Lush Food & Drink

Buying Guide ·Baking

Best Silicone Tart Molds for Shallow Kitchen Cabinets

The deciding specification is the published height and what each maker has put in the rim, because a steel frame cannot be rolled and only one of these five says it folds.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

I compared every published height, footprint, rim reinforcement, storage claim and temperature range across five silicone tart molds, using only each maker's own published text.

Our shortlist

Five products, one set of published numbers.
  1. Zorazio 3Pack Mini Tart Pan Silicone
    Best for a cabinet with almost no clearance

    Zorazio 3Pack Mini Tart Pan Silicone

    The lowest published height of these five at 0.7 inches, and the only listing in this pool that states the mold can be folded for storage after use to save room. Published at 11.4 inches long by 6.7 inch wide with cavities of 2.7 inch each, in BPA free silicone rated from -40 to 230 degrees Celsius. No frame, no ring and no claim about resisting deformation, which is the trade for folding. Its title says 3Pack and 3Inch while its bullet says 2pack and 2.7 inch.

    • Zorazio
    • Mini
    • 0.64 lb
  2. HUAKENER 2 Pcs Silicone Muffin Top Pan for Baking
    Best for a deep shelf with a low opening

    HUAKENER 2 Pcs Silicone Muffin Top Pan for Baking

    Two sheets published at 12.5 x 8.5 inches and 0.9 inches high, each with six cavities of 3.8 inches, in food-grade silicone rated -40 to 446 Fahrenheit. The maker's answer to flexing is material rather than metal: it states the mold is thicker than ordinary baking molds, with high toughness and not easy to deform, and is the only listing here to make that claim. Safe for microwave, oven, refrigerator and dishwasher, and also offered for resin casting.

    • HUAKENER
    • Large
    • 0.73 lb
  3. Silicone Egg Molds
    Best for hanging rather than shelving

    Silicone Egg Molds

    A hidden stainless steel frame runs around the outer edge, stated to make the mold sturdier and to stop spilling when a filled sheet is carried from counter to oven, and the listing states it is easy for hanging. Cup top diameter is 3 inch with a 0.65 inch cup depth, two sheets per pack, rated -104 to 446 degrees Fahrenheit and safe for oven, microwave, dishwasher, fridge and freezer. It publishes no overall footprint at all.

    • CAKETIME
    • Regular 3"- 2pcs
    • 1.01 lb
  4. Silikomart Silicone Classic Collection Flan/Tart Pan
    Best for one mold that can stiffen or soften

    Silikomart Silicone Classic Collection Flan/Tart Pan

    One mold rather than a pack, published at 11.02 inches diameter by 1.18-Inch, in platinum based liquid silicone. Its patented removable fiberglass ring inserts on the rim for stability and comes out again, which makes this the only rigid option here that can be made floppy on purpose. It is also the only listing with a durability figure, 3000 uses, the highest published upper limit at +450-Degree F, and the only one to state a country, Italy.

    • Silikomart
    • 11-inch
    • 0.47 lb
  5. Webake Silicone Mini Tart Pan 4 Inch Non-stick Mini ...
    Best for slotting into a narrow gap

    Webake Silicone Mini Tart Pan 4 Inch Non-stick Mini ...

    Eight separate pieces rather than a sheet, published as 4*3.3*1.1inches, which on a round mold reads as a top diameter, a bottom diameter and a height rather than a footprint. That 1.1inches is more than Zorazio's 0.7 and HUAKENER's 0.9, but each piece is small enough to go into a gap no full sheet will enter. Food grade silicone, dishwasher safe, stated to release with a push from the bottom. It publishes no temperature range anywhere.

    • Webake
    • Tart
    • 1.55 lb

Side by side

Blank means the maker does not publish it.
ModelBrandSize (capacity)WeightBest for
Zorazio 3Pack Mini Tart Pan Silicone Zorazio Mini 0.64 lb Best for a cabinet with almost no clearance
HUAKENER 2 Pcs Silicone Muffin Top Pan for Baking HUAKENER Large 0.73 lb Best for a deep shelf with a low opening
Silicone Egg Molds CAKETIME Regular 3"- 2pcs 1.01 lb Best for hanging rather than shelving
Silikomart Silicone Classic Collection Flan/Tart Pan Silikomart 11-inch 0.47 lb Best for one mold that can stiffen or soften
Webake Silicone Mini Tart Pan 4 Inch Non-stick Mini ... Webake Tart 1.55 lb Best for slotting into a narrow gap

Each pick in detail

What the listing says for it, and against it.
1 Best for a cabinet with almost no clearance

Zorazio 3Pack Mini Tart Pan Silicone

The lowest published height of these five at 0.7 inches, and the only listing in this pool that states the mold can be folded for storage after use to save room. Published at 11.4 inches long by 6.7 inch wide with cavities of 2.7 inch each, in BPA free silicone rated from -40 to 230 degrees Celsius. No frame, no ring and no claim about resisting deformation, which is the trade for folding. Its title says 3Pack and 3Inch while its bullet says 2pack and 2.7 inch.

