Lush Food & Drink

Buying Guide ·Prep

Best Mandoline Safety Gloves and Guards With Steel Parts

The deciding specification is where the stainless steel actually sits, because only three of these five publish any steel at all: one knits it through the glove, one makes the whole finger sleeve of it, one puts it in the prongs and nowhere else.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

I read every material sentence, cut rating, care instruction and published dimension across the sixteen mandoline safety listings in this pool, then checked each maker's own size wording against the dimension fields.

Our shortlist

Five products, one set of published numbers.
  1. Mercer Culinary Millennia Level A5 Cut Glove
    Best for steel knitted into the glove itself

    Mercer Culinary Millennia Level A5 Cut Glove

    The only glove in this fact sheet that says metal is part of the fabric. Its construction bullet reads stainless steel reinforced knit and puts ANSI level A5 beside it, and the same bullet carries the warning the other listings skip: not cut proof, not puncture resistant, not for use with moving or serrated blades. It is also the only pick with a thickness figure of any kind, described as a medium weight 10 gauge glove, and the only one whose care line carries temperatures.

    • Mercer Culinary
    • Large
    • Weight not listed
  2. 3 Pack Food Safety Holder with Finger Guard for Grat...
    Best for finger sleeves that are steel all through

    3 Pack Food Safety Holder with Finger Guard for Grat...

    Where Mercer reinforces fabric with steel, this listing makes the part out of it. Two of its five bullets call the product stainless steel protective finger sleeves and a stainless steel finger guard set, so there is no softer material wrapped around the metal. One purchase brings three sleeves and the published weight of 0.28 lb covers all three together. The dimension fields describe the pack rather than a sleeve, so the maker's own size line, 9.4 x 8 x 2.2 cm, is the figure to use.

    • Hemobllo
    • 9.4X8X2.2CM
    • 0.28 lb
  3. Kichvoe Mandoline Slicer Hand Guard Red Food Safety ...
    Best for a dishwasher safe guard with steel teeth

    Kichvoe Mandoline Slicer Hand Guard Red Food Safety ...

    Steel here is confined to the prongs that grip a potato, a cucumber, a carrot or a piece of firm cheese, and the body stays plastic. The listing is the only one on this page that clears steel and plastic together, stating that the plastic body and stainless steel prongs are both dishwasher safe. It is also the only pick that publishes its own measurement in a sentence, 4.52 x 4.24 x 1.97 inches, and it tells you to compare that against your slicer's cutting surface before buying.

    • Kichvoe
    • 11.50X10.80X5.00CM
    • Weight not listed
  4. NoCry Premium Cut Resistant Gloves Food Grade - 100%...
    Best for a cook who wants no metal in the glove

    NoCry Premium Cut Resistant Gloves Food Grade - 100%...

    This is the pick that names steel in order to argue with it. Its first bullet claims the glove is four times better at protecting you than leather and ten times better than steel, and a later one contrasts its breathable fabric with metal or chainmail gloves for cutting food. It cites EN388:2016 Level 5 and ANSI 105-2016, the only European standard on this page, and at 0.09 lb it is the lighter of the two weights published here. It is ambidextrous and machine washable.

    • NoCry
    • Medium
    • 0.09 lb
  5. Hadnves Safety Hand Guard for Mandoline Slicers or G...
    Best for a guard that names its own plastic

    Hadnves Safety Hand Guard for Mandoline Slicers or G...

    The only hand guard in this fact sheet that says what it is molded from. Its durability bullet names ABS and calls it impact resistant, where lyvantha, ZKIRON and Sewroro all describe themselves as high strength or high quality materials without naming one. It publishes 2.95 by 3.15 by 0.71 in, states One Size, and asks only that you rinse it with water. No dishwasher clearance is published, and no weight.

    • Hadnves
    • One Size
    • Weight not listed

Side by side

Blank means the maker does not publish it.
ModelBrandSize (capacity)WeightBest for
Mercer Culinary Millennia Level A5 Cut Glove Mercer Culinary Large not published Best for steel knitted into the glove itself
3 Pack Food Safety Holder with Finger Guard for Grat... Hemobllo 9.4X8X2.2CM 0.28 lb Best for finger sleeves that are steel all through
Kichvoe Mandoline Slicer Hand Guard Red Food Safety ... Kichvoe 11.50X10.80X5.00CM not published Best for a dishwasher safe guard with steel teeth
NoCry Premium Cut Resistant Gloves Food Grade - 100%... NoCry Medium 0.09 lb Best for a cook who wants no metal in the glove
Hadnves Safety Hand Guard for Mandoline Slicers or G... Hadnves One Size not published Best for a guard that names its own plastic

Each pick in detail

What the listing says for it, and against it.
1 Best for steel knitted into the glove itself

Mercer Culinary Millennia Level A5 Cut Glove

The only glove in this fact sheet that says metal is part of the fabric. Its construction bullet reads stainless steel reinforced knit and puts ANSI level A5 beside it, and the same bullet carries the warning the other listings skip: not cut proof, not puncture resistant, not for use with moving or serrated blades. It is also the only pick with a thickness figure of any kind, described as a medium weight 10 gauge glove, and the only one whose care line carries temperatures.

