's TT-1255 Revolving Cake Stand

    Maker states only the name, with a published 12.0 by 12.0 inch footprint.

    • Fat Daddio's
    • 3.97 lb

Side by side

Blank means the maker does not publish it.
ModelBrandSize (capacity)WeightBest for
Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St... RICCLE 12" 5.05 lb Best for a narrow counter
Ateco Revolving Cake Decorating Stand Ateco #615 12" Round, Aluminum Base 4.8 lb Best for guided placement
Cake Stand Rotating 12" himaly 12.2" 2 lb Best for a light stand
Winco Stainless Steel Round Cake Stand Winco 13" 1.8 lb Best for a stainless finish
Fat Daddio's TT-1255 Revolving Cake Stand Fat Daddio's not published 3.97 lb Best for a single-piece stand

Each pick in detail

What the listing says for it, and against it.
1 Best for a narrow counter

Riccle 12 Inch Pink Aluminum Alloy Revolving Cake St...

Publishes a 7.0 inch width and a 12.0 inch depth, matched only by the himaly at 7.0 inches.

  • For it
  • Publishes a 7.0 inch width, equal smallest of the five with the himaly
  • Maker states hidden stainless steel ball bearings for 360 degree rotation
  • Maker states guiding lines on the plate for positioning a cake or board
  • Maker states a non-slip rubber surface
  • Against it
  • At 5.05 lb it is the heaviest of the five picks
  • Maker does not publish a diameter figure separate from the 12 inch size label
2 Best for guided placement

Ateco Revolving Cake Decorating Stand

Maker states a 12 inch round turntable on an aluminum base with a non-slip silicone cap.

  • For it
  • Maker states an aluminum base and turntable with stainless steel ball bearings
  • Maker states a non-slip silicone cap on the base
  • Maker states a 12 inch diameter round turntable
  • Maker states a family run company since 1905
  • Against it
  • Maker states the turntable stands 4 inches high while the listing publishes 5.0 inches
  • Maker states wipe with a damp cloth only, do not submerge
3 Best for a light stand

Cake Stand Rotating 12"

Publishes 2.0 lb with a 7.0 inch width and a 12.2 inch depth.

  • For it
  • Publishes 2.0 lb, lighter than the RICCLE, Ateco and Fat Daddio's picks
  • Maker states a non-slip surface and rubber feet
  • Maker states stainless steel ball bearings for 360 degree rotation
  • Maker states a 12.2 by 7.0 by 5.3 inch size
  • Against it
  • Maker states a 2000 g net weight, which does not match the published 2.0 lb
  • Maker states the plate and stand are stainless steel while the title says aluminum
4 Best for a stainless finish

Winco Stainless Steel Round Cake Stand

Maker states stainless steel construction with a round 13 inch design.

  • For it
  • Publishes 1.8 lb, the lightest of the five picks
  • Maker states stainless steel for corrosion resistance
  • Maker states easy assembly
  • Maker states a round design with display space
  • Against it
  • Publishes a 13.0 inch width and a 13.0 inch depth, the largest of the five picks
  • Maker does not state bearings or a rotating mechanism
5 Best for a single-piece stand

Fat Daddio's TT-1255 Revolving Cake Stand

Maker states only the name, with a published 12.0 by 12.0 inch footprint.

  • For it
  • Publishes 12.0 by 12.0 inches, matching the Ateco footprint
  • Publishes 3.97 lb
  • Maker states the product name only, with no extra claims
  • Published height of 5.0 inches matches the Ateco
  • Against it
  • Maker does not publish a size label
  • Maker does not state bearings, a base cap or a plate material

Our verdict

For small layer cakes the constraint is the counter footprint, so the published width and depth matter more than the plate. The RICCLE publishes a 7.0 inch width and a 12.0 inch depth, the smallest width of the five alongside the himaly, and its maker states guiding lines on the plate. The himaly publishes a 7.0 inch width and a 12.2 inch depth at 2.0 lb. The Ateco and Fat Daddio's each publish 12.0 by 12.0 inches. The Winco publishes 13.0 by 13.0 inches at 1.8 lb, the lightest of the five.

“A small cake needs a small footprint, not a bigger plate.”

Lush Editorial Team

What separates these five

Footprint first The RICCLE and himaly each publish a 7.0 inch width, which leaves more counter than the 12.0 inch and 13.0 inch widths of the other three.
Rotation stated The RICCLE, Ateco and himaly each state stainless steel ball bearings. The Winco and Fat Daddio's do not state a bearing type.
Grip stated The RICCLE states a non-slip rubber surface, the Ateco states a non-slip silicone cap and the himaly states rubber feet.
Weight range Published weights run from 1.8 lb for the Winco to 5.05 lb for the RICCLE, a spread of 3.25 lb.
What is missing Three of the five publish no width, depth or height at all, so they cannot be ranked on footprint from the sheet.

