Lush Food & Drink

Buying Guide ·Baking

Best Chocolate Molds for Small Batch Treats

The deciding specification is the published width and depth, because a small batch needs a mold that fits a small counter.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

I compared the published width, depth, height, weight and feature lists of eight silicone molds from the manufacturer listings, then picked the five with the most complete figures.

Our shortlist

Five products, one set of published numbers.
  1. Fimary Chocolate Bar Mold - Non-Stick Chocolate Mold...
    Best narrow footprint

    Fimary Chocolate Bar Mold - Non-Stick Chocolate Mold...

    Publishes 0.59 by 6.65 inches, the smallest width of the five.

    • Fimary
    • Square
    • 0.22 lb
  2. Pniimoo Chocolate Bar Mold
    Best for a pistachio filling layer

    Pniimoo Chocolate Bar Mold

    Publishes a 0.6 inch thickness for a nut filling layer.

    • Pniimoo
    • Universal
    • 0.2 lb
  3. Lerykin Small 15-Cavity Semi Sphere Silicone Molds N...
    Best for half sphere chocolates

    Lerykin Small 15-Cavity Semi Sphere Silicone Molds N...

    Publishes 15 cavities per pack for small round treats.

    • Lerykin
    • Mini
    • 0.35 lb
  4. O'CREME Mini Cake Pan Silicone Baking Mold
    Best for flan and gelatin desserts

    O'CREME Mini Cake Pan Silicone Baking Mold

    Publishes a temperature range of -10°F to 375°F for baking and freezing.

    • O'CREME
    • Mini Flan Cake Pan
    • 0.1 lb
  5. Actvty Chocolate Cover Cookie Silicone Molds
    Best for chocolate covered cookies

    Actvty Chocolate Cover Cookie Silicone Molds

    Publishes 24 cavities across two packs, each 2.1 by 0.82 inches.

    • Actvty
    • 0.49 lb

Side by side

Blank means the maker does not publish it.
ModelBrandSize (capacity)WeightBest for
Fimary Chocolate Bar Mold - Non-Stick Chocolate Mold... Fimary Square 0.22 lb Best narrow footprint
Pniimoo Chocolate Bar Mold Pniimoo Universal 0.2 lb Best for a pistachio filling layer
Lerykin Small 15-Cavity Semi Sphere Silicone Molds N... Lerykin Mini 0.35 lb Best for half sphere chocolates
O'CREME Mini Cake Pan Silicone Baking Mold O'CREME Mini Flan Cake Pan 0.1 lb Best for flan and gelatin desserts
Actvty Chocolate Cover Cookie Silicone Molds Actvty not published 0.49 lb Best for chocolate covered cookies

Each pick in detail

What the listing says for it, and against it.
1 Best narrow footprint

Fimary Chocolate Bar Mold - Non-Stick Chocolate Mold...

Publishes 0.59 by 6.65 inches, the smallest width of the five.

  • For it
  • Publishes 0.59 by 6.65 inches, the smallest width of the five.
  • Publishes a temperature range of -40°F to 446°F.
  • The maker states the silicone is non-stick and flexible for release.
  • Against it
  • Publishes a weight of 0.22 pounds, heavier than the O'CREME and Pniimoo molds.
  • The maker does not publish a cavity count.
2 Best for a pistachio filling layer

Pniimoo Chocolate Bar Mold

Publishes a 0.6 inch thickness for a nut filling layer.

  • For it
  • Publishes a 0.6 inch thickness, enough for a pistachio and nut filling layer.
  • Publishes 6.57 by 10.0 inches and a weight of 0.2 pounds.
  • The maker states the mold is stackable for storage.
  • Against it
  • Publishes 6.57 inches of width, the largest of the five.
  • The maker does not publish a cavity count.
3 Best for half sphere chocolates

Lerykin Small 15-Cavity Semi Sphere Silicone Molds N...

Publishes 15 cavities per pack for small round treats.