  • For it
  • The only pick with stainless steel in the fabric you wear
  • Cites ANSI level A5, and says what the rating excludes
  • The only care line with figures: below 180 F wash, below 160 F dry, under 10 minutes
  • Publishes a knit gauge, described as medium weight 10 gauge
  • Against it
  • Its weight field is too small to be a glove, so the sheet discards it
  • States it is not cut proof and not for moving or serrated blades
  • Does not say how much steel is in the knit or where it runs
2 Best for finger sleeves that are steel all through

3 Pack Food Safety Holder with Finger Guard for Grat...

Where Mercer reinforces fabric with steel, this listing makes the part out of it. Two of its five bullets call the product stainless steel protective finger sleeves and a stainless steel finger guard set, so there is no softer material wrapped around the metal. One purchase brings three sleeves and the published weight of 0.28 lb covers all three together. The dimension fields describe the pack rather than a sleeve, so the maker's own size line, 9.4 x 8 x 2.2 cm, is the figure to use.

  • For it
  • Stainless steel is the sleeve itself, not a reinforcement
  • Three sleeves in one purchase
  • States a size in its own words, 9.4 x 8 x 2.2 cm
  • Publishes a weight, 0.28 lb for the set
  • Against it
  • No washing or drying instruction of any kind
  • The 0.28 lb covers three sleeves, so a single sleeve weight is unknown
  • Cites no cut rating, so the steel has no tested figure behind it
3 Best for a dishwasher safe guard with steel teeth

Kichvoe Mandoline Slicer Hand Guard Red Food Safety ...

Steel here is confined to the prongs that grip a potato, a cucumber, a carrot or a piece of firm cheese, and the body stays plastic. The listing is the only one on this page that clears steel and plastic together, stating that the plastic body and stainless steel prongs are both dishwasher safe. It is also the only pick that publishes its own measurement in a sentence, 4.52 x 4.24 x 1.97 inches, and it tells you to compare that against your slicer's cutting surface before buying.

  • For it
  • Clears both the plastic body and the steel prongs for a dishwasher
  • Publishes its own measurement in a sentence, 4.52 x 4.24 x 1.97 inches
  • Tells you to check the guard against your slicer before buying
  • Names what the prongs are for, gripping potato, cucumber, carrot or firm cheese
  • Against it
  • Publishes no weight
  • Says nothing about how thick the prongs are or how many
  • Its dimension fields swap two of the three figures its own bullet gives
4 Best for a cook who wants no metal in the glove

NoCry Premium Cut Resistant Gloves Food Grade - 100%...

This is the pick that names steel in order to argue with it. Its first bullet claims the glove is four times better at protecting you than leather and ten times better than steel, and a later one contrasts its breathable fabric with metal or chainmail gloves for cutting food. It cites EN388:2016 Level 5 and ANSI 105-2016, the only European standard on this page, and at 0.09 lb it is the lighter of the two weights published here. It is ambidextrous and machine washable.

  • For it
  • Cites two ratings, EN388:2016 Level 5 and ANSI 105-2016
  • Publishes a weight, 0.09 lb, the lighter of the two weights here
  • Ambidextrous, so one glove fits either hand
  • Machine washable with no special handling stated
  • Against it
  • Describes its material two ways in one bullet, cut resistant material and kevlar
  • Gives no wash temperature to go with machine washable
  • The steel comparison is a claim about protection, not a published test result
5 Best for a guard that names its own plastic

Hadnves Safety Hand Guard for Mandoline Slicers or G...

The only hand guard in this fact sheet that says what it is molded from. Its durability bullet names ABS and calls it impact resistant, where lyvantha, ZKIRON and Sewroro all describe themselves as high strength or high quality materials without naming one. It publishes 2.95 by 3.15 by 0.71 in, states One Size, and asks only that you rinse it with water. No dishwasher clearance is published, and no weight.

