Lush Food & Drink
Buying Guide

Best Dish Drying Racks for a Kitchen Starter Kit

The deciding specification is how many separate components one purchase brings and how many of them come off again, because one is a four part modular system and one describes a lid and a tray and then says the package holds a single item.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

I compared the components each maker names against which of them it states are removable, the assembly claims, the stated sizes in both units where two are given, and the published weights, across five dish drying racks using only each maker's own published text.

Our Shortlist

Same Numbers. A Clearer Choice.
Best for parts you can take off and rearrange
Urackify Stainless Steel Dish Drying Rack for Kitche...

Urackify Stainless Steel Dish Drying Rack for Kitche...

Four components stated by name: the main rack, a three slot utensil holder, a detachable cup shelf and a removable drain board, with the listing stating that all components are detachable so the cup shelf can come off to make room for a pot. In 304 stainless steel, with the only support figure on this page, a plate support height of 6.2 inches given also as 157 mm. Published fields of 12.99 by 17.24 by 5.7 inches.

  • Large
  • (not listed)
Check Price
Best for hanging knives and holding lids
Tiardocge Covered Plastic Dish Drying Rack

Tiardocge Covered Plastic Dish Drying Rack

The longest component list here: two tiers, a pot lid rack, three-in-one hooks on the side for knives, a recessed top for spice jars, a cover lid, a removable drainboard and a transparent flip that stays open on its own. Made of PP, stated at 33 by 28 by 41 cm and given as 12.99 by 10.63 by 16.14 inches, which is not the same middle figure in both units.

  • 33*28*41cm/12.99*10.63*16.14in
  • (not listed)
Check Price
Best for a rack you assemble without tools
Kitsure Dish Drying Rack for Kitchen Counter

Kitsure Dish Drying Rack for Kitchen Counter

The only listing that states its own parts list as a sentence: the rack consists of a cutlery holder, a dish rack and a drainboard set, with such a simple structure that it installs without a tool. The cutlery holder is detachable and divided into two spaces, and the water pipe can be disassembled for cleaning. A bottom layer of 12 inches by 15.5 and a stated overall height of 5 inches, at 2.65 pounds.

  • 12''W x 15.5''L - 1 Tier
  • 2.65 lb
Check Price
Best for lifting a full rack by the handles
jouzevic Small Dish Drying Rack

jouzevic Small Dish Drying Rack

The only pick here with wooden handles, stated to make it easy to move around, on a thickened metal frame with a dip coating the maker says minimizes corrosion in regular kitchen humidity. A removable drainboard is the only detachable part named. Single layer, sized for two to four people by its own label, at 2.76 pounds and published fields of 16.93 by 12.01 by 5.51 inches.

  • 2-4 Person
  • 2.76 lb
Check Price
Best for keeping dust off dry dishes
BESTonZON Dish Drying Rack with Lid Dish Drainer wit...

BESTonZON Dish Drying Rack with Lid Dish Drainer wit...

A transparent lid over a PP basket with a detachable drip tray, which is the only covered rack here small enough to publish 12.97 by 10.22 by 7.07 inches in its own words. Read its last bullet before buying: after describing a lid and a tray, it states that the package includes one dish drying rack. Its published weight field is not credible for this object and is left out.

  • 33X26X18CM
  • (not listed)
Check Price

Side by Side Comparison

ModelBrandSize (Capacity)WeightBest For
Urackify Stainless Steel Dish Drying Rack for Kitche... Urackify Large Not listed Best for parts you can take off and rearrange
Tiardocge Covered Plastic Dish Drying Rack Tiardocge 33*28*41cm/12.99*10.63*16.14in Not listed Best for hanging knives and holding lids
Kitsure Dish Drying Rack for Kitchen Counter Kitsure 12''W x 15.5''L - 1 Tier 2.65 lb Best for a rack you assemble without tools
jouzevic Small Dish Drying Rack jouzevic 2-4 Person 2.76 lb Best for lifting a full rack by the handles
BESTonZON Dish Drying Rack with Lid Dish Drainer wit... BESTonZON 33X26X18CM Not listed Best for keeping dust off dry dishes

Each Pick in Detail

1 Best for parts you can take off and rearrange
Urackify Stainless Steel Dish Drying Rack for Kitche...

Urackify Stainless Steel Dish Drying Rack for Kitche...

Four components stated by name: the main rack, a three slot utensil holder, a detachable cup shelf and a removable drain board, with the listing stating that all components are detachable so the cup shelf can come off to make room for a pot. In 304 stainless steel, with the only support figure on this page, a plate support height of 6.2 inches given also as 157 mm. Published fields of 12.99 by 17.24 by 5.7 inches.

