Lush Food & Drink

Buying Guide ·Baking

Best Chocolate Molds for a Baking Gift Kit

The deciding specification is the size of the piece that comes out, because one listing publishes it, one publishes a cavity size, and three publish neither.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

I compared published cavity and finished piece sizes, cavity counts, mold dimensions, depth, heat ranges in both units, material and weight across five silicone chocolate molds.

Our shortlist

Five products, one set of published numbers.
  1. Chocolate Bar Mold,Non-Stick Chocolate Molds,100% Fo...
    Best for knowing what the finished bar looks like

    Chocolate Bar Mold,Non-Stick Chocolate Molds,100% Fo...

    A bar mold published at 10 by 6.7 by 0.6 inches that also publishes the finished chocolate at 4.5 by 1.7 by 0.6 inches, deep enough for a layer of pistachio filling, rated from minus 40 F to 446 F.

    • Husfunov
    • 10 Snap
    • 0.2 lb
  2. Actvty Chocolate Cover Cookie Silicone Molds
    Best for covering a cookie neatly

    Actvty Chocolate Cover Cookie Silicone Molds

    Two molds of twelve round cavities each, 24 in total, with every cavity published at 2.1 by 0.82 inches, sized so a cookie fits without using more chocolate than it needs.

    • Actvty
    • 0.49 lb
  3. Lerykin Small 15-Cavity Semi Sphere Silicone Molds N...
    Best for domes and chocolate bombes

    Lerykin Small 15-Cavity Semi Sphere Silicone Molds N...

    Two molds of fifteen semi sphere cavities each, in food grade silicone rated from minus 40 F to 446 F, released by pressing the base with a finger once the chocolate has set.

    • Lerykin
    • Mini
    • 0.35 lb
  4. 2PCS Silicone Molds for Chocolate
    Best for spelling something out on a cake

    2PCS Silicone Molds for Chocolate

    One letter mold and one number mold at 8.2 by 4.5 inches with 105 cavities between them, including hearts and the words for a birthday, in silicone rated to 450 F.

    • OLLBIT
    • Small mini
    • Weight not listed
  5. Pimoys 4 Pcs Flower & Bow Silicone Molds for Chocola...
    Best for a decorative shape on top

    Pimoys 4 Pcs Flower & Bow Silicone Molds for Chocola...

    Four molds of bow and flower patterns at a published 0.39 inches thick, for cake and cookie decorations, with the lowest heat rating in this group at 240 F and a top rack dishwasher instruction.

    • Pimoys
    • 0.33 lb

Side by side

Blank means the maker does not publish it.
ModelBrandSize (capacity)WeightBest for
Chocolate Bar Mold,Non-Stick Chocolate Molds,100% Fo... Husfunov 10 Snap 0.2 lb Best for knowing what the finished bar looks like
Actvty Chocolate Cover Cookie Silicone Molds Actvty not published 0.49 lb Best for covering a cookie neatly
Lerykin Small 15-Cavity Semi Sphere Silicone Molds N... Lerykin Mini 0.35 lb Best for domes and chocolate bombes
2PCS Silicone Molds for Chocolate OLLBIT Small mini not published Best for spelling something out on a cake
Pimoys 4 Pcs Flower & Bow Silicone Molds for Chocola... Pimoys not published 0.33 lb Best for a decorative shape on top

Each pick in detail

What the listing says for it, and against it.
1 Best for knowing what the finished bar looks like

Chocolate Bar Mold,Non-Stick Chocolate Molds,100% Fo...

A bar mold published at 10 by 6.7 by 0.6 inches that also publishes the finished chocolate at 4.5 by 1.7 by 0.6 inches, deep enough for a layer of pistachio filling, rated from minus 40 F to 446 F.

  • For it
  • The only one of the five that publishes the size of the finished chocolate
  • Publishes 4.5 by 1.7 by 0.6 inches out of a mold measuring 10 by 6.7 by 0.6
  • States why the depth matters: 0.6 inches holds a layer of pistachio and nut filling
  • Rated from minus 40 F to 446 F, with the Celsius figures matching
  • Against it
  • Publishes no cavity count, so how many bars come out of one mold is unstated
  • One tray only, where two picks here ship two
  • Its size field reads 10 Snap rather than a size
2 Best for covering a cookie neatly

Actvty Chocolate Cover Cookie Silicone Molds

Two molds of twelve round cavities each, 24 in total, with every cavity published at 2.1 by 0.82 inches, sized so a cookie fits without using more chocolate than it needs.

