Explainer
What cutting board should I use for raw meat?
Use a board the maker designates for raw meat, keep it separate from produce boards, and wash it after every session.
By the Lush Editorial Team·Researched & Compared
Use a cutting board that the maker designates for raw meat, and keep that board off produce duty. Among the picks in our Best Meat Cutting Boards for Carving Roasts and Raw Prep and Best Cutting Boards for Plastic and Titanium Sets guides, the boards with a stated raw meat side are the Pexucalm double-sided titanium board and the Sumzzz titanium board, and the plastic sets separate meat from vegetables by size.
Boards with a stated raw meat side
The Pexucalm Double-Sided Titanium Cutting Board is the most explicit of the picks. The maker states that the titanium side is for raw meat and seafood, and that you flip to the wheat straw PP side for vegetables and fruits. The board measures 15.4 by 10.4 inches and stands 0.5 inches tall. The maker does not publish a weight for it.
The Sumzzz Titanium Cutting Board follows the same logic without naming raw meat as directly. The maker states that one side is suitable for meat and the other for fruits and vegetables. It measures 16 by 11 inches, with a published height of 0.94 inches. The maker describes the titanium surface as non-porous, which it says helps reduce absorption of liquids, odors and stains.
Both boards are built around the same idea: a metal face for the raw protein, a softer face for everything else. The Pexucalm maker adds that the wheat straw side is softer and protects knife edges. Neither maker publishes a weight, so if lifting the board matters to you, that figure is not available from them.
Plastic sets that split meat from produce by size
The THETCHRY Plastic Cutting Board Set of 3 assigns jobs by size. The maker states that the large 15 by 10 inch board is for meat and fish, the medium 11 by 8 inch board for vegetables and fruit, and the small 9 by 6 inch board for onions and peppers. The set weighs 1.4 pounds according to the listing weight, and the maker states 2.3 pounds in its own text.
The GORILLA GRIP BPA-Free Reversible Kitchen Cutting Board set of 3 publishes its sizes in the maker’s own copy: largest 16 by 11.2 inches, medium 13.8 by 9.6 inches, small 11.8 by 8 inches, each 0.37 inches thick, combined 4.25 pounds. The maker states the boards have a nonporous surface and deep grooves to catch juices, and that the material helps prevent liquid and odor absorption.
The Empune Extra Large Cutting Boards set of 3 publishes three sizes: extra large 17.0 by 11.8 by 0.4 inches, large 14.0 by 9.5 by 0.35 inches, and medium 11.4 by 7.8 by 0.35 inches. The maker states each size is designed for a type of food and can be cut separately, and that all sides carry a juice groove. The listing weight is 4.53 pounds.
Wood boards for breaking down and carving
The Bevel & Bond Maple End-Grain Cutting Board measures 17 by 13 inches and stands 1.75 inches thick, at 10 pounds. The maker states it is built for everything from fine vegetable prep to breaking down large roasts and whole chickens, and that the deep juice groove captures runoff from large cuts. The maker also states the board is hand wash only and should never go in the dishwasher or be soaked.
The FANICHI End Grain Cutting Board measures 17 by 13 inches at 1.5 inches thick, with a listed weight of 6 pounds. The maker states the front side has a carved juice groove to catch liquids from meat, fruit or vegetables, and the reverse side has built-in compartments for holding diced vegetables and herbs. The maker does not state a raw meat designation beyond the juice groove description.
The Realgulf 24 by 18 Teak Butcher Block measures 24 by 18 inches at 1 inch thick, at 9 pounds. The maker states the double flat sides create separate zones for meat, produce and charcuterie, and that grip pads are supplied separately and must be applied by the buyer. The Greener Chef bamboo carving board also measures 24 by 18 inches, at 0.75 inches thick and 6.8 pounds, with a juice groove and pour spout for drippings.
A small utility board for quick raw prep
The OXO Good Grips Plastic Utility Cutting Board measures 14.8 by 10.4 inches and stands 0.5 inches tall, at 1.53 pounds. The maker states the double-sided surfaces are non-porous and resist odors, and that integrated drip-catcher corners and a pour spout minimize messes. The maker also states non-slip feet keep the board in place while chopping and slicing.
That combination suits a single chicken breast or a small trim job better than a large roast. The maker does not state a raw meat designation for this board, so the separation has to come from your own kitchen routine: if it handles raw protein, it does not also handle salad. The drip catcher helps with the juices that raw meat leaves behind.
How to keep raw meat off your other food
Pick one board as the raw meat board and do not use it for anything eaten uncooked. The Pexucalm and Sumzzz boards make this easy because the maker assigns a face to meat. With the plastic sets, the size does the work: the large THETCHRY board, or the largest board in the GORILLA GRIP and Empune sets, stays on meat duty while the smaller boards handle produce.
Wash the board after every raw session. The THETCHRY maker states the boards are dishwasher safe, and so do the GORILLA GRIP and Empune makers. The wood picks are different: Bevel & Bond states hand wash with warm soapy water and towel dry, never dishwasher, never soak, and Realgulf states hand wash only with regular mineral oil conditioning. Follow the maker on this, because the finishes differ.
Store the raw board apart from the others so nobody grabs it by mistake. The Sumzzz board has a built-in hanging hole, and the THETCHRY boards have triangular handles for hanging. A hook away from the produce boards removes the moment of confusion that causes cross-contamination in the first place.
Common questions
Does a titanium cutting board work for raw meat?
Yes, if the maker assigns a face to it. The Pexucalm maker states the titanium side is for raw meat and seafood, with the wheat straw PP side for vegetables and fruit. The Sumzzz maker states one side is suitable for meat. Both makers describe the titanium surface as non-porous, which they say reduces absorption of liquids and odors.
Can I use one board for raw meat and vegetables?
Only if the maker gives you two faces or two sizes. The Pexucalm and Sumzzz boards split the faces. The THETCHRY maker assigns the large 15 by 10 inch board to meat and fish and the medium 11 by 8 inch board to vegetables and fruit. Otherwise keep a separate board for raw protein.
Should a raw meat board go in the dishwasher?
It depends on the material. The THETCHRY, GORILLA GRIP and Empune makers all state their plastic boards are dishwasher safe. The Bevel & Bond maker states hand wash with warm soapy water and towel dry, never dishwasher, never soak. The Realgulf maker states hand wash only with regular mineral oil conditioning.
How thick should a board be for breaking down a roast?
Thicker boards are steadier under pressure. The Bevel & Bond maple board is 1.75 inches thick at 10 pounds, and the maker states the weight keeps the board planted under heavy pressure. The FANICHI board is 1.5 inches thick at a listed 6 pounds. The Realgulf teak block is 1 inch thick at 9 pounds.
Do these boards have a juice groove for raw meat?
Several do. The Bevel & Bond maker states a deep juice groove captures runoff from large cuts. The FANICHI maker states the front side has a carved juice groove for meat liquids. The Empune maker states all sides carry a juice groove. The OXO board uses integrated drip-catcher corners and a pour spout instead.
What size board fits a whole chicken or a large roast?
The largest picks are the Realgulf teak block and the Greener Chef bamboo board, both 24 by 18 inches. The Bevel & Bond and FANICHI boards are 17 by 13 inches. The Pexucalm board is 15.4 by 10.4 inches and the Sumzzz board is 16 by 11 inches, which suit smaller cuts rather than a whole bird.
Ready to compare actual models?
Our buying guides put five products side by side on the numbers their makers publish.