Lush Food & Drink

Buying Guide ·Knives

Best Whetstones for Sharpening Kitchen Knives by Hand

The deciding specification is grit, but the figure that separates a professional stone from a kit stone is the length of the blank, and three of the eight listings never publish it.

By the Lush Editorial Team·Researched & Compared

  • Researched & ComparedSpecs pulled from the manufacturer listing
  • Like-for-LikeSame measures across every model
  • No Paid PlacementsNobody pays to appear here

I compared grits, stated stone dimensions against published fields, abrasives, soak times, holders and what else is in the box across eight whetstone listings, using only the makers' own text.

Our shortlist

Five products, one set of published numbers.
  1. Shapton K0703 Blade Blade
    Best single stone for dull knives

    Shapton K0703 Blade Blade

    A 2000 grit medium stone at 8.3 by 2.8 by 0.6 inches, given also as 210 by 70 millimeters, which the maker says works as both a medium and a finishing stone, and the only listing here whose published fields match its own stated size.

    • Shapton
    • 8.3"(210 mm) x 2.8"(70 mm) x H. 0.6"(15 mm)
    • 1.1 lb
  2. Naniwa Chosera Whetstone SS-400 Grit 400
    Best for repairing a chipped edge

    Naniwa Chosera Whetstone SS-400 Grit 400

    A 400 grit repair stone at 210 by 70 by 25 millimeters arriving on a sturdy holder, with a Toishi at 65 by 50 by 30 millimeters for raising a slurry, stated as professional quality from Japan.

    • Sanelli Ambrogio
    • 2.2 lb
  3. King Pro Standard Whetstone
    Best first stone with plenty to wear through

    King Pro Standard Whetstone

    An 800 grit medium coarse stone stated at eight and one eighth inches long, two and three quarters wide and one and one quarter thick, requiring submersion before use and shipping with honing instructions and diagrams.

    • KING
    • Weight not listed
  4. 7 Piece Knife Sharpening Stone Set
    Best for starting from nothing

    7 Piece Knife Sharpening Stone Set

    Two dual sided stones covering 400, 1000, 3000 and 8000 grit, with a cowhide leather strop, a 150 grit flattening stone, a 320 grit finishing stone, an angle guide for 10 to 30 degrees and a bamboo base.

    • STARLEX
    • 7 Piece Kit Blue/White
    • 5.36 lb
  5. Knife Sharpening Stone Set
    Best for the everyday working pair

    Knife Sharpening Stone Set

    A 1000 and 6000 grit dual sided stone in white aluminum oxide at 7.09 by 2.36 by 1.18 inches, with a solid bamboo non slip base, a fixed angle guide and a stropping cloth, needing a 15 minute soak.

    • LORVEXQANI
    • 7.09 x 2.36 x1.18 inch
    • 1.11 lb

Side by side

Blank means the maker does not publish it.
ModelBrandSize (capacity)WeightBest for
Shapton K0703 Blade Blade Shapton 8.3"(210 mm) x 2.8"(70 mm) x H. 0.6"(15 mm) 1.1 lb Best single stone for dull knives
Naniwa Chosera Whetstone SS-400 Grit 400 Sanelli Ambrogio not published 2.2 lb Best for repairing a chipped edge
King Pro Standard Whetstone KING not published not published Best first stone with plenty to wear through
7 Piece Knife Sharpening Stone Set STARLEX 7 Piece Kit Blue/White 5.36 lb Best for starting from nothing
Knife Sharpening Stone Set LORVEXQANI 7.09 x 2.36 x1.18 inch 1.11 lb Best for the everyday working pair

Each pick in detail

What the listing says for it, and against it.
1 Best single stone for dull knives

Shapton K0703 Blade Blade

A 2000 grit medium stone at 8.3 by 2.8 by 0.6 inches, given also as 210 by 70 millimeters, which the maker says works as both a medium and a finishing stone, and the only listing here whose published fields match its own stated size.