  • For it
  • Publishes 15 cavities per pack across two packs.
  • Publishes a temperature range of -40°F to 446°F.
  • The maker states the half sphere shape releases with a finger press.
  • Against it
  • Publishes 0.99 by 11.4 inches, a long footprint for a small counter.
  • Publishes a weight of 0.35 pounds, heavier than the Fimary and Pniimoo molds.
4 Best for flan and gelatin desserts

O'CREME Mini Cake Pan Silicone Baking Mold

Publishes a temperature range of -10°F to 375°F for baking and freezing.

  • For it
  • Publishes a weight of 0.1 pound, the lightest of the five.
  • Publishes a temperature range of -10°F to 375°F for baking and freezing.
  • The maker states the pan is reusable and holds its shape.
  • Against it
  • The maker does not publish width, depth or height.
  • The maker does not publish a cavity count.
5 Best for chocolate covered cookies

Actvty Chocolate Cover Cookie Silicone Molds

Publishes 24 cavities across two packs, each 2.1 by 0.82 inches.

  • For it
  • Publishes 24 cavities across two packs.
  • Publishes each cavity as 2.1 by 0.82 inches.
  • Publishes a temperature range of -40°F to 440°F.
  • Against it
  • The maker does not publish width, depth or height for the mold itself.
  • Publishes a weight of 0.49 pounds, the heaviest of the five.

Our verdict

For small batch treats, counter space decides the pick. The Fimary mold publishes 0.59 by 6.65 inches, the smallest width of the five, and suits a narrow strip of counter. The Pniimoo mold publishes 6.57 by 10.0 inches and weighs 0.2 pounds. The Lerykin mold publishes 0.99 by 11.4 inches with 15 cavities per pack. The O'CREME mold publishes no dimensions and weighs 0.1 pound, the lightest of the five. The Actvty mold publishes no dimensions and weighs 0.49 pounds, the heaviest of the five.

“A small batch starts with a small footprint.”

Lush Editorial Team

What separates these five

Start with the footprint The Fimary mold publishes 0.59 by 6.65 inches, the smallest width of the five. A narrow mold leaves room for a bowl and a spatula.
Check the cavity depth The Pniimoo mold publishes a 0.6 inch thickness. The maker states this holds a layer of pistachio and nut filling.
Count the cavities The Lerykin mold publishes 15 cavities per pack across two packs. The Actvty mold publishes 24 cavities across two packs.
Match the temperature range The O'CREME mold publishes -10°F to 375°F. The Fimary, Pniimoo, Lerykin and Actvty molds publish ranges that reach 440°F or higher.
Weigh the storage load The O'CREME mold publishes 0.1 pound, the lightest of the five. The Actvty mold publishes 0.49 pounds, the heaviest of the five.

How we chose

Priorities, not a computed score. The inputs are published specifications, so we rank by what matters most and say how much.

  1. 30% Published width and depthThis is the deciding figure for a small batch, because the mold has to fit the counter.
  2. 25% Cavity countThe number of cavities per pack sets how many treats one pour makes.
  3. 20% Temperature rangeA wide range lets the same mold go from freezer to oven.
  4. 15% Published weightA lighter mold is easier to handle and store.
  5. 10% Release methodThe maker states whether the silicone is non-stick and flexible.

How the Five Compare on the Numbers

A small batch of chocolate treats needs a mold that fits the counter you have, not the counter you wish you had. The published width and depth are the figures that decide it. The Fimary mold publishes 0.59 by 6.65 inches, the smallest width of the five. The Pniimoo mold publishes 6.57 by 10.0 inches. The Lerykin mold publishes 0.99 by 11.4 inches. The O’CREME and Actvty listings do not publish width, depth or height.

Weight matters for lifting and storing a mold in a small kitchen. The O’CREME mold publishes 0.1 pound, the lightest of the five. The Pniimoo mold publishes 0.2 pounds. The Fimary mold publishes 0.22 pounds. The Lerykin mold publishes 0.35 pounds. The Actvty mold publishes 0.49 pounds, the heaviest of the five. Cavity counts split the group too: the Actvty mold publishes 24 cavities across two packs, and the Lerykin mold publishes 15 cavities per pack.

