How the Five Compare on the Numbers
A French press screen is a disc of woven steel thin enough to fold at the rim, and what separates these five is what each maker says stops that happening. IBETTERN and Attsky both state a reinforced center ring. YMMIND states heavy gauge 304 stainless steel. Easyworkz puts a rigid spiral disk behind the mesh, and PRETYZOOM supplies a metal plate and a cross tray as part of a complete plunger head.
The filtration figures split the pool in the same way. IBETTERN and Attsky both state a 100 mesh count, which is the only number here two listings share. YMMIND states a higher density screen holding back 99% of used coffee grounds, a result rather than a count. Easyworkz names four levels of filtration and PRETYZOOM states only that its mesh is fine.
What the table cannot tell you is how thick the wire is in any of these screens. No listing publishes a gauge figure, a thickness or the size of a mesh opening, so the two 100 mesh counts can be compared with each other and with nothing else. The word gauge appears once in this pool, on the listing that publishes no weight.
What Keeps a Thin Disc Flat
Two Listings Publish a Reinforced Center Ring
IBETTERN and Attsky are the only two that name a part rather than a property. IBETTERN states its reinforced center ring prevents mesh deformation, contrasting it with filters that bend easily, and says the screen stays flat and stable while pressing so brewing pressure holds steady. Attsky states the same feature in different words, a unique reinforced center ring that prevents wear and makes the screen last longer.
Neither publishes anything about the ring itself. There is no material, no width and no thickness for it on either listing, so the two claims can be compared only by their presence. Both listings pair the ring with 304 stainless steel for the mesh, and both describe the screen as the part that keeps grounds out of the cup rather than the part that carries load.
A Folded Edge, a Gauge and a Plate
IBETTERN adds a second treatment nothing else here has, stating a 4.5 inch folded edge design that fits most 50 oz presses. A folded rim stiffens a disc at exactly the point a plunger loads it, and it is the only edge detail published in this pool. YMMIND takes the material route instead, stating heavy gauge 304 stainless steel with no figure attached to the word heavy.
Easyworkz and PRETYZOOM sidestep the question. Easyworkz supplies a stainless spiral disk that sits behind the mesh, which is a rigid plate doing the work rather than a stiffened screen. PRETYZOOM supplies a metal plate and a cross tray in the same role, as two of the five parts in a complete plunger head that also includes a lid and a push rod.
Diameter, Mesh Count and Two Figures That Disagree
One Hundred Mesh on Two Listings, a Percentage on a Third
The 100 mesh count on IBETTERN and Attsky is the one specification in this pool that lets two products be compared on the same scale. Both describe it as an ultra fine screen and both attach it to holding back fine grounds for a cleaner cup. Neither says what opening that count corresponds to, and neither states a wire diameter, so the count stands alone.
YMMIND answers a different question, stating a higher density filter screen that holds back 99% of used coffee grounds. That is an outcome and not a specification: it cannot be set against a mesh count, and nothing on the listing says how it was arrived at. Easyworkz and PRETYZOOM give neither a count nor a percentage, only the words four levels and fine.
YMMIND Publishes 3.6 Inches and 3.75 Inches
YMMIND states 3.6 inches in its title, again in its size field and again in the sentence naming the press it fits. Then its last bullet states the parts can be used in both 34 ounce and 3.75 inch wide French presses. Those are two different screens, and on a part that has to drop into a glass beaker and sit flat, the gap between them is more than enough to decide whether it fits or jams above the shoulder.
This page treats 3.6 inches as the stated diameter, because it appears three times and 3.75 once, and it names both because a buyer measuring an old screen needs to know the listing is not consistent. Easyworkz and PRETYZOOM publish no diameter at all, which is a larger gap: they name a press volume and leave the fit to be worked out.
The Two Weights and the Fields That Are Not Cartons
Only Two of Five Publish a Weight
Easyworkz publishes 0.09 pounds and PRETYZOOM 0.12 pounds, and neither figure is one bare disc. The Easyworkz figure covers a spiral disk, a nylon mesh and a steel mesh screen. The PRETYZOOM figure covers a lid, a metal plate, a mesh, a cross tray and a push rod. So the two weights in this pool both describe assemblies, and no listing here weighs a single screen.
The three listings that sell spare discs publish nothing. That is most awkward on YMMIND, whose central build claim is heavy gauge 304 stainless steel: a gauge claim is a claim about how much metal is in the disc, and the listing gives no figure that would show it. Nothing on this page is ranked on weight for that reason.
A Height That Cannot Be a Stack of Four
IBETTERN’s package fields read 4.5 by 4.5 by 0.07 inches. The first two match the 4.5 inch diameter it states, and the third cannot be four screens stacked in a box: 0.07 inches is one thin disc. So that triple describes a single screen rather than the carton the four arrive in, and it is the closest thing to a published thickness anywhere in this pool.
Easyworkz reads the same way at 3.31 by 0.16 by 3.31 inches, which is a disc on its edge rather than a parcel. PRETYZOOM is the opposite case: its only triple is 6.29 by 2.75 by 1.18 inches, given in its title and in centimeters in its size field, and no round screen has those proportions, so that figure is the parcel or the assembled head and not a diameter.
Which One Fits Your Kitchen
You own a 12 cup press. IBETTERN publishes four screens stated at 4.5 inches with a 100 mesh count, a folded edge and a reinforced center ring, for presses it names as 50 oz, 12 cup and 1500 ml. It publishes no weight.
You want spares for a standard 8 cup press. Attsky publishes six screens stated at 4 inches, a 100 mesh count, 304 stainless steel and a reinforced center ring stated to prevent wear, for 1000 ml presses. It publishes no weight and no wire gauge.
You replace screens often and want a deep stock. YMMIND publishes eight heavy gauge 304 screens holding back 99% of used grounds. Check the diameter first: it states 3.6 inches three times and 3.75 inches once, and publishes no weight.
Your plunger assembly is the part that failed. Easyworkz publishes a three piece screw-on kit of a spiral disk, a nylon mesh and a steel mesh at 0.09 pounds, with a 24 month guarantee. It publishes no diameter and no steel grade.
The lid and rod are worn, not just the mesh. PRETYZOOM publishes a whole plunger head of five parts including a cross tray and a push rod, at 0.12 pounds. It publishes no diameter, no mesh count and no press volume, so measure before ordering.
What We Could Not Verify
These are the figures the five listings do not publish, or publish twice in ways that disagree, and nothing above has been supplied in their place.
- No listing publishes a wire gauge, a thickness or a mesh opening size for the screen itself.
- YMMIND states 3.6 inches in its title and size field and 3.75 inches in its compatibility bullet.
- IBETTERN, Attsky and YMMIND publish no weight for a screen or for the pack.
- Easyworkz names four levels of filtration and then lists three parts, without naming the fourth.
- PRETYZOOM publishes no diameter, no mesh count and no press volume of any kind.
- Neither listing with a reinforced center ring says what the ring is made of.