  • For it
  • Publishes 0.7 inches, the lowest overall height stated in these five
  • The only listing here that states it folds for storage
  • Publishes both a footprint and a cavity size
  • Rated from -40 to 230 degrees Celsius
  • Against it
  • Title says 3Pack while the bullet says 2pack
  • Title says 3Inch while the bullet says 2.7 inch cavities
  • No frame, ring or stiffening claim of any kind
2 Best for a deep shelf with a low opening

HUAKENER 2 Pcs Silicone Muffin Top Pan for Baking

Two sheets published at 12.5 x 8.5 inches and 0.9 inches high, each with six cavities of 3.8 inches, in food-grade silicone rated -40 to 446 Fahrenheit. The maker's answer to flexing is material rather than metal: it states the mold is thicker than ordinary baking molds, with high toughness and not easy to deform, and is the only listing here to make that claim. Safe for microwave, oven, refrigerator and dishwasher, and also offered for resin casting.

  • For it
  • Publishes a full triple, 12.5 x 8.5 x 0.9 inches, in its own fields
  • Six cavities of 3.8 inches each, published alongside the full sheet size
  • States thicker silicone with high toughness against deforming
  • Safe for microwave, oven, refrigerator and dishwasher
  • Against it
  • Publishes no storage or folding claim
  • At 12.5 inches it asks for more shelf than the other four
  • No metal or fiber reinforcement, only thicker silicone
3 Best for hanging rather than shelving

Silicone Egg Molds

A hidden stainless steel frame runs around the outer edge, stated to make the mold sturdier and to stop spilling when a filled sheet is carried from counter to oven, and the listing states it is easy for hanging. Cup top diameter is 3 inch with a 0.65 inch cup depth, two sheets per pack, rated -104 to 446 degrees Fahrenheit and safe for oven, microwave, dishwasher, fridge and freezer. It publishes no overall footprint at all.

  • For it
  • A hidden stainless steel frame around the outer edge
  • States it is easy for hanging, the only such claim here
  • Publishes a cup depth, 0.65 inch, which no rival states for its cavities
  • Rated -104 to 446 Fahrenheit, oven to freezer
  • Against it
  • Publishes no overall footprint in any field or bullet
  • A steel frame in the rim cannot be rolled or folded
  • Its dimension fields are empty; only a package figure exists
4 Best for one mold that can stiffen or soften

Silikomart Silicone Classic Collection Flan/Tart Pan

One mold rather than a pack, published at 11.02 inches diameter by 1.18-Inch, in platinum based liquid silicone. Its patented removable fiberglass ring inserts on the rim for stability and comes out again, which makes this the only rigid option here that can be made floppy on purpose. It is also the only listing with a durability figure, 3000 uses, the highest published upper limit at +450-Degree F, and the only one to state a country, Italy.

  • For it
  • A removable fiberglass ring, so the mold can be stiff or floppy
  • The only durability figure in these five, 3000 uses
  • The highest upper limit published here, +450-Degree F
  • Publishes a full dimension triple in its own fields
  • Against it
  • 1.18-Inch is the highest published figure of these five
  • One mold only, where three rivals give two or more
  • At 11.02 inches across it will not slide under a low shelf edge
5 Best for slotting into a narrow gap

Webake Silicone Mini Tart Pan 4 Inch Non-stick Mini ...

Eight separate pieces rather than a sheet, published as 4*3.3*1.1inches, which on a round mold reads as a top diameter, a bottom diameter and a height rather than a footprint. That 1.1inches is more than Zorazio's 0.7 and HUAKENER's 0.9, but each piece is small enough to go into a gap no full sheet will enter. Food grade silicone, dishwasher safe, stated to release with a push from the bottom. It publishes no temperature range anywhere.