  • For it
  • The only listing whose published dimension fields match its own stated size
  • Publishes its size in both inches and millimeters, 8.3 by 2.8 by 0.6 and 210 by 70
  • At 2000 grit it works as both a medium and a finishing stone, which the maker states
  • A 210 millimeter length takes almost a whole chef knife edge in one pass
  • Against it
  • Only four feature bullets, the fewest in this pool
  • Publishes no abrasive, no binder and no country of manufacture
  • Says nothing about water: no soak time, and no statement of splash and go
2 Best for repairing a chipped edge

Naniwa Chosera Whetstone SS-400 Grit 400

A 400 grit repair stone at 210 by 70 by 25 millimeters arriving on a sturdy holder, with a Toishi at 65 by 50 by 30 millimeters for raising a slurry, stated as professional quality from Japan.

  • For it
  • A 400 grit repair stone, the coarsest single grit here, for chips and bevel resets
  • Publishes a full metric size, 210 by 70 by 25 millimeters
  • The only single stone arriving on a sturdy holder
  • Includes a Toishi at 65 by 50 by 30 millimeters for raising a slurry
  • Against it
  • Its dimension fields of 1.97 by 3.54 by 11.81 inches match none of its stated figures
  • Titled as a Naniwa Chosera while its brand field reads Sanelli Ambrogio
  • Publishes no soak time and no abrasive
3 Best first stone with plenty to wear through

King Pro Standard Whetstone

An 800 grit medium coarse stone stated at eight and one eighth inches long, two and three quarters wide and one and one quarter thick, requiring submersion before use and shipping with honing instructions and diagrams.

  • For it
  • States its size in a bullet: eight and one eighth long, two and three quarters wide, one and one quarter thick
  • The thickest single stone here, so there is a great deal to wear through
  • States that it requires submersion in water before use
  • Includes honing instructions and diagrams, which no other single stone does
  • Against it
  • Its dimension fields of 2.8 by 8.9 by 1.4 inches disagree with its own stated size
  • Publishes no weight at all
  • States submersion without a soak time
4 Best for starting from nothing

7 Piece Knife Sharpening Stone Set

Two dual sided stones covering 400, 1000, 3000 and 8000 grit, with a cowhide leather strop, a 150 grit flattening stone, a 320 grit finishing stone, an angle guide for 10 to 30 degrees and a bamboo base.

  • For it
  • Four grits across two stones, 400 and 1000 then 3000 and 8000
  • The only pick with flattening stones, at 150 grit and 320 grit
  • Includes a genuine cowhide leather strop and an angle guide for 10 to 30 degrees
  • Names the abrasive as corundum, given as aluminum oxide
  • Against it
  • Publishes no dimension for either stone, so blade coverage cannot be judged
  • Its dimension fields were dropped as package size
  • Its 5.36 pound weight covers the whole kit, so no stone can be weighed

Who should skip this: Skip this if weight matters: at 5.36 lb it is the heaviest of the five published weights.

5 Best for the everyday working pair

Knife Sharpening Stone Set

A 1000 and 6000 grit dual sided stone in white aluminum oxide at 7.09 by 2.36 by 1.18 inches, with a solid bamboo non slip base, a fixed angle guide and a stropping cloth, needing a 15 minute soak.

  • For it
  • Publishes its size, 7.09 by 2.36 by 1.18 inches, and its fields match exactly
  • The working pair most home cooks need, 1000 to reshape and 6000 to polish
  • Names the abrasive as white aluminum oxide
  • States a 15 minute soak and says to keep the stone wet throughout
  • Against it
  • At 7.09 inches it is shorter than the three professional stones here
  • Two grits on one 1.18 inch blank means each abrasive layer is a fraction of that
  • No flattening stone included, and a dual sided stone will dish on both faces

Our verdict

Shapton is the single stone to buy: 2000 grit at 8.3 by 2.8 by 0.6 inches, which its maker describes as usable for both medium and finishing work, and the only listing here whose fields match its stated size. The Naniwa Chosera at 400 grit is the repair stone, 210 by 70 by 25 millimeters on a holder with a Toishi. King is 800 grit and thick. STARLEX covers four grits with a strop and flattening stones.

“Grit is the number everyone quotes. Size is what matters.”

Lush Editorial Team

What separates these five

Two stones hit 210 millimeters Shapton and the Naniwa both publish 210 by 70 mm. The kit stone is 7.09 inches and one kit publishes nothing.
Grit is a sequence 400 repairs, 800 works, 2000 finishes, 6000 and 8000 polish. A single grit is a single step of a job.
Thickness is lifespan 0.6 inches, 25 millimeters, and one and one quarter inches. Every flattening takes some of it away.
Soak times differ Fifteen minutes, twenty minutes, submersion with no time, and two listings that never mention water.
Only one listing agrees with itself Shapton's published fields match its stated size. Two listings publish fields that match nothing they say.

