Explainer
How to clean a sandwich maker after use
Unplug it, let it cool a little while still warm, wipe the plates with a damp cloth, lift off stuck crumbs and melted cheese gently, then dry it. Never immerse it in water, because the electrics are sealed inside.
By the Lush Editorial Team·Researched & Compared
Cleaning a sandwich maker is quick if you do it right after use. Unplug it and let it cool until it is warm but safe to touch, then wipe the plates with a damp cloth to lift crumbs and melted cheese, easing off any stuck bits gently without scraping with metal, and finish by drying it. The one rule that never bends is that you never immerse a sandwich maker in water or hold it under the tap, because its heating element and wiring are sealed inside the body. Our Best Sandwich Makers compares the published figures of five of them.
Clean it while it is still warm
The best time to clean a sandwich maker is just after use, while the plates are still warm but no longer hot. At that point, grease and melted cheese are soft and wipe away easily, whereas if you leave them to cool fully they harden onto the plates and become far more stubborn. Timing is the single biggest thing that makes cleaning easy or hard.
So the routine starts the moment you have finished toasting: unplug the machine at the wall, open it, and let it sit a few minutes until the plates are warm rather than scorching. Working at that warm stage, before the residue sets, is why many people find a sandwich maker almost self-cleaning if they wipe it promptly, and a chore if they leave it overnight.
Wiping the plates
With the machine unplugged and warm, wipe the cooking plates with a damp cloth or paper towel to pick up loose crumbs and smears of grease and cheese. For non-stick plates, which most sandwich makers have, this soft wiping is usually all that is needed, and it protects the coating from damage that scrubbing would cause.
For anything stuck on, dampen the spot and give it a minute to soften, then wipe again, or use a soft sponge or a wooden or silicone tool to ease it off gently. Never use a knife, metal scourer or abrasive pad on the plates, because these scratch and ruin the non-stick surface, which then makes future sticking worse. Patience and a soft touch beat force every time.
Dealing with baked-on cheese
Melted cheese that has run onto the plates and hardened is the classic sandwich-maker mess. The trick is to soften it rather than scrape it: lay a damp, warm cloth or piece of damp paper towel over the stuck cheese for a few minutes while the plate is still warm, and the moisture and heat loosen it so it wipes away.
If cheese or filling has dripped into the hinge or the gaps, let it cool and harden slightly, then it often lifts off in a piece, or brush it out gently with a dry pastry brush or soft toothbrush. Catching spills before they bake on repeatedly is easier than removing a built-up layer, which is another reason to clean after each use rather than letting it accumulate.
What never to do
The absolute rule is never to immerse the sandwich maker in water, put it in the sink, or hold it under a running tap, because the heating element and electrical parts live sealed inside the body and water reaching them is both unsafe and ruinous to the machine. Only the external plates are wiped; the electrics stay dry.
Likewise, do not use harsh chemical cleaners or oven sprays on the plates, as residue can taint the next sandwich and some cleaners damage non-stick, and avoid abrasive scourers. A damp cloth, mild soap if needed on a stubborn greasy patch, and a thorough wipe-off with a clean damp cloth are all a sandwich maker should ever meet. If plates are removable and labelled dishwasher-safe, those specific plates can be washed, but the body never.
Drying and storing
Once wiped clean, dry the plates and any wiped surfaces with a cloth or leave the open machine to air a few minutes, so no moisture is trapped when you close and store it. Putting it away damp risks smells and, over time, corrosion around the plates, so a dry finish matters as much as the cleaning itself.
Store the sandwich maker closed and upright, with the cord wrapped as the machine allows, somewhere dry. A quick wipe after every use, done warm, keeps it in good order indefinitely and means you never face a hard-baked build-up, so the small habit after each toastie is what keeps the cleaning genuinely quick.
The short answer
To clean a sandwich maker after use, unplug it and let the plates cool to warm, then wipe them with a damp cloth to remove crumbs, grease and cheese while the residue is still soft, laying a damp cloth over any stuck cheese to loosen it and easing off stubborn bits with a soft sponge or wooden tool, never metal or abrasives. Dry it before storing. Never immerse the machine or hold it under the tap, since the electrics are sealed inside, and skip harsh chemicals. Cleaning promptly while warm, every time, is what keeps it effortless.
Common questions
How do you clean a sandwich maker after use?
Unplug it and let the plates cool to warm, then wipe them with a damp cloth to remove crumbs, grease and cheese while the residue is still soft. Ease off any stuck bits gently with a soft sponge or wooden tool, then dry it before storing. Never immerse the machine in water, since the electrics are sealed inside.
When is the best time to clean a sandwich maker?
Just after use, while the plates are still warm but safe to touch. At that point grease and melted cheese are soft and wipe away easily, whereas once they cool fully they harden onto the plates and become stubborn. Wiping promptly while warm is the single biggest thing that keeps cleaning quick and easy.
How do you remove baked-on cheese from a sandwich maker?
Soften it rather than scrape it. Lay a damp, warm cloth or piece of damp paper towel over the stuck cheese for a few minutes while the plate is still warm, and the moisture and heat loosen it so it wipes away. Cheese in the hinge often lifts off once slightly cooled, or brush it out gently with a soft brush.
Can you put a sandwich maker in water?
No, never immerse the machine, put it in the sink, or hold it under a running tap, because the heating element and wiring are sealed inside the body and water reaching them is unsafe and ruins the machine. Only wipe the external plates with a damp cloth. If plates are removable and labelled dishwasher-safe, those plates can be washed, but not the body.
What should you not use to clean a sandwich maker?
Avoid knives, metal scourers and abrasive pads, which scratch and ruin the non-stick plates and make future sticking worse, and avoid harsh chemical cleaners or oven sprays, whose residue can taint food and damage the coating. Stick to a damp cloth, a little mild soap on a stubborn greasy patch, and a soft sponge or wooden tool.
Ready to compare actual models?
Our buying guide puts five products side by side on the numbers their makers publish.