  • Names four components and states every one of them detaches
  • A three slot utensil holder, which no other pick here divides that far
  • Publishes a plate support height of 6.2 inches, given also as 157 mm
  • Publishes no weight at all, so what has to be lifted is unstated
  • States most buyers finish assembly in 10 to 15 minutes, the longest here
Check Price
2 Best for hanging knives and holding lids
Tiardocge Covered Plastic Dish Drying Rack

Tiardocge Covered Plastic Dish Drying Rack

The longest component list here: two tiers, a pot lid rack, three-in-one hooks on the side for knives, a recessed top for spice jars, a cover lid, a removable drainboard and a transparent flip that stays open on its own. Made of PP, stated at 33 by 28 by 41 cm and given as 12.99 by 10.63 by 16.14 inches, which is not the same middle figure in both units.

  • The longest list of parts on this page, from a lid rack to side hooks
  • A recessed top stated to hold spice jars, which nothing else offers
  • States it can be disassembled to clean the interior separately
  • Its own two units disagree: 28 cm is not the 10.63 inches it publishes
  • Publishes no weight, on a two tier unit it states at 16.14 inches
Check Price
3 Best for a rack you assemble without tools
Kitsure Dish Drying Rack for Kitchen Counter

Kitsure Dish Drying Rack for Kitchen Counter

The only listing that states its own parts list as a sentence: the rack consists of a cutlery holder, a dish rack and a drainboard set, with such a simple structure that it installs without a tool. The cutlery holder is detachable and divided into two spaces, and the water pipe can be disassembled for cleaning. A bottom layer of 12 inches by 15.5 and a stated overall height of 5 inches, at 2.65 pounds.

  • States its parts list plainly: cutlery holder, dish rack, drainboard
  • Installs with no tool needed, which the listing states twice
  • The cutlery holder is detachable and split into two spaces
  • A plastic drainboard under a metal rack, so two materials to maintain
  • Warns water may not drain smoothly if the sink edge sits above the counter
Check Price
4 Best for lifting a full rack by the handles
jouzevic Small Dish Drying Rack

jouzevic Small Dish Drying Rack

The only pick here with wooden handles, stated to make it easy to move around, on a thickened metal frame with a dip coating the maker says minimizes corrosion in regular kitchen humidity. A removable drainboard is the only detachable part named. Single layer, sized for two to four people by its own label, at 2.76 pounds and published fields of 16.93 by 12.01 by 5.51 inches.

  • Wooden handles stated to make the rack easy to move
  • A removable drainboard that detaches for cleaning
  • Dip coating stated to minimize corrosion in kitchen humidity
  • Only one detachable part is named, against four on the modular pick
  • No cutlery holder, cup shelf or lid is mentioned anywhere
Check Price
5 Best for keeping dust off dry dishes
BESTonZON Dish Drying Rack with Lid Dish Drainer wit...

BESTonZON Dish Drying Rack with Lid Dish Drainer wit...

A transparent lid over a PP basket with a detachable drip tray, which is the only covered rack here small enough to publish 12.97 by 10.22 by 7.07 inches in its own words. Read its last bullet before buying: after describing a lid and a tray, it states that the package includes one dish drying rack. Its published weight field is not credible for this object and is left out.

  • A transparent lid stated to keep dust off stored dishes
  • A detachable drip tray, stated to help the rack dry faster
  • Publishes 12.97 by 10.22 by 7.07 inches in its own sentence
  • Its final bullet states the package includes one dish drying rack
  • Its published weight field cannot describe this object and is unusable
Check Price

Our Verdict

Urackify names four parts and states all of them detach. Tiardocge names two tiers, a pot lid rack, side hooks, a recessed top, a cover and a removable drainboard. Kitsure names a cutlery holder, a rack and a drainboard. jouzevic names a removable drainboard and wooden handles. BESTonZON describes a lid and a tray and then states the package includes one dish drying rack.

“One listing describes three parts and ships one item.”

Lush Food & Drink
Good Food
Brighter Days

What Separates These Five

From one part to seven Urackify names four components and Tiardocge names seven features across tiers, hooks, a lid rack and a top. jouzevic names a drainboard and handles.
Only one says everything detaches Urackify states that all components are detachable and gives an example: take the cup shelf off when a big pot needs the space.
One parts list contradicts itself BESTonZON describes a transparent lid and a detachable drip tray, then closes by stating that the package includes one dish drying rack.
One unit pair that does not convert Tiardocge publishes 33 by 28 by 41 cm and 12.99 by 10.63 by 16.14 inches. The 28 cm figure is 11.02 inches, not 10.63.
One support height in five Urackify publishes a plate support height of 6.2 inches, given also as 157 mm, and warns that smaller plates may slip. Nobody else publishes one.