  • For it
  • Eight separate pieces, the most in any pack here
  • Each piece is small enough for a gap no full sheet will fit
  • Dishwasher safe and stated to release with a push from below
  • Publishes a dimension line, unusual for a listing with empty fields
  • Against it
  • Publishes no temperature range at all, the only blank here
  • Its three figures are not a footprint and the listing does not say so
  • Its 1.55 lb weight field is the highest of these five

Who should skip this: Skip this if weight matters: at 1.55 lb it is the heaviest of the five published weights.

Our verdict

Zorazio publishes 0.7 inches and is the only one of the five to state that it folds for storage. HUAKENER publishes 0.9 inches with thicker silicone instead of a frame. CAKETIME hides a stainless steel frame in the rim and states it hangs. Silikomart is one 11.02 inch mold at 1.18-Inch with a removable fiberglass ring. Webake is eight separate pieces at 1.1inches and publishes no temperature range.

“A frame in the rim is a frame you cannot roll away.”

Lush Editorial Team

What separates these five

Heights from 0.7 to 1.18 inches Zorazio publishes 0.7 inches, HUAKENER 0.9, Webake 1.1inches and Silikomart 1.18-Inch. CAKETIME publishes only a 0.65 inch cup depth.
One listing says how it stores Zorazio states it can be folded for storage after use. CAKETIME states it hangs. The other three say nothing about where the mold goes between bakes.
Three answers to the same flex problem CAKETIME hides a steel frame in the rim, Silikomart inserts a removable fiberglass ring, HUAKENER just makes the silicone thicker.
Nobody publishes a stacked height Every figure here describes one item lying alone. Two sheets nested and eight pieces stacked are the numbers a shelf needs, and no listing gives either.
Four numbers that are not a footprint Webake publishes 4*3.3*1.1inches for a round mold. Its own five inch model spells the same pattern out as top diameter, bottom diameter and height.

How we chose

Priorities, not a computed score. The inputs are published specifications, so we rank by what matters most and say how much.

  1. 30% The published height, and what it describesThis is what a shallow shelf measures. Zorazio publishes 0.7 inches, HUAKENER 0.9 inches, Webake 1.1inches and Silikomart 1.18-Inch. CAKETIME publishes only a 0.65 inch cup depth, which is not the same thing as the height of the sheet it sits in. Four of five give a figure you can hold a tape measure against.
  2. 25% What sits in the rimCAKETIME hides a stainless steel frame there, Silikomart inserts a removable fiberglass ring, HUAKENER relies on thicker silicone and the other two publish nothing. A rim that will not bend is a mold that must lie flat, which on a low shelf is the whole argument. Only Silikomart lets you take the stiffness out again.
  3. 20% Whether the maker says how it storesZorazio states it folds. CAKETIME states it hangs. That is the entire set of storage information in these five listings, on a product category whose main claim over metal is that it squashes into a drawer. Three of the five never mention where the mold lives between bakes.
  4. 15% The footprint, because a low shelf is also a shallow oneHUAKENER needs 12.5 by 8.5 inches, Zorazio 11.4 by 6.7, Silikomart 11.02 inches across. Webake needs 4 inches per piece and eight of them. CAKETIME publishes nothing at all, so it is the one pick here you cannot check against a shelf before it arrives.
  5. 10% The temperature range publishedHUAKENER, CAKETIME, Zorazio and Silikomart all publish one, from -40 to 446 Fahrenheit to -104 to 446 Fahrenheit and -75-Degree F to +450-Degree F. Webake publishes none. It matters less here than on a baking page, but a silicone mold with no stated range is a mold with no stated oven limit.

How the Five Compare on the Numbers

Seven live pages already rank this pool by cavity count, by release surface, by counter footprint, by what supports a filled tray, by diameter against temperature and by what the pack contains. Footprint gets covered twice. Nothing asks the question a shallow shelf asks, which is how tall the thing is when it is put away rather than when it is full.

On that measure these five run from 0.7 inches to 1.18 inches, and the difference is not really the silicone. It is what each maker has put into the rim. Zorazio folds. HUAKENER is deliberately thickened so it will not deform. CAKETIME has a stainless steel frame hidden in the edge. Silikomart carries a removable fiberglass ring. Webake sells eight separate pieces instead of a tray.

