Lush Food & Drink

Explainer

What to do if grill has mold?

Scrub the plates and every removable part with hot soapy water, dry them fully, and check the lid, drip tray and grease channels where mold usually starts.

By the Lush Editorial Team·Researched & Compared

Take the grill apart, wash every removable part with hot soapy water, and let all of it dry completely before it goes back together. Mold on a grill means moisture stayed trapped on a surface, usually the plates, the lid, the drip tray or the grease channel underneath, so the fix is cleaning plus drying plus a storage change that stops the damp from returning. Our Best Chocolate Molds for Bars, Spheres and Small Shapes compares the published figures of five of them.

Where mold grows on an indoor grill

Mold needs food residue and standing moisture. On an indoor grill the likely spots are the nonstick plates, the underside of the lid, the drip tray and any channel that carries grease away from the cooking surface. A grill stored closed with a damp plate is the classic case: the lid holds the moisture in and the residue feeds it.

The picks in our guide to Best Indoor Grills for High-Heat Searing show how differently makers build these parts. The Ninja Sizzle GR101 has removable nonstick grill and griddle plates and a detachable, dishwasher-safe perforated mesh lid, so both surfaces that trap moisture come off. The Hamilton Beach Electric Indoor Searing Grill has a removable nonstick, PFAS-free grill plate, a lid that lifts off for the top rack of a dishwasher, and an extra-large drip tray that slides out from under the cooking surface.

Those removable parts matter here. A plate you can lift out can be washed and dried on both faces, and a tray that slides free can be emptied and left to air. A grill whose plates stay fixed gives moisture fewer ways out.

Clean the plates, lid and tray

Start with the plates. Wash them in hot soapy water, use a soft sponge rather than anything abrasive on a nonstick surface, and rinse until the water runs clear. If the maker lists the plate as dishwasher safe, the dishwasher is an option, but check the plate is fully dry before it goes back on the grill, since a dishwasher cycle ends wet.

Then do the lid and the tray. The Ninja Sizzle lid is detachable and dishwasher-safe, and the Hamilton Beach lid lifts off for the top rack. The Hamilton Beach drip tray slides out for the dishwasher too. Wash the grease channel and the base by hand, because residue collects in the corners where a plate sits.

For the cooking surfaces themselves, the makers describe coatings rather than cleaning chemicals. The Dyna-Living Commercial Electric Griddle has a 0.3 inch nonstick coating on a thickened panel, and the Besococina Electric Griddle uses a coating-free 5mm heat-resistant SUS450 stainless steel surface that it says can double as a cutting board. A coating-free steel surface tolerates firmer scrubbing than a coated one.

Dry every part before it goes back

Drying is the step that decides whether the mold returns. Wipe the plates with a dry cloth, then leave them propped where air reaches both sides. Do the same with the lid and the drip tray. Reassemble only when every surface feels dry to the touch, not merely wiped.

Storage matters as much as drying. Leave the lid open or off while the grill sits between uses, so any remaining moisture escapes instead of condensing under a closed cover. Store the drip tray out of the base rather than slid in wet.

The grills in the guide vary in how easy that is. The Besococina has a detachable structure with removable components the maker lists as dishwasher-safe, and it describes the unit as lightweight and portable for storage. The T-Fal OptiGrill XL has nonstick removable plates. The Hamilton Beach unit weighs 8.14 pounds and the Ninja Sizzle 7.8 pounds, so either lifts off a counter without much effort.

Run the grill hot before the next cook

After cleaning and drying, a hot run helps drive off anything left in the seams. The makers publish top temperatures for their grills, and those figures tell you what the unit can reach. The Ninja Sizzle reaches up to 500°F. The Hamilton Beach sears at 450°F and adjusts from 200°F to 450°F. The Besococina has a 1650-watt heating system with a peak of 536°F. The Dyna-Living griddle runs on 3000 watts with a control range from 122°F to 572°F.

Heat alone does not remove mold residue, so treat the hot run as a finishing step after washing, not a substitute for it. Let the grill cool, then check the plates and tray again for any damp spots before you close it up.

One caution from the makers: the T-Fal OptiGrill XL is rated at 1800 watts and the Dyna-Living at 3000 watts, so both draw real power. Follow the maker’s instructions for the unit you own rather than assuming a cleaning cycle exists.

Stop the mold coming back

Wipe the plates down after every cook, once the grill has cooled, and empty the drip tray before it sits. The Hamilton Beach tray is designed to catch juices before they spill, and leaving those juices in place over days is exactly the condition mold wants. The Ninja Sizzle has high walls and grease catches on its plates for the same reason.

Dry the plates by hand rather than letting them air dry inside a closed grill. If you wash a removable plate in the dishwasher, take it out at the end of the cycle and dry it. Store the lid off or open, and keep the drip tray out of the base.

Check the grease channel and the base each time you put the grill away. Those are the places a quick wipe misses, and they are the places moisture sits longest. A dry grill stored open has nothing for mold to use.

When cleaning is not enough

If mold has reached the inside of the housing, the wiring area or a seam you cannot open, stop and follow the maker’s care instructions for that model. The guide’s picks list removable plates, lids and trays, which are the parts you can reach and dry. Anything sealed inside the body is not a cleaning job for a sponge.

For a grill with a coated surface, check the coating before scrubbing hard. The Dyna-Living describes its nonstick panel as rust-proof and high-temperature resistant, and the Hamilton Beach plate as nonstick and PFAS-free. A coating that has lifted or flaked is a surface problem, not a mold problem, and scrubbing will not fix it.

Common questions

Can I just heat the grill to kill mold?

Heat does not remove the residue mold grew on, and the plates need washing first. The makers publish top temperatures, such as 500°F on the Ninja Sizzle and 450°F on the Hamilton Beach, but a hot run is a finishing step after cleaning and drying, not a replacement for either.

Should I store my indoor grill closed or open?

Store it open or with the lid off. A closed lid traps moisture against the plates, which is the condition mold needs. Dry the plates, lid and drip tray fully, then leave air around them between uses.

Which parts of an indoor grill should I wash after every cook?

The plates, the lid and the drip tray. On the Ninja Sizzle the grill and griddle plates are removable and the mesh lid is detachable and dishwasher-safe. On the Hamilton Beach the plate, lid and extra-large drip tray all come off for cleaning.

Can mold grow in the drip tray?

Yes, because the tray collects juices and sits under the cooking surface. Empty it after each cook rather than leaving it in place. The Hamilton Beach tray slides out for cleaning, and the Ninja Sizzle plates have grease catches that feed the same area.

Is a dishwasher enough to clean a moldy grill plate?

A dishwasher washes but ends wet, so dry the plate by hand before it goes back on the grill. The Ninja Sizzle lid and the Hamilton Beach plate and tray are listed as dishwasher-safe, but none of them should return to a closed grill damp.

Does a coating-free steel surface clean differently?

It tolerates firmer scrubbing than a coated one. The Besococina griddle uses a coating-free 5mm heat-resistant SUS450 stainless steel surface, while the Dyna-Living has a 0.3 inch nonstick coating that needs a soft sponge. Match the cleaning method to the surface the maker describes.

Ready to compare actual models?

Our buying guides put five products side by side on the numbers their makers publish.

More questions about chocolate molds