  • For it
  • Names ABS, where three other guards in this pool name nothing
  • Publishes all three dimension fields, 2.95 by 3.15 by 0.71 in
  • Calls the material impact resistant and says it is for daily use
  • Cleaning is a rinse, with no conditions attached
  • Against it
  • No dishwasher clearance is published
  • No weight is published
  • Contains no metal, so it is the wrong pick if steel is what you came for

Our verdict

Mercer Culinary is the only glove here with steel in it, a stainless steel reinforced knit rated ANSI level A5. Hemobllo makes the finger sleeves themselves out of stainless steel and sends three. Kichvoe puts steel only in the prongs and keeps the body plastic, and clears both for a dishwasher. NoCry names steel to reject it, claiming its fabric is ten times better. Hadnves names ABS and no metal at all.

“Three of five publish steel. Two name what they use instead.”

Lush Editorial Team

What separates these five

Three of five publish steel Mercer Culinary reinforces a knit with it, Hemobllo makes the finger sleeves from it, Kichvoe uses it for the prongs. The other two name no steel anywhere.
One pick names steel to reject it NoCry claims its fabric is four times better than leather and ten times better than steel, and contrasts itself with metal or chainmail gloves.
Only one listing clears steel for a dishwasher Kichvoe states that the plastic body and the stainless steel prongs are both dishwasher safe. Hemobllo, which is all steel, publishes no washing rule at all.
Two picks cite a cut rating, three cite none Mercer Culinary cites ANSI level A5. NoCry cites EN388:2016 Level 5 and ANSI 105-2016. Kichvoe, Hemobllo and Hadnves cite nothing.
Seven of sixteen listings are slicers, not safety gear Their stainless steel is the blade you are protecting yourself from, so they are the wrong tool for this page and none of them is picked.

How we chose

Priorities, not a computed score. The inputs are published specifications, so we rank by what matters most and say how much.

  1. 35% Whether stainless steel is named, and whereMercer Culinary knits it through the glove, Hemobllo makes the finger sleeves out of it, Kichvoe confines it to the prongs. NoCry names steel only to say its fabric beats it, and Hadnves names ABS instead. That is the whole range this pool offers, and no listing publishes how much steel it contains.
  2. 25% A cut rating published beside the materialMercer Culinary cites ANSI level A5 and adds that the glove is not cut proof or puncture resistant. NoCry cites EN388:2016 Level 5 and ANSI 105-2016. The three remaining picks cite no standard at all, so their materials carry no tested figure, steel or plastic.
  3. 18% What washing the steel is allowed to involveKichvoe clears body and prongs for a dishwasher. Mercer allows a machine below 180 F, a dryer below 160 F for under 10 minutes, a hand wash or a dishwasher. NoCry says machine washable. Hadnves says rinse. Hemobllo, the all steel pick, says nothing.
  4. 12% Whether the maker states a size in its own wordsKichvoe writes 4.52 x 4.24 x 1.97 inches into a bullet and Hemobllo writes 9.4 x 8 x 2.2 cm into its size line. Mercer gives Large, NoCry gives Medium and Hadnves gives One Size, which tells you nothing about whether the part fits your slicer.
  5. 10% Whether the published figures agree with each otherKichvoe's fields swap two of the three numbers its own bullet states, and the metric size string shows why. Mercer's weight field is far too small for a glove and is discarded. Hemobllo's dimension fields describe a pack of three, so they are set aside as a package figure.

How the Five Compare on the Numbers

Three of these five listings put stainless steel somewhere you can point to, and each puts it in a different place. Mercer Culinary knits it through the glove. Hemobllo makes the finger sleeves out of it. Kichvoe uses it only for the prongs that grip the food. The remaining two name no steel at all, and one of them names steel only to say its own material beats it.

What none of them publishes is how much steel, or where in the weave, or how thick the prongs are. The sheet is thin on exactly the figure a steel question wants. So the table below carries the material sentence each maker wrote, the cut rating each one cites, the dimension fields as published and the two weights that survive a sanity check.