Specification Zorazio HUAKENER CAKETIME Silikomart Webake
Published height 0.7 inches 0.9 inches 0.65 inch cup depth 1.18-Inch 1.1inches
Published footprint 11.4 inches long x 6.7 inch wide 12.5 x 8.5 inches not published 11.02″ diameter 4*3.3 per piece
Pieces per pack Two in the bullet, Three in the title Two Two One Eight
Storage claim folded for storage not published easy for hanging not published not published
Stiffening in the rim not published thicker silicone stated hidden stainless steel frame removable fiberglass ring not published
Stated temperature range -40 to 230 degrees Celsius -40 to 446 Fahrenheit -104 to 446 Fahrenheit -75-Degree F to +450-Degree F not published
Cavity figure 2.7 inch each 6 cavities, 3.8 inches each 3 inch cup top One 11.02 inch mold 4 inch each
Weight field 0.64 lb 0.73 lb 1.01 lb 0.47 lb 1.55 lb
Dimension fields empty 12.5 x 8.5 x 0.9 in empty 11.02 x 1.18 x 1.18 in empty
Dishwasher stated yes yes yes yes yes
Durability figure not published not published not published 3000 uses not published
Made in stated not published not published not published Italy not published

What the table cannot show is stacked height, because nobody publishes it. Two HUAKENER trays at 0.9 inches each are not 1.8 inches when nested, and eight Webake pieces are not eight times 1.1inches. Every figure here describes one item lying alone, which is not how any of them will sit on your shelf.

The Rim Decides How Flat It Goes Away

What Each Maker Put in the Edge

CAKETIME publishes a hidden stainless steel frame around the outer edge, stated to make the mold sturdier and to stop spilling when a filled tray moves from counter to oven. Silikomart publishes a patented removable fiberglass ring that inserts on the mold rim for stability. HUAKENER publishes no frame at all and instead claims thicker silicone with high toughness that is not easy to deform.

Those three answers to the same problem have opposite consequences on a shallow shelf. A steel frame cannot be rolled at any thickness. A removable ring can come out, which makes Silikomart the only rigid option here that becomes floppy on purpose. Thickened silicone bends but resists it, so HUAKENER will go flat and push back.

The Only One That Says It Folds

Zorazio is alone in publishing a storage method: it can be folded for storage after use to save room. That is the sentence a shallow cabinet needs, and it comes with the lowest published height in these five at 0.7 inches. Nothing else here says what happens to the mold between bakes except CAKETIME, which says it hangs.

The trade is that Zorazio publishes nothing stiff. There is no frame, no ring and no claim about resisting deformation, and its cavities are 2.7 inch each across a sheet published at 11.4 inches long by 6.7 inch wide. A sheet that folds is a sheet that will flex on the way to the oven, which is why so many listings in this wider pool advise a baking tray underneath.

Three Listings That Do Not Add Up

Zorazio Publishes Two Pack Sizes and Two Diameters

Its title says 3Pack and Mini Quiche Pans 3Inch. Its third bullet says you will get 2pack of Non-stick Mini Pie Pans and that each cavity measures 2.7 inch. So the pack count is two or three depending on which line you read, and the cavity is 3 inches or 2.7 inches depending on the same choice.

The same bullet then says you can create 18 mini tarts at one time, which does not divide evenly into two sheets of an unstated cavity count. I have used the bullet figures in the table because the brief here is to follow the maker’s own sentence over a title, but on this listing the maker’s own sentences disagree with each other as well.

Webake Publishes Three Numbers That Are Not a Footprint

Its only dimension line reads 4*3.3*1.1inches. A round tart mold cannot be 4 inches one way and 3.3 the other, so those figures are almost certainly a top diameter, a bottom diameter and a height. The same maker’s five inch mold confirms the pattern by spelling it out: top diameter 5 inches, bottom diameter 4.1 inches, 1 inch height.

That matters here because a shallow shelf cares about the 1.1inches and nothing else. Read as a footprint the figures would suggest a small rectangular pan, which the product is not. Webake also publishes no temperature range anywhere in its listing, which is the only blank of its kind among these five.

What a Shallow Shelf Actually Has to Take

A Tray Is Flat but Wide, Eight Pieces Are Deep but Small

HUAKENER publishes 12.5 by 8.5 inches at 0.9 inches high for each of its two sheets, so it needs a shelf more than a foot deep and barely an inch of clearance. Webake publishes eight separate pieces, each about 4 inches across and 1.1inches high, which will go into a gap the HUAKENER cannot enter and then occupy it eight times over.

