Lush Food & Drink

Explainer

How to clean a cutting board with lemon and baking soda?

Scrub the board with a paste of baking soda and lemon juice, let it sit a few minutes, then rinse and dry it completely.

By the Lush Editorial Team·Researched & Compared

To clean a cutting board with lemon and baking soda, mix about 2 tablespoons of baking soda with enough lemon juice to form a thick paste, spread it over the board, scrub with a soft brush or cloth, let it sit for 5 to 10 minutes, then rinse and dry the board completely. The paste lifts residue from the surface, and the lemon juice leaves a fresh scent, but neither ingredient sanitizes the board, so wash it with soap and water first and follow the maker’s care instructions for the specific board.

Why lemon and baking soda work as a scrub

Baking soda is a mild abrasive that lifts dried-on food and residue from the board’s surface without scratching most materials. Lemon juice adds acidity and a fresh scent, and when the two meet they fizz briefly, which helps loosen debris in shallow cuts and grooves. The mixture is a cleaner, not a disinfectant: it does not kill bacteria the way soap and water or a diluted bleach solution can.

For that reason, treat the lemon and baking soda step as a follow-up to a normal wash, not a replacement. Scrub the board with warm soapy water first, rinse it, then apply the paste to tackle stains and odors. On wood and bamboo, keep the paste on the surface and avoid soaking, because prolonged moisture can raise the grain or lead to cracking. The Best Wooden Cutting Boards for Juice Grooves and Storage guide lists boards whose makers describe hand washing and oiling routines, and those routines matter more than any paste.

How to apply the paste to a cutting board

Start with a board that has been washed and rinsed. Sprinkle 2 to 3 tablespoons of baking soda across the surface, then squeeze or spoon lemon juice over it until it forms a paste. Spread the paste with a soft brush, a non-scratch sponge, or a cloth, working it into juice grooves and any textured areas. Let it sit for 5 to 10 minutes, then rinse with warm water and dry immediately with a towel.

For boards with deep grooves, use a small brush to reach into the channel. The Empune Extra Large Cutting Boards set lists a juice groove on all sides, and the Sumzzz Titanium Cutting Board lists a built-in juice groove and a garlic grinding area, both of which can trap residue. A brush reaches those spots better than a flat sponge. Avoid soaking any board in the paste or in water, and do not leave the paste on wood or bamboo for long periods.

Match the method to the board material

Plastic boards tolerate the paste well. The THETCHRY Plastic Cutting Board Set of 3 is described as dishwasher safe, and the GORILLA GRIP BPA-Free Reversible Kitchen Cutting Board set is also described as dishwasher safe, so the lemon and baking soda scrub is an optional step for stains and odors between dishwasher cycles. The OXO Good Grips Plastic Utility Cutting Board lists double-sided, non-porous surfaces that resist odors, which means the paste is mostly useful for visible residue.

Wood and bamboo need more care. The Bevel & Bond Maple End-Grain Cutting Board is described as hand wash only, never dishwasher and never soak, and the Realgulf 24×18 Teak Butcher Block lists hand wash only with regular mineral oil conditioning. For these boards, keep the paste brief, rinse quickly, and re-oil when the surface looks dry. Titanium boards, such as the Pexucalm Double-Sided Titanium Cutting Board, are described as easy to rinse, so a short paste treatment is enough.

What the makers publish about cleaning

Several makers describe cleaning methods in their product information. The THETCHRY set is described as dishwasher safe or hand washable with soap. The GORILLA GRIP set is described as dishwasher safe. The Empune set is described as rinseable with warm water or dishwasher safe. The Sumzzz titanium board is described as rinseable on both sides with water. The Pexucalm board is described as easy to clean with a dishcloth. None of these makers publish a specific lemon and baking soda procedure, so the paste method is a general cleaning technique, not a maker instruction.

For wood boards, the Bevel & Bond listing states hand wash with warm soapy water and towel dry, and the Realgulf listing states hand wash only. The Best Meat Cutting Boards for Carving Roasts and Raw Prep guide includes these boards, and their care notes are the best guide to how much moisture they can take. If a maker says never soak, keep the paste on the surface and rinse fast.

Rinse, dry, and store the board

Rinse the paste away with warm water, then dry the board completely with a clean towel. Stand it on edge or hang it so air can reach both faces. The Sumzzz board lists a built-in hanging hole, and the Freshware Bamboo Cutting Board Set lists a hanging hole, both of which help with drying. Never stack a damp board flat against a counter or another board.

Store boards where air can circulate. The Best Cutting Board Organizers for Thick and Thin Boards guide lists racks with slots for upright storage, such as the KORRTFID Cutting Board Storage Rack with four 1.0 inch wide slots and the LAEMYFYRE Cutting Board Holder Stand with 1.0 and 1.2 inch wide slots. Upright storage helps a board dry after any cleaning method, including the lemon and baking soda scrub.

When lemon and baking soda are not enough

If the board still smells or shows stains after the paste, wash it with warm soapy water and consider a diluted bleach solution for plastic boards, following the maker’s instructions. For wood boards, a light sanding and re-oiling may be needed if the surface is rough. The Best Cutting Boards for Plastic and Titanium Sets guide lists plastic and titanium boards whose makers describe non-porous surfaces, which are less likely to hold odors in the first place.

Replace a board that has deep cuts, cracks, or a persistent odor that cleaning does not remove. The lemon and baking soda paste is a useful routine for light stains and freshness, but it is not a repair or a sanitizer. Keep the board dry, wash it after raw meat, and follow the maker’s care notes for the material.

Common questions

Can I use lemon and baking soda on a wooden cutting board?

Yes, but keep it brief. Mix a thick paste, spread it on the surface, let it sit for 5 minutes at most, then rinse quickly and dry the board completely. Wood and bamboo makers such as Bevel & Bond and Realgulf specify hand wash only and never soak, so avoid leaving the paste on for long periods and re-oil the board when it looks dry.

Does lemon and baking soda sanitize a cutting board?

No. The mixture is a mild abrasive cleaner that lifts residue and freshens the surface, but it does not kill bacteria. Wash the board with warm soapy water after raw meat, and use a diluted bleach solution for plastic boards if you need to sanitize, following the maker's instructions. For wood, soap and water plus thorough drying is the standard care.

How often should I clean a cutting board with lemon and baking soda?

Use the paste when the board looks stained, smells stale, or has visible residue in the grooves. For daily cleaning, warm soapy water and a rinse are enough. Plastic boards that are dishwasher safe, such as the THETCHRY and GORILLA GRIP sets, can go in the dishwasher, and the paste is an optional extra for odors between cycles.

Can I use the paste on a titanium cutting board?

Yes. Titanium boards such as the Sumzzz and Pexucalm models are described as easy to rinse and non-porous, so a short lemon and baking soda scrub is fine. Rinse well and dry the board, and use a soft cloth or brush rather than anything abrasive that could dull the matte finish.

What should I do if the smell stays after cleaning?

Wash the board again with warm soapy water, then try a fresh paste and let it sit for 10 minutes before rinsing and drying. If the odor persists, the board may have deep cuts that hold residue. Plastic boards with non-porous surfaces, such as the OXO Good Grips Utility Cutting Board, resist odors, and a board with deep cracks should be replaced.

Ready to compare actual models?

Our buying guides put five products side by side on the numbers their makers publish.

More questions about cutting boards