Mercer Culinary Hemobllo Kichvoe NoCry Hadnves
Form Cut glove Finger sleeve set Hand guard and food holder Cut glove Hand guard
Where the steel is Through the knit The sleeves themselves The prongs only Named, then rejected not published
Material the maker names Stainless steel reinforced knit Stainless steel Plastic body with stainless steel prongs Cut resistant material, called kevlar gloves in the same bullet ABS
Cut rating cited ANSI level A5 not published not published EN388:2016 Level 5 and ANSI 105-2016 not published
Knit gauge 10 gauge not published not published not published not published
Published width 5 in not published, the fields describe the pack 4.25 in 4.33 in 2.95 in
Published second figure 8 in not published, the fields describe the pack 4.53 in 8.66 in 3.15 in
Published height 1 in not published, the fields describe the pack 1.97 in 0.2 in 0.71 in
Package figure for the pack not applicable 3.15 x 3.74 x 1.18 in for the pack of three not applicable not applicable not applicable
Published weight not published 0.28 lb not published 0.09 lb not published
Size the maker states Large 9.4 x 8 x 2.2 cm 4.52 x 4.24 x 1.97 in Medium One Size
Washing Machine wash below 180 F, machine dry below 160 F for no longer than 10 minutes, hand wash or dishwasher also allowed not published Plastic body and steel prongs both dishwasher safe Machine washable Rinse with water
Pieces in one purchase One Three One One One

The table cannot tell you whether the steel in the Mercer knit runs through every strand or sits in a core yarn, and it cannot tell you how thick the Kichvoe prongs are. It also cannot tell you what the Hemobllo sleeves weigh individually, because the 0.28 lb figure covers the pack of three. Steel is named, located and nothing more.

Where the Steel Actually Sits

Steel Knitted Into the Glove

Mercer Culinary is the only glove in this fact sheet that says metal is part of the fabric. Its construction bullet reads stainless steel reinforced knit, and the rating it puts beside that is ANSI level A5. The same bullet carries a warning most listings here leave out entirely: not cut proof, not puncture resistant, and not to be used with moving or serrated blades.

That warning matters more than the steel does. A mandoline blade does not move, so the glove is inside its stated use, but a spinning grater drum or a serrated bread knife is outside it. Mercer also publishes a knit weight, described as a medium weight 10 gauge glove, which is the only thickness figure of any kind in this whole page.

Steel as the Whole Sleeve, or Only the Prongs

Hemobllo takes the opposite approach and makes the part itself out of metal. Two of its five bullets call the product stainless steel protective finger sleeves and a stainless steel finger guard set, so the steel is not reinforcement inside something softer, it is the object. One purchase brings three of them, and the published weight of 0.28 lb covers all three together.

Kichvoe sits between the two. Its body is plastic and only the prongs that bite into a potato or a piece of firm cheese are stainless steel, which the listing states twice: once to explain what the prongs do and once to say that the body and the prongs are both dishwasher safe. That second sentence is the only place in this page where a maker clears steel and plastic together.

What the Two Steel Free Picks Name Instead

A Fiber That Advertises Itself Against Steel

NoCry is the most interesting listing here precisely because it has no steel in it. Its first bullet claims the glove is four times better at protecting you than leather and ten times better than steel, and a later bullet says the material is breathable, as opposed to metal or chainmail gloves for cutting food. Steel is the thing it is arguing with.

It backs the claim with the two ratings it cites, EN388:2016 Level 5 and ANSI 105-2016, and it is the only pick here that names a European standard at all. The material itself is described loosely, as the highest level of cut resistant material on the market and as kevlar gloves in the same sentence, which are not the same statement and the listing does not reconcile them.

A Guard That Publishes Its Plastic

Hadnves is the only hand guard in this fact sheet that names the polymer it is molded from. Its durable material bullet says ABS, calls it impact resistant, and leaves it there. That is more than lyvantha, ZKIRON or Sewroro manage: all three of those describe themselves as high strength impact resistant materials or high quality material without ever naming one.

Naming ABS is worth something on a steel page, because it settles a question the other guards leave open. If you want no metal near a blade, Hadnves is the only listing here that tells you in writing what you are holding. Its cleaning instruction is equally plain, rinse with water, and it publishes no dishwasher clearance to go with it.

Care Rules, Cut Ratings and Figures That Do Not Line Up

Washing Changes With the Material

Mercer publishes the most detailed care instruction on this page and the only one with numbers in it: wash in a machine on a normal cycle with water not exceeding 180 F, machine dry at temperatures not above 160 F, and not for longer than 10 minutes. It then adds that the glove may be hand washed or put in a dishwasher instead, which is unusual for a knitted glove.

NoCry says machine washable and nothing more, with no temperature attached. Kichvoe clears its plastic body and its steel prongs for a dishwasher. Hadnves says rinse with water. Hemobllo, the one pick made entirely of stainless steel, publishes no washing instruction at all, which is the gap I would most want closed before buying three of them.

Two Listings Whose Own Figures Disagree

The Mercer listing carries a weight field so small that it cannot describe a glove, and the fact sheet discards it, so Mercer publishes 5 by 8 by 1 in and no weight I would repeat. Hemobllo is a pack of three, so its dimension fields describe the carton and were moved aside; the listing’s own size line reads 9.4 x 8 x 2.2 cm.