How we chose

Priorities, not a computed score. The inputs are published specifications, so we rank by what matters most and say how much.

  1. 30% Grit, and whether it covers the jobA single 400 grit stone repairs and cannot finish. A single 2000 can finish and cannot repair. The grit or pair you buy decides whether you are done or shopping again.
  2. 25% The published size of the stoneA blade longer than the stone has to be sharpened in sections, and every section change risks the angle. 210 millimeters is the professional length for a reason, and one listing here publishes nothing.
  3. 20% Thickness and how long it will lastEvery sharpening and every flattening removes stone. A thick single grit blank outlives a thin dual sided one, because a dual sided stone splits its thickness between two abrasives.
  4. 15% Water instructionsA soaking stone used dry glazes and stops cutting. Three listings publish a soak time or a submersion instruction and two say nothing about water at all.
  5. 10% What else is in the boxA non slip base, an angle guide and a flattening stone are the difference between sharpening and guessing. One kit includes all three plus a strop; the single stones include almost nothing.

How the Five Compare on the Numbers

Three listings were left out. SHAN ZU publishes a 1000 and 5000 grit pair and no dimension for either stone. CarsonChase publishes fifteen pieces across seven grits and no dimension for any of them. vuwo publishes exactly the same blank as LORVEXQANI, 7.09 by 2.36 by 1.18 inches with the axes entered in a different order, at a coarser 400 and 1000 grit pair, and its size field reads normal size.

What matters after grit is the size of the stone, because a blade longer than the stone has to be sharpened in sections and every section change is a chance to lose the angle. Shapton and the Naniwa both publish 210 by 70 millimeters, the professional standard. King publishes eight and one eighth inches long. The kit stones are 7.09 inches, and one publishes nothing.

Specification Shapton K0703 Naniwa Chosera 400 King Pro medium STARLEX 7 piece kit LORVEXQANI dual
Grits 2000, single 400, single 800, single 400 and 1000, plus 3000 and 8000 1000 and 6000, dual sided
Stones in the set One One, plus a Toishi One Two dual sided, plus two flattening stones One
Stone size stated 8.3 x 2.8 x 0.6 in, also as 210 x 70 mm 210 x 70 x 25 mm Eight and one eighth by two and three quarters by one and one quarter inches not published 7.09 x 2.36 x 1.18 in
Do the fields match that size Yes, to a hundredth of an inch No, fields give 1.97 x 3.54 x 11.81 in No, fields give 2.8 x 8.9 x 1.4 in Fields dropped as package size Yes, exactly
Abrasive named not published not published not published Corundum, given as aluminum oxide White aluminum oxide
Water or oil not published not published Requires submersion before use Water, soak 20 minutes Water only, soak 15 minutes
Base or holder included not published A sturdy holder not published Non slip bamboo with rubber grips Solid bamboo, non slip
Angle guide included not published not published not published Yes, for 10 to 30 degrees Yes, a fixed angle guide
Strop included not published not published not published Genuine cowhide leather A stropping cloth
Flattening stone included not published not published not published Yes, 150 grit plus a 320 grit not published
Instructions included not published not published Honing instructions and diagrams Yes not published
Origin stated not published Professional quality from Japan not published not published not published
Published weight 1.1 lb 2.2 lb not published 5.36 lb for the kit 1.11 lb
Feature bullets published Four Five Five Six Five

What nobody publishes is the figure a sharpener would actually ask for: the binder. A 1000 grit stone in a soft binder cuts fast and dishes fast; the same grit in a hard resin or ceramic binder cuts slower and stays flat for years. Not one of these eight listings says which it is, and grit alone cannot tell you whether a stone will last a season or a decade.

Grit Is a Sequence, Not a Number

What Each Grit Is Actually For

A 400 grit stone removes metal. The Naniwa Chosera at 400 is a repair stone: it resets a bevel, takes out a chip, and leaves a coarse edge you must then refine. An 800 grit stone, which is what the King Pro is, sits in the middle and can do both jobs badly or one job well, which is why it is sold as medium coarse for dull and damaged blades.