How We Chose

Components named
Detachable parts named
Cutlery holder included
Lid or cover included
Support height published
Assembly statement

Frequently Asked Questions

How many pieces do these actually arrive as?+

Between two and seven by the makers' own lists. Tiardocge names two tiers, a pot lid rack, side hooks, a recessed top, a cover and a removable drainboard. Urackify names four detachable components. Kitsure names a cutlery holder, a dish rack and a drainboard. jouzevic names a rack with wooden handles and a removable drainboard. BESTonZON describes three and then says one item ships.

What does BESTonZON's last bullet mean?+

It is the one thing to read before buying it. Four bullets describe a transparent lid that keeps dust off dishes, a detachable drip tray, a PP build and a size of 12.97 by 10.22 by 7.07 inches. The fifth ends with the statement that the package includes one dish drying rack. Either the lid and tray count as part of that one item, or the parts described are not all shipping.

Which of these needs assembling?+

Two say, and they disagree about how much work it is. Kitsure states in two separate bullets that no tool is needed and that an installation manual is attached. Urackify states that most customers complete setup in 10 to 15 minutes with included instructions and hardware, and that no special tools are required. Tiardocge, jouzevic and BESTonZON publish nothing about assembly.

Does any of these tell me what plates will fit?+

One. Urackify publishes a plate support height of 6.2 inches, given also as 157 mm, and warns in the same tip that smaller plates or bowls may not be fully supported and could have an increased risk of slipping. That is a more useful figure than a plate count, and the other four give counts or nothing: Kitsure states 10 plates, Tiardocge two tiers, jouzevic a single layer.

Why does the centimeter figure matter on Tiardocge?+

Because the two units it publishes do not describe the same object. Its size string reads 33 by 28 by 41 cm and then 12.99 by 10.63 by 16.14 inches. The first and third convert correctly, but 28 cm is 11.02 inches and 10.63 inches is 27 cm, so the middle figure is out by a centimeter. On a rack meant for a narrow counter that is the side you would be measuring.

Which publishes the least about itself?+

jouzevic, on components, and Urackify, on figures. jouzevic's five bullets cover wooden handles, thickened metal, a dip coating, a removable drainboard and a single-layer design, with no cutlery holder, cup shelf or lid mentioned and a size label that reads 2-4 Person. Urackify names the most parts and publishes no weight, so you know exactly what arrives and not what it weighs.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.

How the Five Compare on the Numbers

Four live pages on this pool rank by where the rack sits, by published width and depth, by the narrow side against the height and by where the rack sits again. None of them counts the parts. A dish rack is almost never one object, and for a kitchen being equipped from scratch the number of components is the difference between one purchase and three.

Counted that way these five run from two named parts to seven. One states that everything detaches. One states it can be taken apart without naming what. One describes a lid and a tray and then closes by stating that the package includes a single dish drying rack, which is the sort of sentence worth reading before ordering.

Specification Urackify Tiardocge Kitsure jouzevic BESTonZON
Components named Four Seven Three Two Three described
Cutlery holder three slot not published detachable, two spaces not published not published
Cup shelf detachable not published not published not published not published
Lid or cover not published cover lid and flip not published not published transparent lid
Drainboard or tray removable removable plastic, in the set removable detachable
Hooks or lid rack not published three-in-one hooks, lid rack not published not published not published
All parts stated detachable yes can be disassembled cutlery holder and pipe drainboard only drip tray only
Assembly statement 10 to 15 minutes, hardware not published no tool needed not published not published
Plate support height 6.2 in, as 157 mm not published not published not published not published
Size in maker’s words not published 33 x 28 x 41 cm 12 x 15.5 bottom layer not published 12.97 x 10.22 x 7.07 in
Material stated 304 stainless steel PP metal and plastic board thickened metal, dip coated PP
Published weight, lb not published not published 2.65 2.76 not published

What the table cannot tell you is how much water any drainboard or drip tray holds. All five publish one and not one publishes a capacity, a depth or a fill line for it, so how often a full rack has to be emptied is unstated everywhere. That is the single figure a buyer of any of these would notice first in use.

Counting the Parts

Four That Detach and Seven That Are Named

Urackify is the clearest purchase on this page because it counts itself. Its fourth bullet calls the rack a four-in-one modular design and names the four: the main rack for dishes, the utensil holder for cutlery, the cup shelf for mugs and the drain board for extra drying space. It then states that all components are detachable and gives a use for that, which is removing the cup shelf when a big pot needs washing.

Tiardocge names more and commits to less. Across its bullets it describes two tiers, a pot lid rack, three-in-one hooks on the side for knives, a recessed top for spice jars, a cover lid, a removable drainboard and a transparent flip that stays upright on its own. It states that the unit can be disassembled to clean the interior, without saying which parts come apart.