  • For it
  • Publishes a cavity size, at 2.1 by 0.82 inches
  • Two molds with twelve cavities each, 24 in one purchase
  • Explains the sizing as a chocolate to cookie ratio rather than just a measurement
  • Named for bath bombs, lotion bars and soap as well as chocolate
  • Against it
  • Publishes a range of minus 40 to 230 degrees Celsius and gives it as 440 F, which is not the same figure
  • Publishes no overall mold size, only the cavity
  • A cylinder cavity 0.82 inches deep is a lot of chocolate for a thin cookie
3 Best for domes and chocolate bombes

Lerykin Small 15-Cavity Semi Sphere Silicone Molds N...

Two molds of fifteen semi sphere cavities each, in food grade silicone rated from minus 40 F to 446 F, released by pressing the base with a finger once the chocolate has set.

  • For it
  • Fifteen cavities per mold and two molds in the pack, so 30 domes at a time
  • Rated from minus 40 F to 446 F, with the Celsius figures matching
  • Releases by pressing the base with a finger once cooled, no twisting
  • Named for mousse, chocolate bombes, raindrop cake and jelly as well as chocolate
  • Against it
  • Publishes no cavity size at all, which on a sphere mold is the only figure that matters
  • Publishes no mold dimensions either, only a package size
  • Its size field reads Mini, which is not a measurement
4 Best for spelling something out on a cake

2PCS Silicone Molds for Chocolate

One letter mold and one number mold at 8.2 by 4.5 inches with 105 cavities between them, including hearts and the words for a birthday, in silicone rated to 450 F.

  • For it
  • 105 cavities across two molds, far more than anything else here
  • Publishes the mold size at 8.2 by 4.5 inches
  • One letter mold and one number mold, plus hearts and birthday symbols
  • Rated to 450 F, the highest upper limit of these five
  • Against it
  • Publishes its cold limit as minus 104 F and gives it as minus 40 C, and those are different temperatures
  • Publishes no cavity size, so how large a letter comes out is unknown
  • Publishes no weight and no depth
5 Best for a decorative shape on top

Pimoys 4 Pcs Flower & Bow Silicone Molds for Chocola...

Four molds of bow and flower patterns at a published 0.39 inches thick, for cake and cookie decorations, with the lowest heat rating in this group at 240 F and a top rack dishwasher instruction.

  • For it
  • Publishes a thickness of 0.39 inches for the molds
  • Four different bow and flower patterns in one pack
  • Stated for candy, jelly and fondant as well as chocolate
  • Cleaned with mild soapy water or on the top rack of a dishwasher
  • Against it
  • Rated only to 240 F, the lowest upper limit in this group by a wide margin
  • Its first bullet describes the four items as candle molds
  • States that sizes may vary between the four molds, and gives none of them

Our verdict

Husfunov is the only listing here that publishes what the finished bar measures, at 4.5 by 1.7 by 0.6 inches from a mold of 10 by 6.7 by 0.6. Actvty publishes a cavity size of 2.1 by 0.82 inches across 24 cavities. Lerykin gives 15 cavities per mold and no cavity size. OLLBIT crams 105 letters and numbers into two molds of 8.2 by 4.5 inches. Pimoys publishes 0.39 inches of thickness and the lowest heat rating here, 240 F.

“One mold tells you the size of what comes out.”

Lush Editorial Team

What separates these five

What size comes out Husfunov publishes the finished bar at 4.5 by 1.7 by 0.6 inches. Actvty publishes a 2.1 by 0.82 inch cavity. The other three publish neither.
Heat range published OLLBIT to 450 F, Husfunov and Lerykin to 446 F, Actvty given as 440 F, Pimoys only 240 F.
Where the two units disagree OLLBIT gives minus 104 F as minus 40 C. Actvty gives 230 C as 440 F. Neither pair converts.
Cavities per purchase OLLBIT 105 across two molds, Lerykin 30 across two, Actvty 24 across two, Pimoys four molds, Husfunov one tray.
Cleaning All five name a dishwasher. Pimoys specifies the top rack. Three add oven, microwave and freezer.