A 2000 grit stone, which is the Shapton, is where a kitchen knife gets usable. Shapton describes it as a medium whetstone that can be used as both medium and finishing, which is the honest description of a single stone solution: you can live on 2000 alone if your knives are merely dull rather than damaged. It is the smallest single stone commitment here.

Why the Kits Sell Pairs

STARLEX sells four grits on two stones, 400 and 1000 on one, 3000 and 8000 on the other, which covers repair through polish. LORVEXQANI sells 1000 and 6000 on one stone, which is the working pair most home cooks actually need: 1000 to reshape an edge and 6000 to polish and deburr. Neither approach is wrong and they answer different starting points.

The catch with dual sided stones is thickness. LORVEXQANI publishes 1.18 inches total for both sides, so each abrasive layer is a fraction of that, and every sharpening session and every flattening takes some away. The Naniwa publishes 25 millimeters of single grit and the King publishes one and one quarter inches, which is a stone you will wear out rather than use up.

Stone Size and Why 210 Millimeters Is a Standard

Two Listings Hit the Professional Size

Shapton publishes 8.3 by 2.8 by 0.6 inches and gives the same figures in millimeters, 210 by 70. The Naniwa publishes 210 by 70 by 25 millimeters. A 210 millimeter stone takes almost the whole edge of a standard chef knife in one pass, which is why Japanese makers settled on it, and 70 millimeters of width lets you angle the blade across the stone rather than straight along it.

The King is close, at eight and one eighth inches long and two and three quarters wide, which is the same footprint in inches. What separates the three is thickness: Shapton publishes 0.6 inches, the Naniwa publishes 25 millimeters and the King publishes one and one quarter inches. A thin stone is a stone with fewer flattenings in it.

Where the Fields Cannot Be Trusted

Shapton is the only listing in this pool whose published dimension fields match its own stated size, 2.76 by 8.27 by 0.59 inches against a stated 8.3 by 2.8 by 0.6. LORVEXQANI’s fields match its size field exactly too. Those two can be read straight, which is unusual enough to be worth saying.

The Naniwa’s fields give 1.97 by 3.54 by 11.81 inches, and none of those three figures corresponds to 210 by 70 by 25 millimeters. The King’s fields give 2.8 by 8.9 by 1.4 inches against a stated eight and one eighth by two and three quarters by one and one quarter. This page uses the makers’ own sentences in both cases and discards the fields.

Water, Bases, and What Else Is in the Box

Soak Times Differ and Two Listings Skip Them

A soaking stone that goes to the blade dry will glaze and stop cutting. LORVEXQANI states 15 minutes and says to keep the stone wet throughout. STARLEX states 20 minutes and adds that the flattening stones need soaking too. The King states only that it requires submersion in water before use, with no time. Shapton and the Naniwa publish nothing about water at all.

That silence is not necessarily a fault. Some professional stones are splash and go rather than soakers, and the difference matters enough that the maker should say which. Neither Shapton nor the Naniwa does, which means the buyer of either has to find out from somewhere other than the listing, and getting it wrong ruins the first session.

Holders, Guides, and Strops

The two kits are kits for a reason: a stone that slides is a stone that cuts you. STARLEX ships a non slip bamboo base with rubber grips, an angle guide for 10 to 30 degrees, a genuine cowhide leather strop, a 150 grit flattening stone and a 320 grit finishing stone, plus instructions. LORVEXQANI ships a bamboo base, a fixed angle guide and a stropping cloth.

Among the single stones, the Naniwa is the only one that arrives on a sturdy holder, and it includes a Toishi at 65 by 50 by 30 millimeters, which is the small stone used to raise a slurry and clean the surface. Shapton and the King ship the stone alone, and the King at least includes honing instructions and diagrams.

Which One Fits Your Kitchen

One stone and nothing else. Shapton is a 2000 grit medium stone at 8.3 by 2.8 by 0.6 inches, described by its maker as usable for both medium and finishing work. At 210 by 70 millimeters it takes almost a whole chef knife edge in one pass, and it is the only listing here whose fields match its stated size.

