How the Five Compare on the Numbers
These five steam cleaners separate on four published figures: steam temperature, heat up time, tank capacity and run time. The Dupray Neat publishes the highest temperature at 275 F and up to 50 minutes of steam. The WSRYYCC publishes the fastest heat up at 15 seconds and the highest wattage at 1500 watts. The McCULLOCH MC1385 publishes the largest tank at 64 ounces and the longest run time at up to 120 minutes. The Phueut publishes the lightest weight at 3.9 pounds. The Gautye publishes the smallest footprint at 6.2 by 9.2 by 7.2 inches.
Read the numbers as claims, not as outcomes. A maker that publishes 275 F is stating what the machine is rated to produce, not what it will do to a particular pan. A maker that publishes a 15 second heat up is stating a time to working temperature. Where a figure is missing, the machine cannot be ranked on that figure at all, and three of the five leave at least one important number unpublished.
The table does not tell you how any of these machines behaves on a greasy range hood or a stained grout line. It also does not tell you how long a fill actually lasts in a kitchen, because a published run time is measured under conditions the maker sets. What the table does give you is a way to rule machines in or out before you read further: if a published temperature or tank figure is missing, that machine cannot compete on that row.
Heat, Pressure and What the Makers Publish
Steam temperature as a published rating
The Dupray Neat publishes steam up to 275 F, the highest figure among the five. The CURMEDI publishes 239 F and the Phueut 230 F, though the CURMEDI is not one of the five picks. The WSRYYCC publishes 221 F and the Gautye 212 F. The McCULLOCH MC1385 does not publish a steam temperature, so it cannot be placed on this scale at all.
A published temperature is a rating, not a result. It tells you what the maker states the machine is capable of producing at the nozzle. It does not tell you how quickly a baked on layer releases, because that depends on dwell time, surface and the accessory fitted. Treat the number as one input among several, and treat a missing number as a reason to look at the other published figures instead.
Pressure and control
Three of the five publish a pressure figure. The WSRYYCC and the Gautye both publish up to 3 bar. The McCULLOCH MC1385 publishes 4 bar, which the maker also states as 58 PSI. The Phueut, the Dupray Neat and the CURMEDI do not publish pressure. Higher stated pressure is the maker’s claim for driving steam into grout lines and narrow gaps.
Control is published separately from pressure. The WSRYYCC publishes six steam intensity settings on a touch control. The Gautye publishes three adjustable levels on handle mounted controls. The McCULLOCH publishes on demand variable steam with an optional steam lock for continuous output. The Phueut, the Dupray Neat and the CURMEDI do not publish a level count.
Tanks, Run Times and Refill Stops
Published capacity and stated run time
The McCULLOCH MC1385 publishes a 64 ounce water tank and up to 120 minutes of steam, the longest stated run time here. The Dupray Neat publishes up to 50 minutes but no tank figure. The Gautye publishes a 1.69 quart tank and up to 45 minutes. The WSRYYCC publishes a 1.25 liter tank but no run time in minutes. The Phueut publishes up to 8 to 12 minutes of steam per fill and no tank capacity.
For kitchen work, the pair of figures matters more than either one alone. A large published tank with a short stated run time would still mean frequent stops, and a long stated run time from an unpublished tank is harder to plan around. Where a maker publishes only one of the two, the other remains unknown, and this guide does not fill it in.
Heat up time and cord length
The WSRYYCC and the Gautye both publish a heat up of about 15 seconds. The Phueut publishes 3 to 5 minutes. The McCULLOCH publishes under 12 minutes. The Dupray Neat does not publish a heat up time. A short stated heat up suits a kitchen where a spill is dealt with immediately rather than at the end of a session.
Reach is published as cord and hose length. The McCULLOCH publishes an 18 foot power cord and a 7 foot steam hose. The Phueut publishes a 9.8 foot cord and the CURMEDI a 9.4 foot cord. The Gautye publishes a 78 inch cord. The Dupray Neat and the WSRYYCC do not publish a cord length.
Which One Fits Your Kitchen
You want the highest published steam temperature. The Dupray Neat states 275 F and up to 50 minutes of steam, with a 20 piece accessory kit and a 2 year limited warranty. It weighs 9.0 pounds and publishes a 9.5 by 10.5 by 10.5 inch body.
You want the fastest published heat up. The WSRYYCC states a 15 second heat up, 1500 watts, 3 bar of pressure and a 1.25 liter tank, with six steam intensity settings. The maker does not publish dimensions or a run time in minutes.
You want the lightest machine of the five. The Phueut weighs 3.9 pounds and publishes 1050 watts, a 3 to 5 minute heat up, 230 F steam and a 9.8 foot cord. It ships with 12 accessories and states up to 8 to 12 minutes of steam per fill.
You want the longest stated run time. The McCULLOCH MC1385 publishes a 64 ounce tank, up to 120 minutes of steam, 4 bar of pressure and 23 accessories, with an 18 foot cord and a 7 foot hose. It weighs 13.0 pounds.
You want the most accessories in the box. The Gautye ships with 15 accessories and publishes a 1.69 quart tank, up to 45 minutes of operation, a 15 second heat up, 3 bar of pressure and a 78 inch cord. It publishes the smallest footprint at 6.2 by 9.2 by 7.2 inches.
What We Could Not Verify
Several figures that would help a buyer are simply not published by the makers, and this guide leaves them blank rather than estimating.
- Wattage for the Dupray Neat and the Gautye, which neither maker states.
- Steam temperature for the McCULLOCH MC1385, which the maker does not publish.
- Tank capacity for the Phueut and the Dupray Neat, which neither maker states.
- Dimensions for the Phueut, the WSRYYCC and the CURMEDI, which those makers do not publish.
- Weight for the LABIGO, which the maker does not publish.
- Run time in minutes for the WSRYYCC and the CURMEDI, which neither maker states.