How we chose

Priorities, not a computed score. The inputs are published specifications, so we rank by what matters most and say how much.

  1. 30% The size of the thing the mold makesA gift kit is judged on what comes out of it, and one listing here publishes the finished piece at 4.5 by 1.7 by 0.6 inches. One publishes a cavity at 2.1 by 0.82 inches. Three publish the tray and leave the output to be discovered.
  2. 25% The heat range, and whether it convertsFour of these five are rated at or above 440 F and one only to 240 F, which is the difference between a mold you can bake in and a mold for setting chocolate. Two listings publish a Fahrenheit and a Celsius figure that are not the same temperature.
  3. 20% Depth, because filled chocolate needs itTwo of these publish a depth and both explain it: 0.6 inches is given as enough for a layer of pistachio and nut filling, and 0.39 inches is given as a decorative thickness. Depth is what separates a filled bar from a chocolate shape.
  4. 15% How much you get in one batchCavity counts here run from four separate patterned molds to 105 small cavities across two trays. Two picks ship two molds each, which for a kit matters more than it looks: one tray in the freezer and one being filled.
  5. 10% Cleaning and the rest of the kitchenEvery pick here names a dishwasher and three add oven, microwave and freezer, which turns a chocolate mold into a general baking mold. One specifies the top rack, which is the sensible instruction for thin silicone.

How the Five Compare on the Numbers

Sixteen chocolate molds sit on the fact sheet for this topic and five are here. Three of them are the same deep bar mold for filled chocolate, two published as 10 by 6.7 inches and the third a fraction narrower, with a depth given as 0.6 inches in two bullets and nothing in the third. Another listing in the pool is a bakeable plastic flan and gelatin pan rated from minus 10 F to 375 F, which is a different object.

Among the five here the useful question is what comes out. A mold is bought for the shape it makes, and the size of that shape is published by exactly one listing. A second publishes a cavity size. The remaining three publish the tray, the package, or the word Mini, and leave the output to be discovered when the chocolate sets.

Specification Husfunov Actvty Lerykin OLLBIT Pimoys
Finished piece size published 4.5 by 1.7 by 0.6 in not published not published not published not published
Cavity size published not published 2.1 by 0.82 in not published not published not published
Mold size published 10 by 6.7 by 0.6 in not published not published 8.2 by 4.5 in not published
Molds in the pack One Two Two Two Four
Cavities not published Twelve in each, 24 in total Fifteen in each 105 across both not published
Depth or thickness 0.6 in deep not published not published not published 0.39 in thick
Heat range published Minus 40 F to 446 F Given as minus 40 F to 440 F Minus 40 F to 446 F Given as minus 104 F to 450 F Minus 40 F to 240 F
Celsius figures given Minus 40 C to 230 C Minus 40 C to 230 C Minus 40 C to 230 C Minus 40 C to 232 C not published
Shape Rectangular bar, snap sections Round cylinder for a cookie Semi sphere Letters, numbers and symbols Bows and flowers
Release method stated Flexes, will not stick Non-stick and flexible Press the base with a finger Push the bottom gently Soft and flexible demolding
Cleaning Dishwasher safe Rinse or dishwasher Dishwasher safe Dishwasher safe Mild soapy water or the top rack
Weight published 0.2 lb 0.49 lb 0.35 lb not published 0.33 lb

What the table cannot tell you is how much these trays sag. Not one of these five publishes a silicone wall thickness, and a flat tray of liquid chocolate carried to a fridge is exactly where a thin mold fails. The published weights are the only proxy, and they are not directly comparable because one pick is a single tray, two are pairs and one is a set of four. On a gift kit, that is the difference between a neat bar and a spill.

The One Listing That Publishes Its Output

Mold Size and Bar Size, Both Given

Husfunov opens its first bullet with a depth and a reason: the mold is 0.6 inch deep, thick enough to add a layer of stuffed pistachio and nut filling. It then publishes the mold at 10 by 6.7 by 0.6 inches and the finished chocolate at 4.5 by 1.7 by 0.6 inches. That second figure is the one no other pick gives, and it is the one that tells you whether the bar fits the box you were going to wrap it in.