Repairing a chipped or ruined edge. The Naniwa Chosera at 400 grit is a repair stone, 210 by 70 by 25 millimeters on a sturdy holder, shipping a Toishi at 65 by 50 by 30 millimeters for raising a slurry, and stated as professional quality from Japan. Its dimension fields do not match its stated size.

A first stone for dull kitchen knives. The King Pro is 800 grit, medium coarse, eight and one eighth inches long by two and three quarters wide by one and one quarter thick, so there is a lot of stone to wear through. It requires submersion before use and includes honing instructions and diagrams.

Everything needed to start from scratch. STARLEX is 400 and 1000 on one stone and 3000 and 8000 on another, with a cowhide strop, a 150 grit flattening stone, a 320 grit finishing stone, an angle guide for 10 to 30 degrees, a bamboo base and instructions, at 5.36 pounds. It publishes no stone dimension.

One stone that covers the everyday pair. LORVEXQANI is 1000 and 6000 on one dual sided stone at 7.09 by 2.36 by 1.18 inches in white aluminum oxide, with a bamboo base, a fixed angle guide and a stropping cloth, needing a 15 minute soak. Its published fields match its stated size exactly.

What We Could Not Verify

These are the figures that decide how a stone behaves, and almost none of them is published.

  • No listing names the binder, so whether a stone cuts fast and dishes fast or cuts slowly and stays flat is unknown.
  • STARLEX publishes no dimension for either of its two stones, and its fields were dropped as package size.
  • Shapton and the Naniwa publish no soak time and no statement of whether they are soakers or splash and go.
  • Shapton and the Naniwa name no abrasive, and neither does the King.
  • The Naniwa’s dimension fields of 1.97 by 3.54 by 11.81 inches do not correspond to its stated 210 by 70 by 25 millimeters.
  • The Naniwa is titled as a Naniwa Chosera while its brand field reads Sanelli Ambrogio, and nothing in the listing reconciles the two.

Frequently asked questions

What grit whetstone should I start with?+

For kitchen knives that are dull rather than damaged, 800 to 2000 is the useful band, which is where the King Pro at 800 and the Shapton at 2000 sit. A 400 grit stone like the Naniwa Chosera is a repair tool: it resets a bevel or removes a chip and leaves an edge you still have to refine. If you only ever buy one stone, a single medium stone that can also finish is the practical choice.

Why does stone length matter so much?+

Because a chef knife edge is longer than most stones, and anything longer than the stone has to be sharpened in sections. Every time you reposition the blade you risk changing the angle, and the angle is the whole point. Shapton and the Naniwa both publish 210 millimeters, which covers almost a whole edge in one pass. The kit stone here is 7.09 inches, which covers less.

Is a dual sided stone as good as two separate ones?+

It is more convenient and it lasts less time. LORVEXQANI publishes 1.18 inches of total thickness for both its 1000 and 6000 surfaces, so each abrasive layer is a fraction of that, and every flattening takes some of it away. A single grit blank like the King's one and one quarter inches, or the Naniwa's 25 millimeters, is all one abrasive and outlasts a split one.

How long should I soak a whetstone?+

It depends on the stone and three of these five tell you. LORVEXQANI states 15 minutes and says to keep the stone wet throughout. STARLEX states 20 minutes and notes that the flattening stones need soaking with the rest. King states only that submersion is required, with no time. Shapton and the Naniwa publish nothing about water, which matters because some professional stones are splash and go rather than soakers.

Do I need a flattening stone?+

Eventually, yes, because every stone wears hollow in the middle where you work it, and a hollow stone cannot put a straight bevel on a blade. STARLEX is the only pick here that includes one, actually two: a 150 grit stone to level the surface and a 320 grit stone to remove the scratches and filings that leaves. None of the other four includes one, and the dual sided stone will dish on both faces.

Why is a stone titled Naniwa sold under another brand name?+

The listing's title reads Naniwa Chosera Whetstone SS-400 while its brand field reads Sanelli Ambrogio, which is an Italian knife maker. Nothing in the five bullets reconciles the two, so it is either a reseller listing carrying its own brand field or a mislabeled entry. The published specifications are consistent with a Chosera: 210 by 70 by 25 millimeters, a 400 grit surface, a holder, and a Toishi.

Specifications come from the manufacturers' own published listings. Lush Food & Drink may earn a commission if you buy through a link on this page, at no extra cost to you. How we research.