Two Short Lists and One Contradiction

Kitsure writes its parts list as a plain sentence: the drying rack consists of a cutlery holder, a dish rack and a drainboard set. It adds that the cutlery holder is detachable and divided into two spaces and that the water pipe can be disassembled for cleaning, which makes three named parts and two of them removable.

jouzevic names the fewest. Its five bullets give wooden handles, thickened metal, a dip coating, a removable drainboard and a single-layer design. No cutlery holder, no cup shelf, no lid. BESTonZON is the odd one: it describes a transparent lid and a detachable drip tray and then states in its final bullet that the package includes one dish drying rack, leaving the parts count genuinely unclear.

What the Listings Say About Setting It Up

No Tool Needed Against Fifteen Minutes With Hardware

Kitsure is emphatic about it, stating in one bullet that the rack is easy to install with the attached installation manual and in another that its simple structure means no tool is needed in the process. For a rack with three parts that is believable and it is the only listing here that treats assembly as a selling point rather than an afterthought.

Urackify is honest in the other direction. It states that most customers complete setup in 10 to 15 minutes with included instructions and hardware, and that no special tools are required. Hardware means fasteners, and fifteen minutes is the longest setup published on this page. The other three listings say nothing about assembly, which on a two tier plastic cabinet like Tiardocge’s is a question worth asking.

The One Figure That Decides Whether Your Plates Fit

Urackify publishes a plate support height of 6.2 inches, given also as 157 mm, inside a tip that also warns you about it: for optimal stability use dishes taller than 6.2 inches, because smaller plates or bowls may not be fully supported and could have an increased risk of slipping. That is a specification and a caveat in the same sentence.

Nothing else here publishes a support dimension. Kitsure states that the rack holds 10 plates, Tiardocge that two tiers and a pot lid rack store bowls, plates, lids and cutting boards separately, and jouzevic that a single-layer multi-functional design offers ample storage. Those are counts and descriptions rather than the height a plate has to clear.

Where the Published Figures Go Wrong

A Centimeter Figure That Does Not Convert

Tiardocge publishes its size twice in one string: 33 by 28 by 41 cm, then 12.99 by 10.63 by 16.14 inches. Two of those pairs are right. The middle one is not, because 28 cm is 11.02 inches and 10.63 inches is 27 cm. The gap is small and it sits on the side a narrow counter would care about, so this page quotes both figures rather than picking one.

The same listing repeats 12.99 by 10.63 by 16.14 in a separate footprint bullet, so the inch figures are what the maker means to publish. Its dimension fields agree with those inches, which suggests the centimeter string is the one that drifted. Neither reading is confirmed anywhere on the listing.

Two Weights and Three Absences

Kitsure publishes 2.65 pounds and jouzevic 2.76, and those are the only weights on this page that describe the product. Urackify and Tiardocge publish none at all. BESTonZON publishes a figure so small that it cannot belong to a PP basket of 12.97 by 10.22 by 7.07 inches, so it has been left out entirely rather than quoted with a caveat.

BESTonZON’s dimension fields are separately unusable, reading 10.24 by 7.09 by 7.09 inches, which repeats one figure and drops the long side its own sentence gives as 12.97 inches. The maker’s own sentence is the one this page uses, which is also the rule the rest of this pool needs, since three of these five publish their size only in a field.

Which One Fits Your Kitchen

Washing pots as often as plates. Urackify, the only pick that states every component detaches, so the cup shelf comes off when a pan needs the space. Four parts in 304 stainless steel, with a published plate support height of 6.2 inches.

Storing rather than just draining. Tiardocge, with two tiers, a pot lid rack, knife hooks, a spice jar top and a cover. Made of PP at a stated 12.99 by 10.63 by 16.14 inches, with no weight published and a centimeter figure that does not convert.

Setting it up in five minutes. Kitsure, which states twice that no tool is needed, and names its three parts in one sentence. A bottom layer of 12 by 15.5 inches and a 5 inch overall height, at a published 2.65 pounds.

Emptying the rack at the sink. jouzevic, the only pick with wooden handles stated to make it easy to move, with a removable drainboard and a dip coated metal frame. Published at 2.76 pounds and 16.93 by 12.01 by 5.51 inches.

Leaving clean dishes out on show. BESTonZON, a transparent lid over a PP basket with a detachable drip tray at a stated 12.97 by 10.22 by 7.07 inches. Read the final bullet, which states the package includes one dish drying rack.

What We Could Not Verify

Every item below was looked for across all five listings and is not published:

  • Any capacity, depth or fill line for the drainboard or drip tray on any of the five.
  • A weight for Urackify or Tiardocge, and a credible weight for BESTonZON.
  • Whether BESTonZON’s lid and drip tray are inside the one dish drying rack its final bullet describes.
  • Which of Tiardocge’s parts come apart, on a listing that states only that it can be disassembled.
  • Whether Tiardocge’s middle side is 28 cm or 10.63 inches, since those are not the same length.
  • A plate support height on four of the five, so what size plate stands up is unstated.