How the Five Compare on the Numbers
Cleaning instructions are the first column to read here. The Normcore 53.3mm, Normcore 58.5mm and HOUTRIDA each state a water rinse, a steam wand blast and Cafiza. The DRMBIGA states a water rinse and air dry. The XIWENQUKU 53.3mm states a faucet rinse and wipe dry. Not one of these five uses the word dishwasher, so every pick here is hand wash only.
The figures that decide the rest are thickness, mesh and weight. Four picks state a 1.7mm thickness and the DRMBIGA states 0.8mm edges with a 1.2mm aperture instead. Four state a 150 micron mesh and the DRMBIGA states a 0.15mm layer, which is the same figure in millimeters. Only HOUTRIDA and DRMBIGA publish a weight, at 0.07 lb and 0.44 lb.
The table cannot tell you how a screen performs in a basket, because not one of these five publishes a flow rate, a pressure figure or a cleaning time. It also cannot repair the Normcore 53.3mm dimension fields, which read 53.3 by 53.3 by 1.7 in inch columns and are plainly the millimeter diameter and thickness from the listing’s own title.
What Each Maker States About Cleaning
Rinse, Cafiza and steam wand
The Normcore 53.3mm and Normcore 58.5mm each state a quick rinse to clean, with Cafiza or a steam wand blast if the product is stained. That is three stated options. The HOUTRIDA states a rinse under running water, or a steam wand or Cafiza for deeper cleaning. These three picks give a reader the most stated ways to clean a screen.
What separates them is what each one publishes beyond the routine. The Normcore 58.5mm publishes dimension fields of 2.3 by 2.3 by 0.07 inches, which are credible for a 58.5mm disc 1.7mm thick. HOUTRIDA publishes 0.07 lb for three screens and a package of 2.1 by 2.1 by 0.2 inches. The Normcore 53.3mm publishes no weight at all.
Rinse only routines
The DRMBIGA states a water rinse and air dry after use. The XIWENQUKU 53.3mm states a faucet rinse, then a wipe dry. Neither states a Cafiza soak or a steam wand blast. For a reader who wants a rinse only routine, these two are the picks whose published instructions stop at water. The DRMBIGA adds that its 0.15mm mesh blocks grounds from the brew head.
DRMBIGA publishes 0.44 lb for its two pack, the heaviest published weight here, and a package of 3.94 by 3.94 by 1.97 inches. The XIWENQUKU 53.3mm publishes no weight and no dimension of any kind. Both state a 316 stainless steel build. DRMBIGA states 0.8mm edges and a 1.2mm aperture, and XIWENQUKU states a 1.7mm thickness and a 150 micron mesh.
Materials, Mesh and Thickness
What the makers state about steel
All five picks state 316 stainless steel. The DRMBIGA states food grade 316 stainless steel with reinforced 0.8mm edges. The HOUTRIDA states laser cut food grade 316 stainless steel that will not rust or clog, and claims more corrosion resistance than 304 stainless steel. The Normcore picks state food grade, non toxic stainless steel. The XIWENQUKU 53.3mm states safe and food grade 316 stainless steel mesh.
Not one of these five publishes a steel grade test, a corrosion figure or a hardness number. The statements are claims about the material, not measurements. A reader comparing picks can note that all five name the same steel family, and that the DRMBIGA and HOUTRIDA add a claim about edge strength or corrosion resistance that the other three do not make at all.
Mesh and thickness figures
Four picks state a 150 micron mesh: the Normcore 53.3mm, Normcore 58.5mm, HOUTRIDA and XIWENQUKU 53.3mm. The DRMBIGA states a 0.15mm mesh layer, which is the same figure written in millimeters, plus a 1.2mm aperture above it. Four picks state a 1.7mm thickness: the two Normcore screens, the HOUTRIDA and the XIWENQUKU. The DRMBIGA states 0.8mm edges instead.
These figures describe the screen, not its performance. Not one of these five publishes a flow rate or a pressure drop. A reader who wants a stated 1.7mm thickness has four picks to compare, and a reader who wants a stated 150 micron mesh has the same four. The DRMBIGA is the one pick that gives its mesh and its edges in millimeters and no overall thickness.
The Figures That Are Not the Screen
One Listing’s Inch Fields Are Millimeters
The Normcore 53.3mm publishes dimension fields of 53.3 by 53.3 by 1.7 in inch columns. A puck screen 53.3 inches across does not exist, and the same listing’s title gives 53.3mm and a 1.7mm thickness, so the fields are the millimeter figures in the wrong unit. This page reads them as millimeters and says so rather than printing them as inches.
Its sibling, the Normcore 58.5mm, gets it right. That listing publishes 2.3 by 2.3 by 0.07 inches, which is a 58.5mm disc with a 1.7mm thickness converted properly, and the two listings are otherwise word for word the same. Same maker, same bullets, two different conventions in the dimension fields, and nothing on either listing to flag it.
Two Package Figures and What They Cover
HOUTRIDA and DRMBIGA are multi packs, so their published figures describe a carton rather than a screen. HOUTRIDA publishes 2.1 by 2.1 by 0.2 inches for a box of three. DRMBIGA publishes 3.94 by 3.94 by 1.97 inches for a box of two, which is a lot of air around two steel discs. Neither figure tells you anything about the screen itself.
The weights follow the same logic. HOUTRIDA’s 0.07 lb covers three screens and DRMBIGA’s 0.44 lb covers two, so neither is a per screen figure and the two cannot be set against each other. The XIWENQUKU two pack publishes no weight at all, and neither Normcore publishes one, which leaves no clean weight comparison anywhere on this page.
Which One Fits Your Kitchen
You want a Cafiza and steam wand routine. The Normcore 53.3mm, Normcore 58.5mm and HOUTRIDA each state all three cleaning options. Pick by basket: 53.3mm and 53.5mm are for 54mm baskets, and 58.5mm is for 58mm.
You want a rinse only routine. The DRMBIGA states a water rinse and air dry. The XIWENQUKU 53.3mm states a faucet rinse and wipe dry. Neither states a Cafiza soak or a steam wand blast, and neither publishes a dimension for the screen.
You want three screens in one order. HOUTRIDA publishes 0.07 lb for three 53.5mm screens, 1.7mm thick with a 150 micron mesh, and states that they dry fast and take up minimal space in a drawer or on a coffee station.
You pull shots on a 58mm basket. The Normcore 58.5mm is the only pick here published for 58mm baskets. The other four are published at 53.3mm, with HOUTRIDA also saying 53.5mm in its first bullet rather than its title.
You want a dual layer screen with a spare. DRMBIGA publishes 0.44 lb for two dual layer screens, 316 stainless with 0.8mm edges and a 0.15mm mesh, and warns against brew heads with protruding screws.
What We Could Not Verify
Several figures a reader would want are absent from these five listings. These are the gaps, and none of them was filled in.
- A dishwasher statement from any of these five, so every pick is hand wash only on the published text.
- A width, depth or height for the DRMBIGA screen itself, as opposed to its carton.
- Any dimension at all for the XIWENQUKU 53.3mm, which publishes no figure beyond its size field.
- A per screen weight from HOUTRIDA or DRMBIGA, whose published figures cover three screens and two.
- A drying time in minutes or hours from any of the five.
- A flow rate, a pressure figure or a cleaning time from any of the five.