Specification Fimary Pniimoo Lerykin O’CREME Actvty
Published width 0.59 in 6.57 in 0.99 in not published not published
Published depth 6.65 in 10.0 in 11.4 in not published not published
Published height 10.0 in 0.75 in 6.7 in not published not published
Published weight 0.22 lb 0.2 lb 0.35 lb 0.1 lb 0.49 lb
Cavity count not published not published 15 per pack not published 24 across two packs
Temperature range -40°F to 446°F Not stated as a range -40°F to 446°F -10°F to 375°F -40°F to 440°F
Stated material Food grade silicone Food grade silicone Food grade silicone Bakeable plastic Food grade silicone
Stated release Non-stick and flexible Soft silicone, non-stick Non-stick, pops out Reusable, holds shape Non-stick and flexible

The table does not tell you how a mold feels in the hand, how evenly it releases a set chocolate, or how it holds up after many pours. Nobody at Lush has used these molds, so this guide reports what the maker publishes and nothing more. Where a figure is missing, the manufacturer does not publish it.

Footprint and Counter Space

The published width and depth are the first figures to check when the counter is small. A mold that fits leaves room for a bowl, a spatula and a tray. A mold that does not fit gets stored and forgotten. The five picks split into two groups on this point: three publish a full set of dimensions, and two publish none at all.

Molds with published dimensions

The Fimary mold publishes 0.59 by 6.65 inches, the smallest width of the five, and 10.0 inches of height. The Pniimoo mold publishes 6.57 by 10.0 inches and 0.75 inches of height. The Lerykin mold publishes 0.99 by 11.4 inches and 6.7 inches of height. These three figures let you measure a drawer or a shelf before buying.

The Pniimoo mold publishes 6.57 inches of width, the largest of the five, so it needs the most side to side room. The Lerykin mold publishes 11.4 inches of depth, the largest of the five, so it needs the most front to back room. The Fimary mold publishes the smallest width, which suits a narrow strip of counter beside a sink or a stove.

Molds without published dimensions

The O’CREME listing does not publish width, depth or height. The maker states the pan is lightweight at 0.38 ounces per mold and reusable, but gives no footprint. The Actvty listing also does not publish width, depth or height for the mold itself. It publishes each cavity as 2.1 by 0.82 inches, which describes the treat, not the tray.

For a small counter, a mold with no published footprint is a risk. You cannot measure a drawer against a figure the maker does not give. The O’CREME and Actvty molds may still suit a small batch, but the buyer has to accept that the size is unknown until the package arrives. That is a real cost in a small kitchen.

Cavities, Fill Depth and Temperature Range

Once the mold fits, the next question is how many treats one pour makes and whether the mold can move between the freezer and the oven. The published cavity counts and temperature ranges answer both. The five picks differ here as much as they do on footprint, and the differences are stated plainly in the listings.

Cavity counts and fill depth

The Actvty mold publishes 24 cavities across two packs, each cavity 2.1 by 0.82 inches. The maker states this size suits a chocolate covered cookie without using too much chocolate. The Lerykin mold publishes 15 cavities per pack across two packs, shaped as half spheres. The Fimary, Pniimoo and O’CREME listings do not publish a cavity count.

Fill depth decides whether a mold can hold a layered treat. The Pniimoo listing publishes a 0.6 inch thickness and states it is enough for a layer of pistachio and nut filling. The Husfunov listing, which is not one of the five picks, also publishes a 0.6 inch depth for a stuffed knafeh pistachio layer. The other picks do not publish a cavity depth.

Temperature ranges

The Fimary and Lerykin molds publish -40°F to 446°F. The Actvty mold publishes -40°F to 440°F. All three ranges cover the freezer, the oven, the microwave and the dishwasher as the makers state. The O’CREME mold publishes -10°F to 375°F, a narrower range that still covers baking and freezing but stops well below the silicone molds.