How we chose

Priorities, not a computed score. The inputs are published specifications, so we rank by what matters most and say how much.

  1. 30% Published width and depthFor a small layer cake the counter footprint is the binding constraint, and these are the only two figures that state it.
  2. 25% Stated rotationA revolving stand is bought for the spin, so a stated bearing type and rotation range carries weight.
  3. 20% Stated gripA non-slip surface, cap or feet is what the maker states keeps a small cake in place.
  4. 15% Published weightA stated weight matters when the stand is lifted in and out of a cabinet.
  5. 10% Stated plate sizeThe stated diameter tells a reader whether a small cake sits comfortably on the top.

How the Five Compare on the Numbers

For small layer cakes the plate is rarely the problem. The base is. A 12 inch top holds a 6 inch cake with room to spare, but the stand still occupies counter, and the published width is the figure that states how much. The RICCLE and himaly each publish a 7.0 inch width. The Ateco and Fat Daddio’s publish 12.0 inches. The Winco publishes 13.0 inches, the largest width of the five picks.

Depth separates the RICCLE and himaly, which share a 7.0 inch width. The RICCLE publishes a 12.0 inch depth and the himaly publishes 12.2 inches, a difference of 0.2 inch. Published weights run from 1.8 lb for the Winco to 5.05 lb for the RICCLE. The Ateco and Fat Daddio’s sit in the middle at 4.8 lb and 3.97 lb.

Specification RICCLE Ateco himaly Winco Fat Daddio’s
Published width 7.0 in 12.0 in 7.0 in 13.0 in 12.0 in
Published depth 12.0 in 12.0 in 12.2 in 13.0 in 12.0 in
Published height 3.7 in 5.0 in 5.3 in 6.0 in 5.0 in
Published weight 5.05 lb 4.8 lb 2.0 lb 1.8 lb 3.97 lb
Stated plate size 12 in 12 in 12.2 in 13 in not published
Stated bearing type Stainless steel ball Stainless steel ball Stainless steel not published not published
Stated grip Non-slip rubber surface Non-slip silicone cap Rubber feet not published not published
Stated plate material Aluminum alloy Aluminum Stainless steel Stainless steel not published
Stated rotation range 360 degrees not published 360 degrees not published not published

The table does not tell you how any of these stands feels in use. Nobody at Lush has handled them, and no figure here describes performance. A stated bearing type is a claim by the maker, not a measurement. The published height is one of three dimensions and the sheet does not say which one is the object height, so treat it as a figure to compare, not as a confirmed measurement of the stand.

Footprint and the Small Cake

Why width and depth carry the decision

A small layer cake, say 6 inches across, leaves a wide margin on a 12 inch plate. The plate is not the constraint. The base is. The RICCLE and himaly each publish a 7.0 inch width, which is 5.0 inches less than the Winco at 13.0 inches and 5.0 inches less than the Ateco and Fat Daddio’s at 12.0 inches. That is the whole argument for putting them first on a narrow counter.

Depth narrows the field further. The RICCLE publishes 12.0 inches and the himaly 12.2 inches, a difference of 0.2 inch. The Ateco and Fat Daddio’s each publish 12.0 inches. The Winco publishes 13.0 inches. If the counter is shallow, the RICCLE, Ateco and Fat Daddio’s share the same published depth, and the width is what separates them.

What the weight figures say

The Winco publishes 1.8 lb, the lightest of the five picks. The himaly publishes 2.0 lb, a difference of 0.2 lb from the Winco. The Fat Daddio’s publishes 3.97 lb, the Ateco 4.8 lb and the RICCLE 5.05 lb, the heaviest of the five. A heavier stand is not automatically steadier, and the sheet makes no claim about stability for any of them.

Weight matters when the stand is lifted in and out of a cabinet. A 1.8 lb stand is easier to move than a 5.05 lb one, and the difference is 3.25 lb. For a stand that stays on the counter, the published width and depth decide more than the weight does. For a stand that travels to a class, the weight is the figure to read first.

Rotation and Grip as Stated

Bearing claims

The RICCLE states hidden stainless steel ball bearings and a full 360 degree rotation. The Ateco states an aluminum base and turntable with stainless steel ball bearings. The himaly states stainless steel bearings and 360 degree rotation. The Winco and Fat Daddio’s do not state a bearing type, so nothing can be said about how they turn. A stated bearing is a maker claim, not a measured result.

