Explainer
When should you use the grill setting on an oven?
Use the grill setting when you want fast, direct top-down heat for browning, melting, or charring the surface of food, not for cooking thick pieces through.
By the Lush Editorial Team·Researched & Compared
Use the grill setting when you want fast, direct heat from the top of the oven to brown, char, or melt the surface of food. It suits thin items and finishing jobs, such as melting cheese on a gratin, blistering peppers, or giving a roast a darker crust, rather than cooking a thick piece of meat through from raw.
The setting works by driving the top element hard while little or no heat comes from below, so the exposed surface takes the brunt. That is why food sits close to the element and why you watch it. For anything that needs steady heat from all sides, a covered pot in a moderate oven is the better tool, and the picks in our Best Dutch Ovens for Braising, Bread and Batch Cooking guide are built for exactly that kind of enclosed, even cooking.
How the grill setting differs from a normal bake setting
On a bake setting the oven circulates or radiates heat from the bottom and the elements cycle on and off to hold a set temperature. On the grill setting the top element runs at full power for as long as the setting is on, so the heat is concentrated at the roof of the cavity and the surface of the food browns quickly. The element glows and the heat is fierce and one-directional.
That difference shapes what you cook. A bake setting is for even, sustained heat around a whole dish. The grill setting is for the last few minutes, when the inside is already done and only the top needs color. If you leave a thick item under it, the outside will scorch before the center is cooked, because the heat never reaches the middle at the same rate.
Many ovens offer a high and a low grill setting. High is for quick charring and melting, low for gentler browning of something that needs a little more time on the surface, such as a piece of fish or a slice of bread that would burn at full power. The principle is the same: direct top heat, watched closely.
What the grill setting is good for
Thin, flat foods and finishing jobs are the natural fit. Think open-faced sandwiches, melted toppings, browned cheese, blistered skin on peppers, charred bread, or a quick crust on a piece of fish. These are items where the surface is the point and the inside cooks in the same short window. Keep them close to the element and stay nearby.
It also finishes dishes that were cooked gently first. A braise that has simmered for hours can go under the grill for a few minutes to crisp the top. The enameled cast iron pots in our Dutch oven guide are oven safe to high temperatures, and the makers publish those limits: the Overmont is stated as oven safe up to 500°F, the Lodge Essential up to 500 degrees Fahrenheit, the Nuovva up to 500° F, the JANSKA DuraCast as 500°F oven-safe, and the Fijinhom up to 500°F. A pot rated for that heat can go under a grill setting, though the exposed food, not the pot, is what browns.
What the grill setting is not good for is a thick roast, a whole chicken, or a deep casserole that needs heat to reach the center. Those want the enclosed, all-around heat a covered pot gives, which is the whole reason a heavy lidded Dutch oven exists.
When a countertop grill does the job instead
An oven grill setting heats from above only. A countertop indoor grill puts the heat directly under and often above the food on a plate, which gives you contact searing on the cooking surface. If your aim is a charred steak or a seared chop rather than a browned top, a dedicated indoor grill is the more direct tool, and our Best Indoor Grills for High-Heat Searing guide compares five of them on their published figures.
The makers state their top temperatures. The Ninja Sizzle reaches temperatures of up to 500°F. The Hamilton Beach sears at 450° F, with a temperature range from 200°F to 450°F. The Besococina is stated to reach a peak temperature of 536F. The Dyna-Living griddle has a temperature control ranging from 122°F to 572°F. The T-Fal OptiGrill lists 1800 watts and nine cooking programs. These are surface temperatures on a plate, not the radiant blast of an oven roof, and they act on the food from below as well as above.
The choice comes down to shape and result. A browned, melted top on a wide dish is an oven grill job. A seared crust on a steak or a burger is a job for a hot plate, whether that is a countertop grill or a cast iron pan on the stove.
Getting a good result under the grill
Position matters more than anything. The closer the food sits to the element, the faster the surface colors, and the less time the heat has to dry out the interior. Use the top rack position for quick melting and charring, and drop a level or two for anything that needs a few minutes of gentle browning. Watch through the door rather than walking away, because the gap between browned and burnt is short at full power.
Dry surfaces brown better than wet ones. Pat food dry and avoid a soaking sauce on top if you want color rather than steam. A light coating of oil helps the surface conduct heat evenly. Use an oven-safe pan or dish, and check the maker’s stated heat limit before you slide a pot under the element. The Dutch oven picks above are all stated as oven safe to 500°F or 500 degrees Fahrenheit, which covers a grill setting on most home ovens.
Keep the door closed while grilling so the heat stays at the roof, and open it only to check. If your oven has a grill setting with the door open, follow the maker’s instructions for that mode, since some ovens run the element differently with the door ajar.
The limits to keep in mind
The grill setting gives you one direction of heat, so it cannot cook a thick item evenly. It also browns unevenly if the element has hot spots, which is why turning the dish or moving it around partway through helps. And it is a high-heat mode, so anything with a low heat limit, such as a plastic-handled utensil or a dish not rated for the temperature, should stay out of the cavity.
For enclosed, even cooking, a lidded pot in a moderate oven is the tool, and the Dutch oven guide covers five pots with their published dimensions and heat limits. For direct surface searing, a countertop grill is the tool, and the indoor grill guide covers five with their stated temperatures and wattages. The oven grill setting sits between them: a fast way to finish a surface, best used for short bursts on food that is already cooked or thin enough to cook through quickly.
Common questions
Can you cook raw chicken through under the oven grill?
Not reliably. The grill setting heats from above, so a thick piece browns on the surface long before the center is cooked. For raw chicken, cook it through in a moderate oven or in a covered pot first, then finish the skin under the grill for a few minutes if you want it crisp.
What is the difference between the grill setting and the broiler?
They are the same idea under different names. In US ovens the mode is usually called broil, and in UK and Australian ovens it is called grill. Both run the top element at high heat to brown, char, or melt the surface of food placed close to it.
Should the oven door be open or closed when grilling?
Follow the oven maker's instructions for the mode. Many ovens run the grill element with the door closed, holding heat at the roof of the cavity. Some have a specific setting that expects the door ajar. The maker's manual for your model is the authority, not a general rule.
Can I put a Dutch oven under the grill setting?
Only if the maker states a heat limit that covers it. The Overmont, Lodge Essential, Nuovva, JANSKA DuraCast, and Fijinhom pots in our Dutch oven guide are all stated as oven safe to 500°F or 500 degrees Fahrenheit. Check the stated limit for your own pot before sliding it under the element.
Does the grill setting use less energy than baking?
That is not a figure this site has compared, and the makers do not publish energy use for oven modes. What can be said is that grilling is usually a short finishing step of a few minutes rather than a long cook, so it runs for less time than a full bake.
Why does food burn on top before it is done inside?
Because the grill setting delivers intense heat from one direction only. The surface absorbs that heat fast while the center relies on slower conduction through the food. Thick items need lower, all-around heat first, with the grill used only at the end for color.
Ready to compare actual models?
Our buying guides put five products side by side on the numbers their makers publish.