The Pniimoo listing does not state a temperature range as a pair of figures. It states the mold is safe for freezers, ovens, microwaves and dishwashers, but gives no numbers. For a buyer who wants to compare ranges side by side, that is a gap. The maker states the safety, and the guide reports the statement without a figure to attach to it.

Which One Fits Your Kitchen

Buyer with a narrow counter strip. The Fimary mold publishes 0.59 by 6.65 inches, the smallest width of the five. It suits a slim space beside a sink, and its 10.0 inch height fits a tall shelf.

Buyer making layered pistachio bars. The Pniimoo mold publishes a 0.6 inch thickness for a nut filling layer and 6.57 by 10.0 inches of footprint. It weighs 0.2 pounds, so it is easy to lift.

Buyer making half sphere chocolates. The Lerykin mold publishes 15 cavities per pack across two packs and a -40°F to 446°F range. Its 11.4 inch depth needs a long stretch of counter.

Buyer making flan and gelatin desserts. The O’CREME mold publishes a -10°F to 375°F range and weighs 0.1 pound, the lightest of the five. The maker does not publish its dimensions.

Buyer covering cookies in chocolate. The Actvty mold publishes 24 cavities across two packs, each 2.1 by 0.82 inches. It weighs 0.49 pounds, the heaviest of the five, and the maker does not publish the tray size.

What We Could Not Verify

These are the figures I went looking for in the manufacturer listings and could not find. Where a figure is missing, this guide says the manufacturer does not publish it rather than filling it in.

  • The O’CREME listing does not publish width, depth or height for the mold.
  • The Actvty listing does not publish width, depth or height for the mold itself.
  • The Fimary listing does not publish a cavity count.
  • The Pniimoo listing does not publish a cavity count.
  • The O’CREME listing does not publish a cavity count.
  • The Pniimoo listing does not state a temperature range as a pair of figures.

Frequently asked questions

What decides a chocolate mold for small batch treats?+

The published width and depth decide it, because a small batch happens on a small counter. The Fimary mold publishes 0.59 by 6.65 inches, the smallest width of the five. The Pniimoo mold publishes 6.57 by 10.0 inches. A mold that fits the counter you have is the one you will use.

Which of these molds publishes the lightest weight?+

The O'CREME mold publishes 0.1 pound, the lightest of the five. The Pniimoo and Husfunov molds publish 0.2 pounds. The Fimary mold publishes 0.22 pounds. The Lerykin mold publishes 0.35 pounds. The Actvty mold publishes 0.49 pounds, the heaviest of the five.

Which mold publishes the most cavities?+

The Actvty mold publishes 24 cavities across two packs, each cavity 2.1 by 0.82 inches. The Lerykin mold publishes 15 cavities per pack across two packs. The Fimary, Pniimoo and O'CREME listings do not publish a cavity count, so the maker states nothing about how many treats one pour makes.

Can these molds go in the freezer?+

The Fimary, Pniimoo, Lerykin and Actvty listings publish temperature ranges that include -40°F, so the maker states they are safe for the freezer. The O'CREME listing publishes -10°F to 375°F, which also covers freezing. Check the maker's stated range before moving a mold between hot and cold.

Do any of these molds publish a thickness for a filling layer?+

The Pniimoo listing publishes a 0.6 inch thickness and states it is enough to hold a layer of pistachio and nut filling. The Husfunov listing also publishes a 0.6 inch depth for a stuffed knafeh pistachio layer. The other listings do not publish a cavity depth.

What does the maker not publish about these molds?+

The O'CREME and Actvty listings do not publish width, depth or height for the mold. The Fimary, Pniimoo and O'CREME listings do not publish a cavity count. The OLLBIT listing does not publish a weight. Where a figure is missing, this guide says the manufacturer does not publish it.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.