For a small layer cake the rotation matters less than it does for a tall tiered cake, because the decorator reaches less far across the plate. Even so, a stated bearing type is the only published evidence that a stand revolves at all. Three of the five state one. Two do not, and that is a real difference in what the sheet supports.

Grip claims

The RICCLE states a non-slip rubber surface and guiding lines on the plate for positioning a cake or board. The Ateco states a non-slip silicone cap on the base. The himaly states a non-slip surface and rubber feet. The Winco and Fat Daddio’s do not state a grip feature. For a small cake, which is light, a stated non-slip surface is the feature that the maker says keeps it from sliding.

The RICCLE is the only one of the five that states guiding lines. That is a positioning aid, not a performance claim, and it is the kind of feature that matters when a small cake has to sit centered on a 12 inch plate. The Ateco and himaly state grip but not lines. The Winco and Fat Daddio’s state neither.

Which One Fits Your Kitchen

Narrow counter, small cakes. The RICCLE publishes a 7.0 inch width and a 12.0 inch depth, the smallest width of the five alongside the himaly, and states guiding lines on the plate. It is also the heaviest at 5.05 lb, so it suits a stand that stays put.

Counter with room to spare, guided placement. The Ateco publishes 12.0 by 12.0 inches and states a non-slip silicone cap and stainless steel ball bearings. Its stated 12 inch round turntable matches the plate size of the RICCLE and himaly.

Stand that moves between kitchens. The himaly publishes 2.0 lb with a 7.0 inch width and a 12.2 inch depth. Against the 1.8 lb Winco it is 0.2 lb heavier, and against the 5.05 lb RICCLE it is 3.05 lb lighter. It states rubber feet.

Lightest stand of the five. The Winco publishes 1.8 lb, the lightest of the five, with a 13.0 inch width and a 13.0 inch depth. It states stainless steel construction and easy assembly, and it does not state a bearing type.

Single-piece stand with a stated footprint. The Fat Daddio’s publishes 12.0 by 12.0 inches at 3.97 lb. Its feature list states the product name only, so a reader who wants a stand with no extra claims published has one option here.

What We Could Not Verify

Several figures that would settle this comparison are not on the sheet.

  • None of the five publishes a weight capacity for the plate, so no stacked cake can be planned against a stated limit.
  • The Ohuhu publishes no weight at all, and the sheet gives no figure to substitute.
  • The Winco and Fat Daddio’s do not state a bearing type or a rotation range.
  • The Fat Daddio’s publishes no plate diameter and no plate material.
  • The Ateco states a 4 inch height in its features while the listing publishes 5.0 inches, and the sheet does not say which is the object height.
  • The himaly states a 2000 g net weight while the listing publishes 2.0 lb, and the sheet does not reconcile the two.

Frequently asked questions

Why does the counter footprint decide this choice?+

A small layer cake does not need a wide plate, but the base still takes up counter. The RICCLE and himaly each publish a 7.0 inch width, while the Ateco and Fat Daddio's publish 12.0 inches and the Winco publishes 13.0 inches. On a narrow counter that difference is the whole decision.

Which of the five is the lightest?+

The Winco publishes 1.8 lb, the lightest of the five picks. The himaly publishes 2.0 lb, the Fat Daddio's publishes 3.97 lb, the Ateco publishes 4.8 lb and the RICCLE publishes 5.05 lb, the heaviest of the five. The spread between the lightest and heaviest is 3.25 lb.

Do all five state a bearing type?+

No. The RICCLE states hidden stainless steel ball bearings, the Ateco states stainless steel ball bearings and the himaly states stainless steel bearings. The Winco and the Fat Daddio's do not state a bearing type on the sheet, so nothing can be said about how they rotate.

What does the Fat Daddio's publish?+

The Fat Daddio's publishes a 12.0 inch width, a 12.0 inch depth, a 5.0 inch height and a weight of 3.97 lb. Its feature list states the product name only, so no bearing, grip or plate material is published. The footprint matches the Ateco exactly.

Why are some listings on the fact sheet left off?+

Because they publish no width, no depth and no height, so no footprint figure exists to compare them on. Some publish a weight and nothing else, and one publishes neither a weight nor a dimension. On a page decided by the counter footprint a stand takes up, a listing with no dimensions cannot be ranked at all, so the five here are the ones that publish all three figures.

Does a stated height tell me how tall the stand is?+

Not reliably. The listing publishes a length, a width and a height, and which of those is the height of the object is not stated. The Ateco states a 4 inch height in its features while the listing publishes 5.0 inches. Treat a published height as one dimension among three, not as a confirmed object height.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.