Everything else about it is ordinary in the way a good listing is ordinary. Food grade silicone, BPA free, non-stick, rated from minus 40 F to 446 F with matching Celsius figures, and stated safe in ovens, microwaves, refrigerators and dishwashers. It publishes no cavity count, so how many bars a tray yields is not stated, and at 0.2 lb it is the lowest of the four published weights here.

The Two Listings It Cannot Be Told Apart From

Two other molds in this pool are the same deep bar tray for filled chocolate and their numbers drift. One publishes the same 10 by 6.7 inches that Husfunov states and no depth at all. The other publishes a tray a fraction narrower, again with no depth. All three quote nearly the same heat range and the same pistachio filling use.

That drift across three listings for what looks like one product is worth seeing, because the depth is the difference between a tray that holds a filling and one that does not. Only one of the three publishes the finished bar, so only one of the three is on this page. The others are the same mold described more loosely.

Cavities You Can Measure, and Cavities You Cannot

A Cavity Sized Against a Cookie

Actvty publishes a cavity of 2.1 by 0.82 inches and then explains the choice, which is rarer than the measurement itself: the size is right for a cookie and does not use too much chocolate, so the ratio of chocolate to cookie comes out better. Two molds of twelve cavities give 24 in one purchase, and at 0.49 lb it is the highest of the four published weights here, which on a tray means it holds its shape when filled.

Its heat range is where it slips. It publishes minus 40 to 230 degrees Celsius and gives that as minus 40 F to 440 F. The same 230 C appears on two other picks here as 446 F. The discrepancy is small and the conversion is simply wrong, which is the sort of thing worth noticing on a listing that otherwise publishes more usable detail than most.

A Sphere Mold With No Sphere Size

Lerykin is the clearest case of a missing figure in this pool. It sells two molds of fifteen semi sphere cavities, thirty domes in total, in food grade silicone rated from minus 40 F to 446 F, released by pressing the base with a finger once the contents have cooled. It names mousse, chocolate bombes, raindrop cake, jelly and pudding among its uses.

And it never publishes the diameter of a cavity. On a semi sphere mold that is the only dimension that matters, because the size of the dome decides whether it is a truffle, a bombe or a dessert. Its size field reads Mini. Its dimension fields describe the package. A buyer wanting a specific dome size cannot get it from this listing at all.

Small Cavities and Cool Silicone

A Hundred and Five Cavities in Two Trays

OLLBIT is the outlier on density. One letter mold and one number mold, each 8.2 by 4.5 inches, carry 105 cavities between them, including hearts, other symbols and the words for a birthday greeting. For decorating a cake with a name or an age that is exactly the right tool, and it publishes the mold size, which three picks here do not.

Its temperature bullet does not hold together. It states a range of minus 104 F to 450 F and gives the same range as minus 40 C to 232 C. The upper figures match. The lower ones do not, because minus 40 C is minus 40 F, which is the figure every other pick in this group publishes. It also publishes no cavity size, and 105 cavities in a tray 8.2 inches long makes each letter very small.

The Mold You Cannot Bake In

Pimoys is rated from minus 40 F to 240 F, and the gap between that and the 446 F on three other picks is the most consequential number on this page. A mold rated to 240 F sets chocolate, fondant and jelly and does not go in an oven. Its listing is consistent about that, naming candy, jelly, fondant and cake decoration throughout, so the rating fits the use rather than contradicting it.

It publishes a thickness of 0.39 inches for four bow and flower molds, and then says sizes may vary between them without giving any. Its first bullet calls the four items candle molds, which is the sort of copy error that tells you how the text was assembled. For a gift kit it is the decorative element rather than the workhorse, and at 0.33 lb for four molds it costs almost nothing in space.

Which One Fits Your Kitchen

Wrapping a bar as a present. Husfunov, the only mold here that publishes what comes out, at 4.5 by 1.7 by 0.6 inches from a tray of 10 by 6.7 by 0.6, deep enough for a pistachio filling and rated from minus 40 F to 446 F.

