How the Five Compare on the Numbers
The five picks split into two groups. Four are press style machines that close over a plate: the Westinghouse WKRM293, the Brentwood, the Orixforce and the JTLB. The fifth, the VEVOR, is a countertop machine with rollers and a conveyor, and it is the only one rated to press up to 1,400 tortillas per hour. Plate sizes run from 8 inches on the Westinghouse to 12 inches on the Orixforce.
Weight separates them just as sharply. The Westinghouse is the lightest of the five at 3.0 pounds, the Brentwood is 3.7 pounds and the Orixforce is 5.8 pounds. The VEVOR is the heaviest at 111.33 pounds. The JTLB does not publish a weight. Wattage is stated by one maker only: 1000 watts for the Westinghouse, at 110 to 120 volts and 60 Hz.
The table does not tell you how any of these machines cooks. It lists what each maker publishes: plate size, weight, dimensions, control type and, for one machine, throughput. It cannot say whether a 12 inch plate browns more evenly than an 8 inch one, because no maker on this sheet publishes a browning test. Read the numbers as fit and capability, not as results.
Plate Size and What It Decides
The press picks and their published diameters
The Orixforce publishes a 12 inch plate, the largest diameter among the press style picks. The Brentwood publishes a 10 inch nonstick surface. The Westinghouse WKRM293 is rated for 8 inch rotis and tortillas. The JTLB publishes a 25.5 cm heating surface, which is close to 10 inches. A buyer pressing a 12 inch tortilla needs the Orixforce, because the other three publish smaller surfaces.
Diameter is not the only fit question. The Westinghouse publishes an 8.0 inch width, an 11.8 inch depth and a 7.0 inch height, the smallest footprint of the four press picks. The Orixforce publishes a 15.5 inch width, a 12.0 inch depth and an 8.5 inch height. A small counter favors the Westinghouse on the published figures alone.
The VEVOR works differently
The VEVOR does not press a single tortilla between two plates. Its listing describes a top roller entrance, a conveyor system and a 5.5 inch roller mold, with thickness adjustable from 1 to 5 mm. It is rated to press up to 1,400 tortillas per hour. That is a production figure, and no other maker on this sheet publishes one.
The trade is size and weight. The VEVOR publishes a 19.29 inch width, a 27.95 inch depth and a 17.72 inch height, and it weighs 111.33 pounds. The Westinghouse weighs 3.0 pounds. A buyer who wants one tortilla at a time and a machine that stores in a cabinet is looking at the Westinghouse, not the VEVOR.
Controls, Power and Cleaning
What each control actually adjusts
The Brentwood publishes a 6 setting browning control, the only numbered setting count on this sheet. The JTLB publishes a knob temperature control. The Orixforce publishes adjustable heat for soft or crispy results. The Westinghouse WKRM293 publishes an adjustable thermostat. The VEVOR publishes a thickness knob, which changes tortilla thickness rather than heat.
Indicator lights are common. The Westinghouse publishes a red power light and a green ready light. The Brentwood publishes power and ready indicator lights. The Orixforce publishes power and preheat indicator lights. Neither the JTLB nor the VEVOR publishes an indicator light of any kind.
Power and cleaning claims
Wattage is published for the Westinghouse only, at 1000 watts, 110 to 120 volts, 60 Hz. The Brentwood, Orixforce, JTLB and VEVOR listings do not state a wattage. That is a real gap: a buyer comparing power draw has one published figure to work from and four makers who say nothing.
Cleaning guidance is published in different forms. The Westinghouse states the machine should be cleaned with a slightly wet cloth. The Brentwood, Orixforce and JTLB describe a nonstick surface that wipes clean. The VEVOR describes a food grade nonstick coating on the rollers and conveyor. None of the five publishes a dishwasher safe claim.
Footprint, Handling and What Else They Make
Counter space against plate size
Footprint does not track plate size the way you would expect. The Westinghouse publishes 8.0 by 11.8 by 7.0 inches around an 8 inch plate, which is about as tight as a press can be. The Orixforce publishes 15.5 by 12.0 by 8.5 inches around a 12 inch plate, so a wider tortilla costs a good deal more counter than the plate figure alone suggests.
The Brentwood publishes 10.0 by 13.0 by 8.5 inches and the JTLB 11.42 by 13.78 by 7.87 inches, so the two middle sized presses need about the same space. The VEVOR is in another category: 19.29 by 27.95 by 17.72 inches and 111.33 pounds, which is a dedicated table rather than a cupboard shelf. The Westinghouse at 3.0 pounds and the Brentwood at 3.7 are the two a person moves without thinking about it.
What each maker says it can cook
Three of the five say what else they make. The Orixforce names roti and chapati alongside tortillas. The Westinghouse names rotis in its own title and sells itself as a roti maker as much as a tortilla maker. The VEVOR goes furthest, naming Sopes, Gorditas, Roti, Pita and tortilla pizza, and names food trucks, fast food shops and cafeterias as the places it is meant for.
The Brentwood says nothing about other foods at all. The JTLB is less consistent: its title sells a tortilla and roti maker while one of its own bullets calls it a pizza maker and another calls its output pancakes. None of the five states a dough quantity, a resting time or a finished tortilla thickness, except the VEVOR, which gives 1 to 5 mm on its roller.
Which One Fits Your Kitchen
Small kitchen buyer. The Westinghouse WKRM293 is the lightest of the five at 3.0 pounds and publishes the smallest footprint, at 8.0 inches wide and 7.0 inches tall. It is rated for 8 inch tortillas, so a larger diameter is not possible on this machine.
Browning control buyer. The Brentwood is the only pick that publishes a numbered setting count, a 6 setting browning control, on a 10 inch nonstick surface. It also publishes a cool touch handle and a brushed stainless steel finish.
Large tortilla buyer. The Orixforce publishes a 12 inch plate, the largest diameter among the press picks, with adjustable heat and nonstick aluminum plates. It weighs 5.8 pounds and publishes an 8.5 inch height.
Knob control buyer. The JTLB publishes a 25.5 cm heating surface, a knob temperature control and a stainless steel cover. It does not publish a weight, so a buyer who needs to know the shipping weight should ask the seller.
High volume buyer. The VEVOR is rated to press up to 1,400 tortillas per hour with thickness from 1 to 5 mm. It weighs 111.33 pounds and publishes a 27.95 inch depth, so it needs a dedicated counter or table.
What We Could Not Verify
Several figures a buyer would want are not published by the makers, and no estimate is offered here.
- The wattage of the Brentwood, Orixforce, JTLB and VEVOR tortilla makers is not published.
- The weight of the JTLB is not published.
- The finished tortilla diameter the VEVOR produces, since it publishes a 5.5 inch roller mold rather than an output size.
- No maker on this sheet publishes a browning test, a heat up time or a temperature range in degrees.
- No maker on this sheet publishes a warranty term, and none publishes a dishwasher safe claim.
- No maker on this sheet publishes a cord length or a stated counter clearance.