Kichvoe is the useful case. Its fields read 4.25 and 4.53 and 1.97 in, and its own bullet says the guard measures 4.52 x 4.24 x 1.97 inches. Those are the same three numbers with the first two swapped, which is exactly what happens when a metric size string, here 11.50 x 10.80 x 5.00 cm, is converted into fields nobody checks. I used the maker’s sentence.

Which One Fits Your Kitchen

The cook who wants steel in a glove. Mercer Culinary is the only pick that puts stainless steel in the fabric you wear, with ANSI level A5 beside it and a 10 gauge knit. Read its warning about moving and serrated blades before you buy, because it is written into the same bullet.

The cook who would rather not wear anything. Hemobllo gives you three stainless steel finger sleeves instead of a glove, so your hand stays bare and only the fingertips are covered. Nothing is published about how they fasten or how to wash them, which is a real gap.

The cook feeding a mandoline all evening. Kichvoe is the pick to reach for, because steel prongs hold a potato while your palm stays on a plastic dome, and both halves are cleared for a dishwasher. It states 4.52 x 4.24 x 1.97 inches so you can check it against your slicer first.

The cook who wants no metal at all. NoCry names two standards, EN388:2016 Level 5 and ANSI 105-2016, and argues that its fabric beats steel rather than containing it. At 0.09 lb it is the lighter of the two weights published here, and it is machine washable.

The cook who wants a plain plastic guard. Hadnves is the only guard here that names ABS instead of describing an unnamed high strength material. It publishes 2.95 by 3.15 by 0.71 in and asks only that you rinse it, with no dishwasher clearance to lean on.

What We Could Not Verify

Every question below was asked of the listings and answered by none of them.

  • How much stainless steel is in the Mercer knit, or whether it is a core yarn or a wrap.
  • The thickness of the Kichvoe prongs, or how many there are.
  • Any washing or drying instruction for the Hemobllo stainless steel sleeves.
  • What the NoCry fabric actually is, given that the same bullet calls it both the highest level of cut resistant material and kevlar.
  • Whether the Hadnves ABS guard may go in a dishwasher, since only a rinse is published.
  • A published weight for Mercer Culinary, Kichvoe or Hadnves, none of which states one this sheet will accept.

Frequently asked questions

Which of these actually contains stainless steel?+

Three of the five. Mercer Culinary states stainless steel reinforced knit construction, so the metal is inside the glove fabric. Hemobllo calls its product stainless steel protective finger sleeves, so the part is metal rather than containing metal. Kichvoe puts stainless steel in the prongs only and keeps the body plastic. NoCry and Hadnves name no steel at all, and Hadnves names ABS in its place.

Is a steel reinforced glove safer than a fabric one?+

The listings do not answer that, and the two ratings they cite are not directly comparable. Mercer Culinary cites ANSI level A5 for its steel reinforced knit. NoCry cites EN388:2016 Level 5 and ANSI 105-2016 for a fabric it says is ten times better than steel. One is an American scale and the other pairs a European standard with an American one, so the sheet gives you no single number to rank them by.

Can any of the steel parts go in a dishwasher?+

Only Kichvoe says so, and it says it clearly: the plastic body and the stainless steel prongs are both dishwasher safe. Mercer Culinary allows a dishwasher for its glove as an alternative to a machine wash below 180 F. Hemobllo, the one pick made entirely of stainless steel, publishes no washing instruction at all, which is the gap I would most want closed before buying a set of three.

Why is a hand guard on a page about safety gloves?+

Because the pool is mandoline safety gear rather than gloves alone, and the steel question is answered mostly by guards. Of the sixteen listings in this fact sheet, nine are safety parts and seven are mandoline slicers whose stainless steel is the blade. Restricting the page to gloves would leave two picks that publish steel, so the three guards are named as guards throughout.

What does the 10 gauge figure on the Mercer glove mean?+

The listing says medium weight 10 gauge glove and stops there, so what it means for this product is not published. Gauge in knitting describes how many stitches sit in a given width, and a lower number means a coarser, heavier knit. It is the only thickness figure of any kind on this page, and no other pick publishes anything comparable, so it cannot be ranked against the rest.

Which of these five is the lightest?+

Only two publish a weight the sheet will accept. NoCry publishes 0.09 lb for one glove and Hemobllo publishes 0.28 lb for a pack of three sleeves, so NoCry is the lighter of the two. Mercer Culinary, Kichvoe and Hadnves publish no usable weight: the Mercer field is far too small to describe a glove and is discarded, and the other two state none.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.