Chocolate covered cookies. Actvty, two molds of twelve round cavities each with every cavity published at 2.1 by 0.82 inches, sized against a cookie rather than guessed at, and the highest of the four published weights here at 0.49 lb.

Domes, bombes and truffles. Lerykin, thirty semi sphere cavities across two molds rated from minus 40 F to 446 F, released with a finger press on the base. It never publishes a dome diameter, so expect to find out.

A name or an age on a cake. OLLBIT, a letter mold and a number mold at 8.2 by 4.5 inches with 105 cavities between them, rated to 450 F. Read its cold rating as the minus 40 C it also states.

Decoration rather than the main event. Pimoys, four bow and flower molds at a published 0.39 inches thick for cake and cookie tops, cleaned on the top rack. Rated only to 240 F, so nothing baked.

What We Could Not Verify

Every figure above comes from the maker’s own listing text. These are the things we went looking for and could not source in any of them.

  • Three of these five publish no cavity size, so the finished piece cannot be sized before it arrives.
  • Two listings publish heat ranges whose Fahrenheit and Celsius figures do not convert to each other.
  • None of the five publishes a silicone wall thickness, so how far a full tray sags when carried is unstated.
  • Lerykin publishes no dome diameter, which is the one figure a semi sphere mold needs.
  • Pimoys states that its four molds may vary in size and publishes none of them.
  • No listing says how many finished pieces a single tray yields, even where a cavity count is given.

Frequently asked questions

Which mold tells you how big the chocolate will be?+

Husfunov, and it is alone among the five. Its first bullet publishes the mold at 10 by 6.7 by 0.6 inches and then the finished chocolate at 4.5 by 1.7 by 0.6 inches, which is the figure anyone wrapping a bar as a gift actually needs. Actvty gets halfway there by publishing a cavity of 2.1 by 0.82 inches. The other three publish a tray size or a package size and leave the size of the output to be found out after the first batch.

Do these heat ratings make sense?+

Two of them do not convert. OLLBIT states that it withstands temperatures from minus 104 F to 450 F and gives the same range as minus 40 C to 232 C. The upper pair matches. The lower pair does not, because minus 40 C is minus 40 F. Actvty states minus 40 to 230 degrees Celsius and gives that as minus 40 F to 440 F, where 230 C is the 446 F that two other listings here publish. The figures are close enough not to matter in a kitchen and they still show how these bullets are written.

How deep does a mold need to be for filled chocolate?+

Two listings answer it and both give the same figure for the same reason. Husfunov publishes 0.6 inches and says that is thick enough to add a layer of stuffed pistachio and nuts. One of the near identical bar molds left off this page publishes 0.6 inches of thickness as enough to hold a layer of pistachio and nut filling, in almost the same words. Pimoys is 0.39 inches, which is a decorative thickness rather than a filled one, and the other two picks publish no depth at all.

Which is the odd one out on temperature?+

Pimoys, by a long way. It publishes a range of minus 40 F to 240 F while three other picks reach 446 F or 450 F. That is the difference between a mold you can put in an oven and a mold for setting chocolate, fondant or jelly and nothing hotter. Its own listing is consistent about the use, naming candy, jelly and fondant and cake decoration, so the low rating is not a contradiction. It does mean this is not the mold in a kit for baking.

What is wrong with the Pimoys description?+

Its first bullet calls them candle molds. The product is four silicone molds with bow and flower patterns for chocolate, candy and cake decoration, the rest of the listing says so repeatedly, and the first bullet still reads that the pack contains four beautiful candle molds. The same bullet publishes the one measurement in the listing, a thickness of 0.39 inches, and the last bullet says sizes may vary between the four without giving any of them.

What was left out of this shortlist and why?+

Two near duplicates of the bar mold and one mold that is not for chocolate. Three listings in this pool are the same deep bar mold for filled chocolate, two of them published as 10 by 6.7 inches and the third a fraction narrower, with a depth of 0.6 inches in two bullets and nothing in the third. Only one of them publishes the finished bar size, so only that one is here. The excluded mold is a bakeable plastic mini flan and gelatin pan rated from minus 10 F to 375 F, sold in a pack of 25 as a substitute for foil pans.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.