Neither listing says whether the pieces nest. Stainless and carbon steel tart molds elsewhere in this pool state plainly that they stack together for storage, and no silicone listing here makes that claim. That is the gap this page keeps running into: silicone stores well in principle and almost nobody publishes how.

Silikomart Is the Outlier in Every Direction

It is one mold, not a pack: 11.02 inches across and 1.18-Inch, which are the two highest figures published on this page. It is also the only listing with a durability claim, 3000 uses, the highest published upper limit at +450-Degree F, and the only one to name where it is made, which is Italy.

For a shallow cabinet it is the hardest to place and the easiest to justify. An eleven inch disc at 1.18-Inch will not slide under a low shelf edge, but with the fiberglass ring taken out it is a plain silicone sheet that can be rolled. None of the other four gives you that choice, because their stiffening is either permanent or absent.

Which One Fits Your Kitchen

The cabinet with barely an inch of clearance. Zorazio. It publishes 0.7 inches, the lowest figure here, and is the only one of the five that states it can be folded for storage after use.

The shelf that is deep but very low. HUAKENER. Two sheets at 12.5 by 8.5 inches and 0.9 inches high, with thicker silicone stated to resist deforming rather than a metal frame.

The kitchen with a hook and no shelf. CAKETIME. A hidden stainless steel frame keeps the shape and the listing states it is easy for hanging, with a 0.65 inch cup depth and a -104 to 446 Fahrenheit range.

The baker who wants one mold, not a set. Silikomart. One 11.02 inch mold at 1.18-Inch with a removable fiberglass ring, 3000 uses stated, -75-Degree F to +450-Degree F, made in Italy.

The narrow gap between two stacks. Webake. Eight separate pieces at 4 inches across and 1.1inches high go where a full sheet cannot, if you can live with no published temperature range.

What We Could Not Verify

All of the above is the makers’ own text. These six things I looked for and none of these five publishes.

  • Any stacked or nested height for a multi-piece pack, on any of the five.
  • Any temperature range for Webake, in a field or a bullet.
  • Any footprint for CAKETIME, whose dimension fields are empty.
  • Whether Zorazio contains two sheets or three, which its own text answers both ways.
  • Whether the CAKETIME steel frame allows the tray to be rolled at all.
  • Any durability figure except Silikomart’s 3000 uses, which no test is published for.

Frequently asked questions

Which of these takes the least height in a cabinet?+

Zorazio publishes 0.7 inches, the lowest figure of these five, and it is also the only listing that says what to do with the mold afterwards: it states it can be folded for storage after use to save room. HUAKENER follows at 0.9 inches but publishes no storage claim. CAKETIME cannot fold at all, because its rim contains a stainless steel frame, and it states hanging instead.

Why does a silicone mold have metal in it?+

To stop a filled sheet from sagging on the way to the oven. CAKETIME states that its hidden stainless steel frame around the outer edge makes the mold sturdier and prevents spilling during the carry from counter to oven. Silikomart solves the same problem with a patented removable fiberglass ring on the rim. HUAKENER solves it by making the silicone thicker instead of adding anything.

Can I roll these up to put them away?+

Only one of the five says so. Zorazio states it folds. Silikomart is described as ultra flexible and its stiffening ring is removable, so in principle it can be rolled once the ring is out, though the listing does not say that. CAKETIME has a permanent steel frame in the rim and cannot. HUAKENER and Webake publish nothing either way about storage.

How much shelf depth do they need?+

HUAKENER asks for the most, at 12.5 by 8.5 inches for each of its two sheets. Zorazio publishes 11.4 inches long by 6.7 inch wide. Silikomart is 11.02 inches across as a single round mold. Webake's eight pieces are about 4 inches each, so they will go into a narrow gap, though the listing never says whether they nest. CAKETIME publishes no footprint at all.

Does one of these publish a life expectancy?+

Silikomart does, and it is the only one. Its listing states guaranteed durability for 3000 uses, alongside a range of -75-Degree F to +450-Degree F and a note that it is made in Italy. No test or method is published behind the 3000 figure. The other four publish no durability figure, no use count and no warranty of any kind.

Which listing should I read most carefully?+

Zorazio, because its own text disagrees with itself twice. The title says 3Pack and 3Inch while the third bullet says 2pack and cavities of 2.7 inch, and the same bullet claims 18 tarts at one time without saying how many cavities a sheet has. Webake is the other one to watch: its 4*3.3*1.1inches line is a diameter pair and a height, not a footprint.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.